1. Introduction
Thank you for choosing the Yanhama H5 Cordless Vacuum Cleaner. This manual provides important information on the safe operation, assembly, maintenance, and troubleshooting of your new vacuum cleaner. Please read this manual thoroughly before first use and keep it for future reference.
The Yanhama H5 is a high-performance cordless stick vacuum designed for efficient cleaning across various surfaces. It features powerful suction, a long-lasting detachable battery, and a multi-stage filtration system to ensure a clean and healthy environment.

Figure 1: Yanhama H5 Cordless Vacuum Cleaner Overview
2. Safety Instructions
Please read and understand all safety warnings and instructions before using this appliance to prevent electric shock, fire, and/or serious injury.
- This appliance is for household use only. Do not use outdoors or on wet surfaces.
- Do not allow to be used as a toy. Close attention is necessary when used by or near children.
- Use only as described in this manual. Use only manufacturer's recommended attachments.
- Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or appliance with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
- Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
- Turn off all controls before unplugging.
- Use extra care when cleaning stairs.
- Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without dust cup and/or filters in place.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance.
- Recharge only with the charger specified by the manufacturer.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
3. Package Contents
Carefully unpack your Yanhama H5 Cordless Vacuum Cleaner and check that all items are present and in good condition. Refer to the unboxing video and diagram below for a visual guide.
Video: Yanhama H5 Unboxing and Components Overview

Figure 2: Included Accessories
| Component | Description |
|---|---|
| Main Motor Unit (Head Motor) | Contains the 650W brushless motor and dust cup. |
| LED Floor Brush | V-shaped anti-tangle brush with LED lights for floor cleaning. |
| Telescopic Tube | Extends reach for floor cleaning or high areas. |
| Crevice Tool | For narrow gaps and corners. |
| 2-in-1 Brush | Combines a brush and wide nozzle for versatile cleaning. |
| Battery Pack | Detachable 2000mAh battery. |
| Wall Charging Station | For convenient storage and charging. |
| Power Adapter (Charger) | For charging the battery. |
| HEPA Sponge + Filter | Replacement filter components. |
| Squeegee Mounting Tool | Tool for mounting the charging station. |
| Instruction Manual | This document. |
4. Assembly and Setup
Follow these steps to assemble your Yanhama H5 Cordless Vacuum Cleaner.
- Charge the Battery: Before first use, fully charge the battery for 4-5 hours. The battery can be charged while attached to the main unit or separately.
- Attach the Battery: Slide the fully charged battery pack into the slot on the main motor unit until it clicks into place.
- Assemble for Stick Vacuum Use:
- Connect the Telescopic Tube to the main motor unit.
- Attach the LED Floor Brush to the other end of the Telescopic Tube. Ensure all connections click securely.
- Assemble for Handheld Use:
- Attach desired accessory (Crevice Tool or 2-in-1 Brush) directly to the main motor unit.
- Wall Charging Station Installation (Optional):
- Choose a suitable location near a power outlet.
- Use the provided Squeegee Mounting Tool and screws to securely mount the Wall Charging Station to the wall.
- Place the vacuum cleaner onto the charging station for storage and charging.

Figure 3: Versatile Configurations for Cleaning
5. Operating Instructions
Your Yanhama H5 vacuum cleaner offers multiple suction modes and versatile attachments for various cleaning needs.
5.1 Power On/Off and Suction Modes

Figure 4: Control Panel Functions
- Turn On/Off: Press the "Turn on/off" button on the handle to start or stop the vacuum.
- Adjust Suction Power:
- Use the "Increase suction power" and "Reduce suction" buttons to cycle through the four modes: ECO (15Kpa), Mid (25Kpa), High (38Kpa), and Max (75Kpa).
- The "Auto mode" button may automatically adjust suction based on surface detection (if available on your model).
- Battery Level Indicator: Monitor the battery level on the display to know when recharging is needed.

Figure 5: Suction Power Modes
5.2 Using Attachments
- LED Floor Brush: Ideal for hard floors and carpets. The LED lights illuminate dust and debris, and the V-shaped anti-tangle design prevents hair from wrapping around the brush. It features 90-degree and 180-degree folding for easy maneuverability under furniture.
- Crevice Tool: Perfect for cleaning tight spaces, corners, and edges.
- 2-in-1 Brush: Use the brush for delicate surfaces like upholstery or keyboards, and the wide nozzle for general handheld cleaning.

Figure 6: V-shaped Anti-Tangle Floor Brush

Figure 7: Floor Brush Maneuverability and Lighting
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your vacuum cleaner.
6.1 Emptying the Dust Cup
- Ensure the vacuum is turned off and disconnected from the charger.
- Locate the dust cup release button on the main motor unit.
- Press the button to detach the dust cup.
- Hold the dust cup over a trash bin and open the bottom flap to empty debris.
- Close the flap and reattach the dust cup to the main unit until it clicks.
6.2 Cleaning the Filters
The Yanhama H5 features a 7-stage filtration system. Regular cleaning of filters is crucial for maintaining suction power.

Figure 8: 7-Stage Filtration System
- Disassemble Filters: Twist and pull to remove the filter components from the dust cup. This typically includes the dust cup filter, small hole filter, 12-hole filter, 12-cone cyclonic filter, nonwoven fabric filter, and filter sponge.
- Clean Filters:
- Tap loose dirt from the filters over a trash bin.
- Rinse the washable filter components (check manual for specific washable parts) under cold running water until the water runs clear.
- Do NOT wash the main motor unit or electrical components.
- Dry Filters: Allow all washed filter components to air dry completely for at least 24 hours before reassembling. Do not use a dryer or other heating methods.
- Reassemble: Once completely dry, reassemble the filters in reverse order of disassembly and place them back into the dust cup.
6.3 Cleaning the Floor Brush
- Turn off the vacuum and detach the LED Floor Brush.
- Locate the brush roll release mechanism (usually a latch or button) and remove the brush roll.
- Use scissors or the provided cleaning tool to cut and remove any tangled hair or debris from the brush roll.
- Clean the brush housing and wheels with a damp cloth.
- Reinsert the clean brush roll and secure the release mechanism.
7. Troubleshooting
If you encounter any issues with your Yanhama H5, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum not turning on | Battery not charged; Battery not properly installed; Power button not pressed. | Charge the battery; Ensure battery is clicked into place; Press the power button firmly. |
| Low suction power | Dust cup full; Filters clogged; Blockage in nozzle/tube/brush roll. | Empty dust cup; Clean or replace filters; Check for and remove blockages. |
| Brush roll not spinning | Hair/debris tangled in brush roll; Brush roll jammed; Floor brush not properly attached. | Clean brush roll; Remove any obstructions; Reattach floor brush securely. |
| Short runtime | Battery not fully charged; Using high suction mode continuously; Battery aging. | Fully charge battery; Use lower suction modes for longer cleaning; Consider battery replacement if significantly degraded. |
| Unusual noise | Blockage in air path; Loose component; Motor issue. | Check for and remove blockages; Ensure all parts are securely assembled; Contact customer support if noise persists. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Yanhama |
| Model | H5 |
| Suction Power | Up to 75KPA (Max Mode) |
| Motor Power | 650W Brushless Motor |
| Dust Box Capacity | 1.6 Liters |
| Filtration System | 7-Stage HEPA Filtration, 12-Cone Cyclonic Filter (filters 99.99% of particles under 0.1µm) |
| Battery Type | Detachable 2000mAh Lithium-ion |
| Runtime | ECO Mode: Up to 70 minutes Mid Mode: Up to 35 minutes High Mode: Up to 28 minutes Max Mode: Up to 15 minutes |
| Charging Time | 4-5 hours |
| Voltage | 110V-240V |
| Function | Dry |
| Floor Brush Features | V-shaped Anti-Tangle, LED Lights, 90/180-degree folding, Large double-sided wheels |
| Included Accessories | Telescopic Tube, Crevice Tool, 2-in-1 Brush, Wall Charging Station, Power Adapter, HEPA Sponge + Filter, Squeegee Mounting Tool |

Figure 9: Motor and Filtration System Details
9. User Tips
- For optimal battery life, avoid fully discharging the battery frequently. Charge it after each significant use.
- Regularly check and clean the brush roll, especially if you have pets, to prevent hair tangles and maintain cleaning efficiency.
- The LED lights on the floor brush are excellent for revealing hidden dust under furniture or in dimly lit areas. Utilize them to ensure thorough cleaning.
- For quick clean-ups or car interiors, detach the main unit and use it as a powerful handheld vacuum with the appropriate attachment.
- Always ensure the dust cup is properly seated and filters are correctly installed before operating to prevent damage and maintain suction.
10. Warranty and Support
Your Yanhama H5 Cordless Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, spare parts, or any questions not covered in this manual, please contact Yanhama customer service. Contact information can typically be found on the product packaging or the official Yanhama website.