AIMOS KCEVE 801 / KCEVE 1001

Contents

AIMOS KVM Switch User Manual

Models: KCEVE 801 (8-Port) / KCEVE 1001 (10-Port)

Brand: AIMOS

1. Introduction

The AIMOS KVM Switch allows you to control multiple computers (8 or 10, depending on the model) from a single set of keyboard, mouse, and monitor. This device is designed to streamline your workspace, offering seamless switching between connected PCs while maintaining high-quality video output and fast USB data transfer. It supports EDID simulation to prevent display issues during switching and is compatible with a wide range of operating systems and HDMI source devices.

KVM Switch overview showing HDMI In and Out devices
Figure 1: KVM Switch overview, illustrating HDMI input sources (Desktops, Laptops, PS5/PS4 PRO, Switch) and HDMI output displays (Monitor, TV, Projector). The image also highlights 'HDMI+USB KVM Switch 8 Computers 1 Monitor' and 'With Audio' features.
Space Saving illustration comparing setups with and without KVM switch
Figure 2: Space Saving illustration. The top image shows a clean desk setup with a KVM switch controlling 8 PCs with one keyboard, mouse, and monitor. The bottom image shows a cluttered setup without a KVM switch, requiring multiple peripherals and monitors.

2. Product Models

This KVM switch is available in two main models, KCEVE 801 and KCEVE 1001, differing primarily in the number of supported computer inputs.

2.1. KCEVE 801 (8-Port KVM Switch)

The KCEVE 801 model allows you to connect and control up to 8 computers using a single monitor, keyboard, and mouse. It features 4 USB 3.0 ports for sharing peripherals.

Image of KCEVE 801 KVM Switch
Figure 3: Front view of the KCEVE 801 KVM Switch.

2.2. KCEVE 1001 (10-Port KVM Switch)

The KCEVE 1001 model expands connectivity to support up to 10 computers, sharing one monitor, keyboard, and mouse. Like the 801, it includes 4 USB 3.0 ports for peripheral sharing.

Image of KCEVE 1001 KVM Switch
Figure 4: Front view of the KCEVE 1001 KVM Switch.

3. Key Features

  • Multi-Computer Control: Control 8 (KCEVE 801) or 10 (KCEVE 1001) computers from a single console (keyboard, mouse, monitor).
  • EDID Simulation: Stores display's native resolution and refresh rate, ensuring original window layouts are preserved when switching between computers.
  • Ultra HD 4K@60Hz: Supports resolutions up to 3840*2160@60Hz, 4K@60Hz, and 1080P@144Hz. Backward compatible with lower resolutions. Compatible with ultrawide monitors.
  • USB 3.0 Ports: Four USB 3.0 ports for sharing peripherals (keyboard, mouse, printer, U disk, card reader, headphones, hard disk, webcam) with data transfer speeds up to 5Gbps (10x faster than USB 2.0).
  • Multiple Switching Modes: Switch between computers using front-panel buttons, IR remote control, hotkey commands, or RS232 interface.
  • Wide Compatibility: Plug-and-play, driver-free for Windows, Mac OS, Linux, and Chrome OS. Compatible with HDMI source devices like Desktops, Laptops, PS5, PS4, TV Box, Docking stations. Supports USB-C/mini DP/VGA to HDMI converters or cables.
  • Audio Support: Integrated audio functionality.
  • Durable Design: Features an iron metal housing for exceptional durability and strength.
  • Power Adapter and ON-OFF Switch: Includes a 12V/2A power adapter for stable operation and an ON/OFF switch for convenience.
Audio and Video Synchronization with 4K@60Hz and 1080P@144Hz
Figure 5: Illustrates Audio and Video Synchronization, supporting 3840*2160@60Hz, 4K@60Hz, and 1080P@144Hz. Note: For 4K@60Hz output, both computer and monitor must support 4K60Hz, and a high-quality HDMI 2.0 cable is recommended.
USB 3.0 speed comparison
Figure 6: USB 3.0 offers 10X faster data transfer (5Gbps) compared to USB 2.0 (480Mbps).
No Driver Installation Required
Figure 7: The KVM switch is plug-and-play, requiring no driver installation and offering wide compatibility with various operating systems.

4. Package Contents

Please check the package carefully to ensure all items are present and undamaged.

4.1. KCEVE 801 Package List

  • 1x KVM Switch (8-in-1-out)
  • 1x IR Remote Control
  • 8x USB 3.0 A-A Cable (1.5m)
  • 1x HDMI Cable (1.5m)
  • 1x Power Adapter (12V)
  • 1x User Manual
KCEVE 801 Package List
Figure 8: Contents of the KCEVE 801 package.

4.2. KCEVE 1001 Package List

  • 1x HDMI KVM Switch (10-Port)
  • 10x USB 3.0 Cable (1.5M)
  • 1x Wired Remote (1.5M)
  • 1x Power Adapter (12V)
  • 1x User Manual
KCEVE 1001 Package List
Figure 9: Contents of the KCEVE 1001 package.

5. Setup Instructions

Follow these steps to connect your KVM switch:

  1. Power Off Devices: Ensure all computers and the monitor are powered off before making any connections.
  2. Connect Monitor: Connect your monitor to the 'Monitor' HDMI output port on the KVM switch.
  3. Connect Computers (HDMI): Connect each computer's HDMI output to the corresponding 'PC 1' through 'PC 8' (KCEVE 801) or 'PC 1' through 'PC 10' (KCEVE 1001) HDMI input ports on the KVM switch.
  4. Connect Computers (USB): For each computer, connect one end of a USB 3.0 A-A cable to a USB 3.0 port on your computer and the other end to the corresponding 'USB 3.0' input port (labeled PC1-PC8/PC1-PC10) on the KVM switch. These are typically located next to the HDMI input ports for each PC.
  5. Connect Peripherals: Connect your keyboard, mouse, and other USB 3.0 devices (e.g., printer, U disk) to the dedicated USB 3.0 ports on the front panel of the KVM switch.
  6. Connect Power: Plug the 12V power adapter into the 'DC/12V' port on the KVM switch and then into a power outlet.
  7. Power On: Turn on the KVM switch using the ON/OFF switch, then power on your monitor and computers.
KCEVE 801 Connection Diagram
Figure 10: Connection diagram for KCEVE 801. Shows HDMI inputs for up to 8 devices, USB 3.0 inputs for each PC, HDMI output to monitor, DC/12V power input, and front panel ports for USB peripherals, IR remote, and control buttons.
KCEVE 1001 Connection Diagram
Figure 11: Connection diagram for KCEVE 1001. Illustrates connecting 10 PCs to the KVM switch, with shared USB peripherals and a single monitor output.

6. Operation

The KVM switch offers several methods for switching between connected computers:

6.1. Front-Panel Button Switching

Press the numbered buttons (1-8 for KCEVE 801, 1-10 for KCEVE 1001) on the front panel of the KVM switch to directly select the corresponding PC. LED indicators will show which computer is currently active.

Switching methods: Button, IR Remote, Hotkey
Figure 12: Demonstrates switching between computers using the front-panel buttons, IR remote control, and keyboard hotkeys.

6.2. IR Remote Control Switching

Use the included IR remote control to switch between computers. Point the remote at the IR receiver on the KVM switch and press the desired PC number button.

6.3. Hotkey Switching

Specific keyboard hotkey commands can be used for quick switching. Refer to the hotkey section in the full user manual for detailed commands.

6.4. Wired Remote Switching (KCEVE 1001 only)

The KCEVE 1001 model includes a wired remote control (1.5m length) with a digital screen display for easy selection of the active computer.

KCEVE 1001 Wired Remote Switching
Figure 13: KCEVE 1001 wired remote control for switching between PCs.

6.5. RS232 Control

The KVM switch supports RS232 control for advanced users who wish to integrate it into automated systems or use custom software for switching. The baud rate for RS232 communication is 115200.

Table 1: RS232 Switching Commands (KCEVE 1001)
Command Function
X1,1$Switch to PC 1
X2,1$Switch to PC 2
X3,1$Switch to PC 3
X4,1$Switch to PC 4
X5,1$Switch to PC 5
X6,1$Switch to PC 6
X7,1$Switch to PC 7
X8,1$Switch to PC 8
X9,1$Switch to PC 9
XA,1$Switch to PC 10
RS232 Switching Command Table
Figure 14: Visual representation of the RS232 switching command table for KCEVE 1001.

6.6. TTL Control Section

The TTL control interface allows for switching via a 3-pin audio jack connector. This is an advanced feature and non-technical personnel should exercise caution. It is recommended to use a USB to TTL cable, purchased separately.

Table 2: TTL Control Switching Commands (KCEVE 801)
ASCII Command HEX Command Function
X1,1$0x58 0x31 0x2C 0x31 0x24Switch to PC 1
X2,1$0x58 0x32 0x2C 0x31 0x24Switch to PC 2
X3,1$0x58 0x33 0x2C 0x31 0x24Switch to PC 3
X4,1$0x58 0x34 0x2C 0x31 0x24Switch to PC 4
X5,1$0x58 0x35 0x2C 0x31 0x24Switch to PC 5
X6,1$0x58 0x36 0x2C 0x31 0x24Switch to PC 6
X7,1$0x58 0x37 0x2C 0x31 0x24Switch to PC 7
X8,1$0x58 0x38 0x2C 0x31 0x24Switch to PC 8
X9,1$0x58 0x39 0x2C 0x31 0x24Turn off the KVM
XA,1$0x58 0x41 0x2C 0x31 0x24Turn on the KVM
TTL Control Instructions and Wiring Diagram
Figure 15: TTL Control Interface instructions and wiring diagram. Note: This interface requires a 3-pin audio jack connector. Non-technical personnel should not attempt this operation. A USB to TTL cable is recommended.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the KVM switch. Do not use liquid or aerosol cleaners.
  • Ventilation: Ensure the KVM switch is placed in a well-ventilated area to prevent overheating. Do not block ventilation openings.
  • Power Management: Always use the provided 12V/2A power adapter. When not in use for extended periods, you can turn off the KVM switch using its ON/OFF button without unplugging cables.
  • Cable Management: Keep cables organized and free from kinks or excessive bending to ensure optimal performance and longevity.

8. Troubleshooting

No display on monitor after switching:
Ensure all HDMI cables are securely connected. Verify that both your computer and monitor support the selected resolution and refresh rate (e.g., 4K@60Hz). Try using a high-quality HDMI 2.0 cable. Power cycle the KVM switch and the affected computer.
Keyboard or mouse not responding:
Check USB cable connections from the KVM to the computers and from peripherals to the KVM. Try connecting the keyboard/mouse to different USB 3.0 ports on the KVM. Ensure the correct PC is selected on the KVM switch (check LED indicators). Some specialized gaming keyboards/mice may require direct connection to the PC or specific drivers; try a standard keyboard/mouse to isolate the issue.
USB 3.0 devices not detected or slow transfer speeds:
Confirm that the USB 3.0 cables are properly connected and that your computer's USB ports are functioning correctly. Ensure the KVM switch is receiving adequate power from the 12V/2A adapter, especially when connecting high-power USB devices.
Window layout changes after switching:
The KVM switch features EDID simulation to prevent this. If it occurs, ensure the KVM switch is powered on and functioning correctly. This issue is typically resolved by the EDID simulation feature.
KVM switch does not power on:
Check the power adapter connection to both the KVM switch and the power outlet. Ensure the ON/OFF switch on the KVM is in the 'ON' position. Try a different power outlet.

9. User Tips

  • For optimal 4K@60Hz performance, always use high-quality HDMI 2.0 cables and ensure both your computer's graphics card and monitor support this resolution and refresh rate.
  • When connecting high-power USB devices, ensure the KVM switch is powered by the included 12V/2A adapter to guarantee stable recognition and operation.
  • If you experience any display or peripheral issues, a simple power cycle of the KVM switch (turn off, wait 10 seconds, turn on) can often resolve them.
  • Utilize the hotkey switching feature for faster and more convenient transitions between computers, especially if the KVM switch is not easily accessible.

10. Specifications

Feature Description
Model NumbersKCEVE 801 (8-Port), KCEVE 1001 (10-Port)
TypeUSB Adapter (KVM Switch)
Video InputHDMI
Video OutputHDMI
Max Resolution4K@60Hz (3840*2160@60Hz), 1080P@144Hz
USB Ports4 x USB 3.0 (for peripherals)
USB Data Transfer RateUp to 5Gbps
Switching MethodsFront-panel buttons, IR remote, Hotkey, RS232 (KCEVE 1001 also has Wired Remote)
EDID SimulationYes
Audio SupportYes
Power SupplyDC 12V/2A
Housing MaterialIron Metal
CompatibilityWindows, Mac OS, Linux, Chrome OS
CertificationsCE, FCC, RoHS, UL
Package Dimensions (KCEVE 801)Approx. 20.5cm (L) x 7.7cm (W) x 3cm (H)
Package Dimensions (KCEVE 1001)Approx. 24cm (L) x 8cm (W) x 3.2cm (H)
Package WeightApprox. 1.7 kg

11. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.