Important Safety Information
⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
Always perform a pre-ride inspection to ensure all components are in good working order. Familiarize yourself with local ebike regulations before riding.
1. Package Contents
Before assembly, please verify that all components are present in the package:
- Ebike x1
- Rear Rack x1
- Riding Bag x1
- Battery Charger x1
- Air Pump & Tools x1
2. Setup and Assembly
The SMARTRAVEL DK401 Ebike requires some assembly before its first use. Please follow these general steps:
- Unpack Components: Carefully remove all parts from the packaging. Retain packaging for future transport or storage.
- Install Handlebars: Attach the handlebars to the stem, ensuring they are centered and tightened securely. Refer to the handlebar controls diagram for component identification.
- Attach Front Wheel: Secure the front wheel, ensuring the disc brake rotor is correctly aligned with the caliper.
- Install Pedals: Identify left (L) and right (R) pedals. Thread them into the crank arms and tighten firmly. Note that the left pedal is reverse-threaded.
- Adjust Seat: Insert the seat post into the frame and adjust the seat height to a comfortable riding position. Secure with the quick-release lever.
- Install Rear Rack and Riding Bag: Attach the rear rack and riding bag using the provided hardware.
- Initial Battery Charge: Fully charge the battery before the first ride. Refer to the 'Battery Charging' section for details.
3. Operating Instructions
3.1 Powering On/Off
Locate the power button on the handlebar controls. Press and hold to turn the ebike on or off. The LCD display will illuminate upon power-on.
3.2 Riding Modes
The SMARTRAVEL DK401 offers versatile riding options:
- Single Bike Model: Ride as a traditional bicycle without electric assistance.
- 5 Levels of Pedal Assist (PAS Mode): The motor provides assistance as you pedal. Adjust the assist level via the LCD display controls. Offers up to a 40-mile range.
- Throttle Electric Mode: Use the twist-grip throttle for electric propulsion without pedaling. Offers up to a 28-mile range.
- Dual Motor + Throttle: Combines pedal assist with throttle for maximum power.
- Walk Mode: Provides low-speed assistance for walking the bike.
3.3 Gear Shifting
The ebike is equipped with a Professional Shimano 7-speed shifting system. Use the 7-speed shifter gear key on the handlebars to change gears, adapting to different terrains and riding conditions.
3.4 LCD Display
The Smart LCD Display provides essential riding information:
- PAS Mode: Indicates the current pedal assist level.
- Total Mileage: Displays the total distance traveled.
- Current Speed: Shows your real-time speed.
- Battery: Indicates the remaining battery charge.
- Colorful Display: Provides clear and easy-to-read information.
3.5 Braking System
The ebike features a Dual Disc Brake System for safer and more reliable stopping power. Apply both front and rear brakes smoothly and simultaneously for effective braking.
3.6 Suspension System
The Dual Suspension System, including two front fork shock absorbers and a 1000LBS rear shock absorber, effectively minimizes impact from bumps, ensuring a smoother and safer ride experience.
4. Maintenance
4.1 Battery Care
The 48V 18.2Ah Lithium Battery is designed with multiple protections:
- Charging: Use only the provided charger. A full charge takes approximately 5 hours.
- Removal: The battery is easy to remove for charging or storage, and a lock ensures its safety.
- Protection: The battery includes overcharge, overdischarge, overcurrent, and short-circuit protection, along with dustproof/waterproof features and a BMS power saving system.
- Storage: Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. Charge it to about 50-70% if storing for extended periods.
4.2 Tire Care
The ebike is equipped with 20*4.0 inch anti-slip & all-terrain fat tires, suitable for various conditions including snow, daily commute, beach, and gravel roads.
- Tire Pressure: Maintain recommended tire pressure for optimal performance and safety. Check regularly.
- Inspection: Regularly inspect tires for wear, punctures, or damage.
4.3 General Maintenance
- Cleaning: Clean the ebike regularly with a damp cloth. Avoid high-pressure washing directly on electrical components.
- Brakes: Check brake pads for wear and ensure brake levers are responsive. Adjust as needed.
- Chain: Keep the chain clean and lubricated for smooth gear changes and to prevent rust.
- Fasteners: Periodically check and tighten all bolts and fasteners.
5. Troubleshooting
This section provides basic troubleshooting steps for common issues. For more complex problems, please contact customer support.
- Ebike not powering on:
- Check if the battery is properly inserted and locked.
- Ensure the battery is charged.
- Verify all cable connections are secure.
- Motor not assisting:
- Check the battery level.
- Ensure the pedal assist level is not set to zero.
- Verify the throttle is engaged (if using throttle mode).
- Brakes feel weak:
- Inspect brake pads for wear and replace if necessary.
- Check brake cable tension and adjust.
- Ensure disc rotors are clean and free of oil/grease.
6. Specifications
Detailed specifications for the SMARTRAVEL DK401 Ebike:
| Feature | Specification |
|---|---|
| Model Number | SMARTRAVEL DK401 |
| Certification | CE |
| Rated Passenger Capacity | One Seat |
| Style | Standard Type |
| Max Speed | <25km/h (28 MPH Peak) |
| Range per Power | 31 - 60 km (24-40 miles depending on mode) |
| Wattage | 200 - 250w (1200W Peak Motor) |
| Power Supply | Lithium Battery |
| Voltage | 48V |
| Battery Capacity | 18.2Ah |
| Charging Time | Approx. 5 hours (Fast charging) |
| Motor Type | Brushless |
| Wheel Size | 20“ (20*4.0" Fat Tire) |
| Folded | No |
| Climbing Angle | 25° |
| Suspension | Dual (Front fork shock absorber*2, 1000LBS Rear shock absorber) |
| Load Capacity | 330LBS |
| Bike Weight | 68LBS |
6.1 Dimensions
- Total Length: 68.9"
- Total Height: 42.3"
- Wheel Base: 46.5"
- Chain Stay Length: 18.9"
- Handle Bar Width: 25"
- Seat Height: 32.3"
- Wheel Diameter: 20"
- Recommended Rider Height: 5'3" - 5'9"
7. Warranty and Support
For any questions regarding assembly, maintenance, accessories, or product inquiries, please contact our customer support team. We are here to assist you with your SMARTRAVEL DK401 Ebike.
Please refer to your purchase documentation for specific warranty terms and contact information.
8. User Tips
- Regular Checks: Make it a habit to check tire pressure, brake function, and battery charge before each ride.
- Gear and Assist: Experiment with different gear and pedal assist combinations to find the most efficient and comfortable riding experience for various terrains.
- Battery Longevity: Avoid completely draining the battery. Charge it regularly, especially if the ebike will be unused for a while.
- Secure Battery: Always ensure the battery is securely locked in place to prevent theft and ensure stable operation during rides.