1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Sunster A2013SL 12V/24V Controller Monitor Switch with Remote Control. This device is designed to control and monitor car air diesel parking heaters, offering features such as an LCD display, timing settings, and remote operation for enhanced convenience and comfort.
2. Product Overview
The A2013SL controller features an intelligent LCD panel and a remote control for convenient operation. It allows you to pre-heat your vehicle and manage various heater functions.

Figure 1: Sunster A2013SL LCD Panel and Remote Control

Figure 2: Intelligent LCD Panel highlighting 24-hour timing and energy conservation
Key Features:
- Color LCD screen
- 24-hour timing function
- Temperature / Gear regulation
- Language switching (German, English, Russian)
- Fuel filling manual mode
- Automatic temperature calibration
- 8 Fault code display
3. Setup and Installation
The A2013SL controller is designed for universal fit with most car truck heaters operating on 12V or 24V systems. Installation typically involves connecting the controller to your existing heater's wiring harness. Ensure the vehicle's power is off before attempting any connections.
Connection Points:
The controller comes with a wired connector. This connector needs to be integrated into your heater's control circuit. Consult your heater's specific wiring diagram for precise connection points for the controller and power supply.

Figure 3: LCD Panel with wired connector

Figure 4: Back view of the LCD Panel
Initial Configuration:
- **Power On**: After connecting, turn on the vehicle's power. The LCD display should illuminate.
- **Language Setting**: Navigate through the settings menu using the 'SET' key and 'UP/DOWN' buttons to select your preferred language (German, English, Russian).
- **Time Setting**: Set the current time using the 'SET' key and 'UP/DOWN' buttons.
- **Ignition Plug Power Selection**: If applicable to your heater model, select the appropriate ignition plug power setting.
- **Remote Control Pairing**: Follow the instructions in Section 4.2 to pair the remote control.
4. Operating Instructions
4.1 LCD Panel Operation

Figure 5: LCD Monitor with button labels
The LCD panel features four main buttons for operation:
- **ON/OFF Button**: Press to turn the heater on or off.
- **SET KEY**: Used to enter the settings menu and confirm selections.
- **UP/DOWN Buttons**: Used to navigate through menu options, adjust temperature, gear, or time settings.
Common Operations:
- **Adjusting Temperature/Gear**: While the heater is running, use the UP/DOWN buttons to adjust the desired temperature or heating gear.
- **Setting Timer**: Access the timing function through the SET key. You can set a 24-hour timing schedule for automatic heater activation.
- **Fuel Filling Manual Mode**: This mode allows for manual control of fuel delivery, useful for priming the system or specific maintenance tasks.
- **Querying Machine Status**: The display can show the current operational status of the heater.
- **Display Mode**: The digital panel provides clear readouts of all relevant information.
4.2 Remote Control Operation

Figure 6: Remote Control with features

Figure 7: Front view of the Remote Control
The remote control provides convenient wireless operation of your heater. Ensure it is paired with the main controller before use.
Remote Control Pairing:
To pair the remote control, typically you will need to activate a pairing mode on the main LCD panel (refer to the 'Remote control code' setting in the LCD monitor details) and then press a specific button combination on the remote. Consult your heater's manual for exact pairing steps if not detailed here.
Remote Control Functions:
- **Power On/Off**: Turn the heater on or off remotely.
- **Temperature/Gear Adjustment**: Adjust heating levels.
- **Automatic Pump Oil / Quick Operation Pump Oil**: Initiate fuel pump operation for quick starts or priming.
- **Querying Machine Status**: Check the heater's status from a distance.
5. Maintenance
To ensure optimal performance and longevity of your A2013SL controller, follow these general maintenance guidelines:
- **Cleaning**: Wipe the LCD screen and controller housing with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- **Connections**: Periodically check all wiring connections to ensure they are secure and free from corrosion.
- **Remote Control Battery**: Replace the remote control battery as needed. Refer to the remote's casing for battery type and replacement instructions.
- **Environmental Protection**: Keep the controller away from excessive moisture, direct sunlight, and extreme temperatures to prevent damage.
6. Troubleshooting
The A2013SL controller features an 8 fault code display system to assist in diagnosing issues. If your heater or controller is not functioning correctly, check the LCD display for any fault codes.
Common Issues and Solutions:
- **No Display/Power**:
- Check power connections to the controller.
- Ensure the vehicle's battery has sufficient charge.
- **Heater Not Starting**:
- Verify that the controller is correctly connected to the heater.
- Check for any fault codes displayed on the LCD.
- Ensure there is sufficient fuel in the heater's tank.
- **Remote Control Not Responding**:
- Replace the remote control battery.
- Attempt to re-pair the remote control with the main unit (refer to Section 4.2).
- **Incorrect Temperature Reading**:
- Ensure the temperature sensor (if external) is properly connected and positioned.
- The unit features automatic temperature calibration, but extreme conditions might affect readings.
If a fault code is displayed, consult your heater's specific manual or contact customer support with the code for further assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Model | A2013SL |
| Voltage | 12V / 24V (Universal) |
| Material | Plastic |
| Display Type | Color LCD Digital Panel |
| Control Method | 4-key operation, Remote Control |
| Timing Function | 24-hour timing, Countdown mode |
| Fault Display | 8 Fault Codes |
| Language Support | German, English, Russian |
| Package Dimensions (L x W x H) | 12 cm x 12 cm x 12 cm |
| Package Weight | 0.2 kg |
8. User Tips
- **Temperature Range**: While the controller itself operates across a wide range, the effective heating temperature range of your diesel parking heater typically falls within 0-40°C for optimal performance and safety. Always refer to your heater's specific operating limits.
- **Pre-heating**: Utilize the 24-hour timing function to pre-heat your vehicle before you need to use it, ensuring a warm interior upon entry.
- **Energy Conservation**: Adjust the gear regulation settings to balance heating performance with energy consumption, especially during longer periods of use.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.