ATK RS6 Air Gaming Keyboard User Manual

1. Introduction

Thank you for choosing the ATK RS6 Air Gaming Keyboard. This high-performance magnetic switch keyboard is designed for an exceptional gaming experience, offering ultra-low latency, high polling rates, and precise actuation. This manual provides detailed instructions on setting up, operating, and maintaining your keyboard to ensure optimal performance.

2. Product Overview

2.1 Key Features

• Magnetic Switches: Advanced magnetic shaft solution for rapid and precise actuation.
• Ultra-Low Latency: Full-link trigger latency as low as 0.35ms and end-to-end RT release delay of 0.28ms.
• High Polling Rate: 8KHz polling rate for instant response.
• Extreme Precision: RT accuracy of 0.001mm.
• Customizable RGB Lighting: 16 million color RGB lighting effects.
• Durable Keycaps: PBT plastic, dye-sublimation printed PC keycaps.
• Hot-Swappable Switches: Allows for easy switch replacement.
• Adjustable 0 Dead Zone: Fine-tune actuation points for personalized control.
• Compatibility: Supports Windows, MacOS, and Linux operating systems.
• Connectivity: 2.4Ghz Wireless and USB wired connection.

2.2 Package Contents

The ATK RS6 Air Gaming Keyboard package includes the following items:

• ATK RS6 Air Keyboard
• 1.5m 8K Custom ATK Data Cable
• Silicone Model with 4 Additional Switches
• Brand Personality Stickers x2
• Warranty Card
• Product Instruction Manual (this document)
• Additional Contrast Color Keycaps x3
• Keycap/Switch Puller
• Spacebar Mute Foam

2.3 Keyboard Components

• Laser Engraved Metal Nameplate: Located on the side, displaying the 'RS6 Air' logo.
• Light Blade LOGO Light: Integrated lighting element near the logo.
• Top Fog Translucent Keycaps: Keycaps designed for enhanced RGB lighting display.
• Mech Wing Mirror: A design element on the side of the keyboard, often featuring lighting.

3. Specifications

4. Setup Guide

4.1 Connecting the Keyboard

1. Wired Connection: Connect the provided 1.5m 8K Custom ATK Data Cable to the USB port on your computer and the corresponding port on the keyboard. The keyboard should be recognized automatically by your operating system.
2. Wireless Connection (2.4Ghz): The keyboard supports 2.4Ghz wireless connectivity. Insert the 2.4Ghz USB receiver (if included, typically found in a compartment on the keyboard) into an available USB port on your computer. The keyboard should pair automatically.

4.2 Driver Installation (ATK HUB 3.0)

For full customization and advanced features, it is recommended to install the ATK HUB 3.0 software.

1. Visit the official ATKGEAR website (www.ATKGEAR.com) to download the latest version of the ATK HUB 3.0 software.
2. Follow the on-screen instructions to install the software on your Windows, MacOS, or Linux system.
3. Once installed, launch ATK HUB 3.0 to access keyboard settings, RGB customization, key remapping, and other advanced functions.

5. Operating Instructions

5.1 RGB Lighting Control

The ATK RS6 Air keyboard features a dynamic light effect system with 16 million color RGB lighting. Lighting effects can be customized through the ATK HUB 3.0 software. Refer to the software's user interface for options such as:

• Brightness adjustment
• Effect modes (e.g., static, breathing, wave, reactive)
• Color selection
• Speed adjustment
• Music rhythm synchronization

5.2 Key Remapping and Macros

Utilize the ATK HUB 3.0 software to remap keys, create custom macros, and assign specific functions (e.g., RT, 5OCD) to individual keys. This allows for personalized control and optimized workflow or gaming performance.

5.3 Adjustable 0 Dead Zone

The magnetic switches allow for an adjustable 0 dead zone, meaning you can precisely set the actuation point of each key. This feature is crucial for competitive gaming, enabling faster and more consistent inputs. Adjust these settings within the ATK HUB 3.0 software to find your preferred actuation depth.

5.4 Hot-Swappable Switches

The ATK RS6 Air keyboard supports hot-swappable switches, allowing you to easily change switches without soldering. Use the provided switch puller to carefully remove existing switches and insert new ones. Ensure the new switches are compatible with magnetic switch keyboards.

6. Maintenance

6.1 Cleaning the Keyboard

• Keycaps: Use the provided keycap puller to remove keycaps. Clean them with a mild soap solution and a soft cloth, then rinse and dry thoroughly before reattaching.
• Keyboard Body: Wipe the keyboard surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
• Between Keycaps: Use compressed air to remove dust and debris from between the switches. A small brush can also be used for stubborn particles.

6.2 Switch Care

While magnetic switches are generally durable, avoid excessive force when removing or inserting them. If a switch feels gritty or unresponsive, it may need cleaning or replacement. Use the provided additional switches if necessary.

7. Troubleshooting

• Keyboard Not Responding:
  • Ensure the USB cable is securely connected to both the keyboard and the computer.
  • If using wireless, ensure the 2.4Ghz receiver is properly inserted and the keyboard is powered on.
  • Try connecting to a different USB port.
  • Restart your computer.
• RGB Lighting Issues:
  • Check the ATK HUB 3.0 software for lighting settings and ensure they are configured correctly.
  • Important Note: If the light brightness is set too high, or if the computer's USB interface lacks sufficient power, the keyboard may run unstably. Please set the light brightness with caution and ensure your USB port provides adequate power.
• Keys Not Registering or Double-Typing:
  • This could indicate a faulty switch. Use the switch puller to replace the problematic switch with one of the spares.
  • Ensure the switch is fully seated when inserting.
  • Check the RT adjustment settings in ATK HUB 3.0; incorrect settings might cause unexpected behavior.
• Software Not Detecting Keyboard:
  • Ensure the keyboard is connected and powered on.
  • Close and restart the ATK HUB 3.0 software.
  • Reinstall the ATK HUB 3.0 software.
  • Ensure your operating system is up to date.

8. User Tips

• Experiment with RT Adjustment: Take time to fine-tune the actuation point (RT adjustment) for different games or tasks using the ATK HUB 3.0 software. A lower actuation point can provide a competitive edge in fast-paced games.
• Custom Keycaps: The PC keycaps are designed for optimal RGB diffusion. Consider exploring additional contrast keycaps for a personalized aesthetic.
• Firmware Updates: Regularly check the ATKGEAR website for firmware updates for your keyboard. Updates can improve performance, add new features, or fix bugs.

9. Warranty and Support

Your ATK RS6 Air Gaming Keyboard comes with a manufacturer's warranty. Please refer to the included Warranty Card for specific terms and conditions, including warranty duration and coverage details.

For technical support, driver downloads, FAQs, and additional product information, please visit the official ATKGEAR website: www.ATKGEAR.com.

When contacting support, please have your product model (RS6 Air) and serial number (if applicable) ready.