Anpviz 4K 8-Channel PoE NVR User Manual

1. Introduction

This manual provides detailed instructions for the Anpviz 8CH 4K PoE NVR (Network Video Recorder), designed for comprehensive surveillance systems. It supports 4K Ultra HD resolution, H.265 video compression, and features smart motion detection with alerts. This NVR is specifically designed for plug-and-play compatibility with Anpviz U Series PoE Cameras.

2. What's in the Box?

Please check the package contents upon receipt to ensure all items are present:

• 1 x Anpviz 8-Channel NVR
• 1 x NVR Power Adapter
• 1 x USB Mouse
• 1 x Quick Guide (Printed Manual)
• 1 x HDMI Cable
• 1 x 1M Network Cable
• 1 x 2TB Hard Drive (Pre-installed)

3. Setup

3.1 Physical Connections

Follow these steps to connect your NVR and cameras:

1. Connect your Anpviz U Series PoE cameras to the NVR's PoE ports using Ethernet cables.
2. Connect the NVR to a monitor or TV using the HDMI or VGA port.
3. Connect the included USB mouse to a USB 2.0 port on the NVR.
4. Connect the NVR's Ethernet port to your router's LAN port using the network cable for internet access.
5. Connect the NVR power adapter to the NVR and then to a power outlet.

3.2 Initial Configuration

Upon first boot, the NVR will guide you through an initial setup wizard. The default username for the NVR is admin and the default password is 123456. It is highly recommended to change the default password immediately for security reasons.

4. Operating the NVR

4.1 24/7 Video Recording

The NVR supports continuous 24/7 recording. With the pre-installed 2TB HDD, you can store a significant amount of footage. If cameras also have SD cards, video will be recorded on both the SD card and the NVR, providing redundancy.

The NVR utilizes H.265 video compression, which reduces storage space and bandwidth usage by up to 50% compared to H.264, while maintaining clear image quality.

4.2 Smart Playback and AI Detection

The NVR supports smart playback features, including human and vehicle detection, allowing you to quickly review relevant events. AI features are dependent on the connected camera models, as the NVR itself does not have built-in AI capabilities.

4.3 Remote Access and Alerts

Access your surveillance system remotely and receive instant alerts:

• Mobile Access: Use the "Guard Viewer" app on your smartphone (iPhone OS, Android) for real-time alerts, remote viewing, and replaying critical moments.
• PC Client: Use the "Guard Station" application on your computer (Microsoft Windows XP, Windows 7, macOS) for local access and management.

Configure motion detection schedules and receive alerts via email or app push notifications. The system can differentiate between people and vehicles to minimize false alarms.

5. Maintenance

5.1 Hard Drive Management

The NVR supports hard drives up to 10TB. Regularly check the hard drive status through the NVR's interface to ensure optimal recording performance. If you need to replace or upgrade the hard drive, refer to the detailed instructions in the full product manual or contact support.

5.2 Firmware Updates

To ensure your NVR operates with the latest features and security patches, it is recommended to keep its firmware updated. Firmware upgrade software for U series NVRs can be found on the official Anpviz website under the 'firmware' section for your specific model.

6. Troubleshooting (FAQ)

Q: Can I connect a PoE switch connected camera through the NVR?

A: Yes, as long as the external PoE-connected camera and NVR are in the same LAN and support the ONVIF protocol.

Q: What is the default username and password of the NVR?

A: The default username is admin, and the default password is 123456. Please change this immediately after initial setup.

Q: How many cameras does the 8CH NVR support?

A: The 8CH NVR supports up to 8 4K cameras.

Q: Which app does the NVR use?

A: The camera is compatible with the "Guard Viewer" app for mobile devices.

Q: How do I find the device encryption password / verification code?

A: For DVR/NVR: Access the local monitor or TV, navigate to Device Menu > Configuration > Network Settings > Platform Access View. For IPC/DVR/NVR: Access via web page, navigate to Configuration > Network Settings > Platform Access View.

Q: Can this camera connect to any NVR?

A: Yes, all NVRs or VMSs that support the ONVIF protocol can be connected.

Q: How to find and download U NVR upgrade software?

A: You can visit the Anpviz official website, go to the 'firmware' section, select 'U series NVRs', and download the upgrade software for your corresponding model.

7. Specifications

8. User Tips

• For optimal performance and security, always change the default NVR password immediately after initial setup.
• Ensure your NVR and any external PoE-connected cameras are on the same local area network (LAN) for seamless integration, especially if they are not Anpviz U Series cameras.
• Regularly check for and install firmware updates from the official Anpviz website to benefit from new features and security enhancements.
• When configuring motion detection, fine-tune the sensitivity settings to reduce false alarms caused by environmental factors like shadows or small animals.

9. Warranty & Support

Anpviz offers a 15-month warranty from the date of purchase. During this period, you can contact the support team for assistance with any issues. For support, please refer to the contact information provided with your product or on the official Anpviz website.

If an item is defective, you must notify Anpviz immediately. Products may be returned for refund or replacement within 15 days of receiving the item. Returned merchandise must be unused, in original packaging, and include all accessories. Please contact the seller prior to any return to ensure validity.