1. Introduction
Thank you for choosing the Mibro Earbuds 5. These True Wireless Stereo (TWS) earbuds are designed to provide a superior audio experience with advanced features like Bluetooth 5.4 connectivity, HD call quality, and Environmental Noise Canceling (ENC) for calls. Their lightweight and waterproof design makes them ideal for sports and daily use.
Package Contents:
- Mibro Earbuds 5 (Left and Right)
- Charging Case
- USB Charging Cable
- User Manual
2. Specifications
| Feature | Specification |
|---|---|
| Brand | Mibro |
| Model | Earbuds 5 |
| Material | Silica Gel |
| Earbud Weight | 3.5g (each earbud) |
| Earbud Dimensions (approx.) | 18.8mm (width) |
| Charging Case Dimensions (approx.) | 55.7mm (width) x 46.6mm (height) |
| Battery Capacity (Earbuds) | 40-50mAh |
| Battery Life (Single Charge) | 5-6 hours |
| Total Playtime (with Charging Case) | Up to 20 hours |
| Charging Method | Cable (USB) |
| Bluetooth Version | 5.4 |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Vocalism Principle | Dynamic |
| Driver Diameter | 13mm |
| Frequency Response Range | 20 - 20Hz |
| Impedance Range | up to 32 Ω |
| Resistance | 32 Ω |
| Sensitivity | 95dB |
| Total Harmonic Distortion | 1% |
| Audio Codecs | AAC |
| Microphone | Yes |
| Voice Assistant | Yes (built-in) |
| Control | Touch Control, Volume Control, Control Button |
| Noise Cancellation | ENC (Environmental Noise Canceling for calls) |
| Active Noise Cancellation (ANC) | No |
| Sound Isolating | Yes |
| Earcups Type | Sealed |
| Headphone Pads Material | Silicone |
| Waterproof Rating | IPX4 (earbuds only, charging case not water-resistant) |
| Support APP Control | No (for dedicated app) |
| NFC Technology | No |
| Support Memory Card | No |
| Certification | CE |
| Origin | Mainland China |
3. Setup and Pairing
Initial Setup:
- Open the charging case. The earbuds will automatically power on.
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for "Mibro Earbuds 5" in the list of available Bluetooth devices.
- Select "Mibro Earbuds 5" to pair. You will hear a confirmation tone once connected.
Auto-Pairing:
After the initial setup, your earbuds will automatically pair with your device every time you take them out of the charging case.
Independent Use:
Each earbud can be used independently. You can use either the left or right earbud on its own for calls or music.
4. Operating Instructions
Intuitive Touch Controls:
The Mibro Earbuds 5 feature intuitive touch controls on each earbud. The touch area is typically located on the outer surface of the earbud stem.
- Double Tap (Either Earbud): Answer/End calls, Play/Pause music.
- Long Press (Either Earbud): Activate voice assistant.
- Triple Tap (Left Earbud): Previous track.
- Triple Tap (Right Earbud): Next track.
HD Call Quality & ENC Noise Canceling:
Enjoy crystal-clear calls with the HD call feature. The Environmental Noise Canceling (ENC) technology helps to block out ambient sounds during calls, ensuring your voice is heard clearly by the other party.
5. Maintenance
Charging:
To charge your Mibro Earbuds 5, place them back into the charging case. Connect the charging case to a power source using the provided USB cable. The charging case features smart battery management with comprehensive protection against overcharging, overcurrent, short circuit, and voltage fluctuation.
The earbuds provide 5-6 hours of playtime on a single charge, and the charging case extends the total playtime to up to 20 hours.
Water Resistance:
The Mibro Earbuds 5 are IPX4-rated, offering protection against splashes and sweat. This makes them suitable for workouts and outdoor activities. Please note: The IPX4 water resistance applies to the earbuds only. The charging case is NOT water-resistant.
Cleaning:
To maintain optimal performance and hygiene, regularly clean your earbuds and charging case. Use a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used on the earbuds, but ensure they are completely dry before placing them back in the charging case. Do not use harsh chemicals or abrasive materials.
6. Troubleshooting
- Earbuds not pairing: Ensure both earbuds are charged and out of the case. Turn off and on your device's Bluetooth, then try pairing again.
- Only one earbud working: Place both earbuds back into the charging case, close the lid, wait a few seconds, then take them out again. This often re-syncs them.
- Low volume: Check the volume settings on both your connected device and the earbuds (if volume control is available via touch).
- Sound quality issues: Ensure earbuds are clean and properly seated in your ears. Try disconnecting and reconnecting the Bluetooth connection.
- Charging case not charging: Ensure the USB cable is securely connected to both the case and the power source. Try a different cable or power adapter.
7. Warranty and Support
Mibro products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or contact Mibro customer support. Keep your proof of purchase for any warranty claims.
For technical support or further assistance, please visit the official Mibro website or contact their customer service channels.