Safety Information
WARNING: Read and understand all instructions provided with this product before installation, operation, maintenance, or repair. Keep this manual in a safe, accessible place.
To avoid injury:
- Never use this device for purposes other than those for which it was designed.
- Never alter or modify this device in any way. Improper operation, maintenance, or alteration can lead to serious injury or death.
- Always perform automotive testing in a safe environment. Do not operate or observe the device while driving, as this can distract the driver and cause a fatal accident.
- Wear ANSI-compliant eye protection.
- Keep clothing, hair, hands, tools, test equipment, etc., away from all moving or hot engine parts.
- Operate the vehicle in a well-ventilated area: exhaust fumes are toxic.
- Place blocks in front of the drive wheels and never leave the vehicle unattended during tests.
- Exercise extreme caution when working near ignition coils, distributor caps, ignition wires, and spark plugs. These components generate dangerous voltages when the engine is running.
- Place the gear in P (for automatic transmission) or N (for manual transmission) and ensure the parking brake is engaged.
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires readily available.
- Do not connect or disconnect the test device while the ignition is on or the engine is running.
- Keep this device dry, clean, free of oil/water or grease. Use a mild detergent on a clean cloth to clean the exterior of the device if necessary.
Compliance Information
FCC ID: XUJOCEX403, IC: 29886-CREV2
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Innovation, Science and Economic Development Canada license-exempt RSSs and Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This digital apparatus complies with Canadian ICES-003. This device may generate, use, and radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) Information
This product meets government requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
The SAR limit is 1.6 W/kg averaged over one gram of tissue. This device has also been tested against this SAR limit. This device was tested for typical body-worn operation at 0 mm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 0 mm separation distance between the user's body and the antenna.
Third-party belt clips, holsters, and similar accessories used by this device should not contain metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This device complies with the essential requirements and other relevant provisions of the Radio Equipment Directive 2014/53/EU. The RF frequencies can be used in Europe without restrictions.
1. Introduction
The LAUNCH X431 Elite 3.0 OBD2 Scanner is a professional diagnostic tool designed to work with all OBD II compliant vehicles, including those with Controller Area Network (CAN). This device is specifically tailored for Mercedes-Benz, Maybach, and Sprinter vehicles, offering comprehensive diagnostic capabilities.
1.1 Vehicle Coverage
This diagnostic device is designed to work with all OBD II compliant vehicles, including passenger cars and light trucks sold in the United States from model year 1996 onwards, as well as American, Asian, and European vehicles. It is specifically designed for:
- Mercedes-Benz Series (1996-2022): A, AMG, AMG GT, B, C, CL, CLA, CLC, CLK, CLS, E, ED, EQC, EQE, EQS, G, GL, GLA, GLB, GLC, GLE, GLK, GLS, M, ML, R, S, SL, SLK, SLR, SLS-CLASS, etc.
- Maybach Series (2000-2024): A, AMG, AMG GT, B, C, CL, CLA, CLC, CLK, CLS, E, ED, EQC, EQE, EQS, G, GL, GLA, GLB, GLC, GLE, GLK, GLS, M, R, S, SL, SLK, SLR, SLS-CLASS, etc.
- Sprinter Series (1996-2025): Citan 415, Sprinter 909, Sprinter I, Sprinter II, Sprinter III, V(447)/Vito/Metris, V-Class(38PIN), VIANO-Class(CAN BUSII), VITO(CAN BUSII), VITO(OBDII), Vaneo, Vito(448), Vito-Class(38PIN), etc.
To verify if a 1994 or 1995 vehicle is OBD II compliant, check the Vehicle Emission Control Information (VECI) label under the hood or on the radiator. The label should state "OBD II Certified."
1.2 On-Board Diagnostics (OBD) II Overview
The OBD II system monitors emission control systems and key engine components through continuous or periodic tests. It provides information on the status of the Malfunction Indicator Lamp (MIL), stored Diagnostic Trouble Codes (DTCs), and readiness monitor status.
1.3 OBD II Definitions
- EOBD: European On-Board Diagnostics, similar to OBD II with the same data link connector and communication protocols.
- Communication Protocols: Enable communication between various systems and sensors. Current protocols include CAN-Bus, J1850 VPW, ISO 9141-2, J1850 PWM, and ISO 14230 KWP.
- PCM (Powertrain Control Module): The vehicle's "on-board computer" that controls engine management, emissions, and powertrain operation.
- DLC (Data Link Connector): The 16-pin connector in the vehicle that allows communication between the computer system and the diagnostic device.
- MIL (Malfunction Indicator Lamp): The "Check Engine" warning light activated when a DTC is stored.
- DTC (Diagnostic Trouble Code): A code stored in the computer system's memory that identifies a fault condition causing MIL activation.
- Freeze Frame Data: Operating conditions stored when a DTC is recorded.
- PID (Parameter Identification Data): Data returned by vehicle control modules to the diagnostic device.
- Monitors: Diagnostic routines programmed into the PCM to perform diagnostic tests and monitor emission-related components.
- Enabling Criteria: Vehicle-specific events or conditions that must occur before monitors are set or run.
- Drive Cycle: A specific vehicle operating mode that provides conditions necessary to set all applicable readiness monitors to a "Ready" state.
1.4 Diagnostic Trouble Codes (DTCs)
OBD II DTCs are 5-digit alphanumeric codes stored by the on-board computer's diagnostic system in response to a detected problem. These codes identify specific problem areas and provide clues to the fault location. The first character (letter) identifies the control system, the second (number 0-3) indicates generic or manufacturer-specific, and the last three (hexadecimal 0-9 or A-F) provide additional fault information.
Example of a Diagnostic Trouble Code (DTC) structure.
Example: P0201 - Injector Circuit Malfunction, Cylinder 1.
1.5 Data Link Connector (DLC) Position
The DLC is typically a 16-pin connector used to connect the diagnostic code reader to the vehicle's on-board computer. In most vehicles, it is located within 12 inches of the center of the dashboard, under or around the driver's side. The position may vary in some vehicles with special designs. Refer to your vehicle's workshop manual if you cannot locate the DLC.
Common locations for the Data Link Connector (DLC) in various vehicle models.
- A - Opel, Volkswagen, Audi
- B - Honda
- C - Volkswagen
- D - Opel, Volkswagen, Citroen
- E - Changan
- F - Hyundai, Daewoo, Kia, Honda, Toyota, Nissan, Mitsubishi, Renault, Opel, BMW, Mercedes-Benz, Mazda, Volkswagen, Audi, GM, Chrysler, Peugeot, Regal, Beijing Jeep, Citroen and other popular models
2. Product Description
The LAUNCH X431 Elite 3.0 OBD2 Scanner main unit.
2.1 Components & Controls
Side view of the scanner showing ports and buttons.
| No. | Name | Description |
|---|---|---|
| 1 | Charging Port | Charges the device via a data cable (not included). |
| 2 | DB-15 Diagnostic Connector | Connects the diagnostic cable. |
| 3 | Power Button | Turns the device on/off. |
| 4 | Touchscreen | Displays test results. |
| 5 | BACK Button | Exits the current program or returns to the previous screen. |
| 6 | HOME Button | Navigates to the main menu screen. |
| 7 | Settings Button | Quick access to the settings module. |
2.2 Technical Specifications
- Display: 4-inch Touch Screen, 1024*600 resolution
- CPU: 4-Core Processor, 1.5GHz
- RAM: 2GB
- ROM: 32GB
- OBD II Input Voltage Range: 9~18V
- Power On: DC 5V data cable (not included) or diagnostic cable via connection to vehicle's DLC
- Operating Temperature: 0 to 45°C (32 to 113°F)
- Storage Temperature: -20 to 70°C (-4 to 158°F)
- Item Weight: 0.7kg
- Item Dimensions (L x W x H): 11inch x 10inch x 51inch (Note: Height of 51 inches seems like a typo, likely 5.1 inches or similar)
- Material: Plastic
- Certification: CE
- Communication Interface: OBD-II
- Software Update: Yes (Lifetime Free Update)
- Wireless Support: No
- Measurement Accuracy: ±1%
- Batteries Included: Yes
- Special Features: Wifi
2.3 Packing List
The following accessories are included in the package:
- Main Unit (Diagnostic Scanner)
- Detachable OBD2 Cable
- Type-C Cable
- User Manual
- Quick Start Guide
Contents of the LAUNCH Creader Elite V3.0 package.
3. Setup and First Use
3.1 Powering On the Device
There are two methods to power on the device:
- Via Data Cable: Insert one end of the data cable (not included) into the device's charging port and the other end into a PC.
- Via Diagnostic Cable: Plug the diagnostic cable into the vehicle's DLC port. The screen will automatically light up when the device is powered on.
Video demonstrating the unboxing and initial power-on process of the LAUNCH X431 Elite 3.0.
3.2 Initial Setup Steps
When using the device for the first time, you need to perform some system settings:
- Press the [POWER] button to turn on the device. A welcome page will appear. Tap "Start" to proceed.
- Select your desired system language and tap "Next Step".
- Select the time zone for your current location. The system will automatically configure the time.
- The system will automatically search for available wireless networks. Select your desired wireless network.
- After the network connection is established, tap "Next Step" to configure workshop information. Enter the required information and tap "Next Step".
- Note: Once configured, the system will attach this information to every report generated.
- Carefully read all terms of the user agreement, activate "I agree to all the above terms and conditions," and tap "OK" to complete the registration process. You will be automatically redirected to the main menu.
- Select the diagnostic software/reset software and download it.
3.3 Software Subscription (Mall Function)
The device comes with pre-installed diagnostic software for Mercedes-Benz, Maybach, and Sprinter with lifetime free updates. To subscribe to additional diagnostic software or reset software for other brands, navigate to the "Mall" function from the main menu.
- The subscribed software can be used and updated for one year free of charge. After this period, it will be deactivated, and you will need to re-subscribe in the Mall to unlock it.
- The software service is considered virtual goods; it becomes effective immediately upon successful transaction and is non-refundable.
For more details, refer to the PDF user manual: Item guides & documents (PDF)
4. Operating Instructions
4.1 Diagnostic Connection
- Turn off the ignition.
- Locate the vehicle's 16-pin Data Link Connector (DLC). (Refer to Section 1.5)
- Plug one end of the diagnostic cable into the vehicle's DLC and the other end into the DB-15 diagnostic connector on the device, then tighten the captive screws.
Connecting the diagnostic cable to the vehicle's DLC.
- Note: Some vehicles may have a plastic DLC cover that needs to be removed. The cable connector is keyed and fits only one way. If you have trouble, rotate the connector 180 degrees and try again.
- Turn on the ignition. The engine can be off or running.
Ensure the ignition key is in the ON position.
4.2 System Diagnosis
This function is designed to diagnose electronic control systems of individual vehicle models.
- The diagnostic software includes all types of reset software that can be directly executed from this module.
- All software is regularly updated. It is recommended to update to the latest version for optimal service and features.
- The use and update of diagnostic software selected for first use are free for life.
- For diagnostic software purchased in the "Mall," use and updates are free for one year. After expiration, renewal is required.
4.2.1 Intelligent Diagnosis (Automatic Recognition)
This function allows quick access to vehicle electronic control systems by decoding the VIN without manual menu selection. After connecting and turning on the ignition, the system automatically enters recognition mode.
- Ensure "Automatic Recognition on Connection" is enabled in Settings.
- A stable network connection is recommended for successful VIN access.
- If the system successfully retrieves VIN information, confirm it to scan vehicle systems.
- If VIN information cannot be accessed, the system will prompt for manual VIN entry or switch to manual diagnosis mode.
4.2.2 Manual Diagnosis
If the device cannot retrieve or analyze VIN information, you can perform a manual diagnosis. Follow the on-screen menu-driven commands.
- Ensure the corresponding vehicle manufacturer's software is installed on the device before diagnosis.
- The diagnostic menu may vary by vehicle make, model, and year.
4.3 OBD II Diagnosis
This function provides a quick way to check DTCs, isolate the cause of the MIL, check monitor status for emissions certification, verify repairs, and perform other emission-related maintenance. After connecting the device to the DLC, tap "OBD II" in the main menu. The device will automatically check the vehicle's computer for communication protocol and display monitor status. Tap "OK" to view the function list:
- Read Codes: Reads and decodes DTCs to identify fault locations.
- Clear Codes: Erases DTCs to turn off the MIL after repairs. Ensure the ignition is ON and the engine is OFF before clearing codes.
- Live Data Stream: Displays real-time data and parameters from the vehicle's ECU. You can view data in text, waveform, or graphic modes. Up to 4 data streams can be combined for comparison.
Displaying 4-in-1 live data streams for comprehensive analysis.
- Freeze Frame: Creates a snapshot of operating conditions when an emission-related fault occurs.
- On-Board Monitoring Test (Mode 6): Retrieves and displays test results for non-continuously monitored emission-related powertrain components and systems.
- O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results.
- EVAP System Test (Mode 8): Initiates a leak test for the vehicle's EVAP system.
- ECU Information: Reads and displays control system module information from the ECU.
- History: Records all diagnostic session details. Provides direct access to previously tested vehicles and allows users to resume from the last operation.
4.4 Special Functions (31+ Reset Services)
The device offers coding, reset, relearn, and other service functions to restore vehicles to operational status after repair or replacement. Available tests vary by vehicle manufacturer, model, and year.
Overview of various reset and service functions available.
Some of the 31+ reset functions include:
- Oil Reset Service
- Electronic Parking Brake Reset
- Steering Angle Calibration
- ABS Bleeding
- Gear Learning
- IMMO Service (Anti-theft key matching)
- Injector Coding
- Battery Maintenance System Reset (Battery Registration and Modification)
- Diesel Particulate Filter (DPF) Regeneration
- Electronic Throttle Position Reset
- Gearbox Matching
- AFS (Adaptive Front-lighting System) Reset
- Sunroof Initialization
- Suspension Calibration
- EGR Adaption
- Seats Calibration
- Tyre Reset
- Coolant Bleed
- AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- NOx Sensor Reset
- AC System Initialization
- High Voltage Battery Detection
- Windows Calibration
- Language Change
- AF Reset
- Transport Mode
- Stop/Start Reset
- Intelligent Cruise Control System Reset
- Engine Power Balance Monitoring
- Gas Particulate Filter (GPF) Regeneration
- Motor Angle Calibration
4.5 Bi-Directional Control (Active Tests)
This powerful feature allows the scanner to send commands to the vehicle's ECU to perform component tests, checking the working status of actuators. This helps quickly pinpoint problem parts without disassembling the vehicle, significantly reducing diagnostic effort.
Illustration of Bi-Directional Control (Active Test) in action.
Common Bi-Directional Control/Active Tests include:
- Operate Mirrors, Turn the Wiper ON/OFF, Turn ON/OFF Cooling Fan, Turn ON/OFF Headlamp, Turn the Fuel Pump ON/OFF
- Turn On/Off the Sound Horn, Lock/Unlock Door, Roll Window Up/Down, Switch the Interior Lights ON/OFF, Open/Close the Sunroof
- Injector Buzz Test, Modulate Throttle, A/C Compressor Activation, Disable/Enable Transport Mode
- Activate Cooling System, Test Device Acceleration, Seat Calibration, All Wheel Drive Calibration, Camera Calibration, Headlight Fitting, Air Suspension Height Calibration, Test Door Lock Actuators, Inlet & Outlet Valve, and many more.
4.6 ECU Coding (Online and Offline)
ECU Coding allows customization of OE-settings and unlocking of vehicle's full potential. This includes:
Diagram illustrating advanced ECU coding capabilities.
- Component Matching: Write adaptive data to match various on-board modules after replacement.
- Retrofit and Modification: Customize OE-settings, such as retrofitting headlamps, changing tire size, retrofitting batteries of different types, customizing dash kits.
- Recode Replacement Parts: Program replacement parts to the car.
- Transmission Quick Relearn: Perform a quick relearn for the transmission.
- Program VIN into Replacement PCM: Program the Vehicle Identification Number into a replacement Powertrain Control Module.
- Personalization: Adapt codes to achieve personalized settings and improve vehicle comfort.
- Disable Annoying Functions: Such as locking seat-belt warning sounds, injector buzz sounds, daytime running light, auto start/stop.
- Unlock Hidden Functions: Such as activating mirror folding function, removing change speed limit, remote window control unlocking, adjusting ambient lighting brightness.
5. Maintenance
5.1 Software Update
The device and its diagnostic software are regularly updated. It is recommended to install the latest software version for the best service and features. The LAUNCH Creader Elite V3.0 offers lifetime free updates for Mercedes-Benz/Maybach/Sprinter software.
- Tap "Upgrade" in the main menu to access the Update Center.
- By default, all diagnostic software is selected. To deselect specific software, tap "Deselect All" and then check the box next to the desired vehicle model.
- Tap "Update" to start the download. The process may take several minutes. Once downloaded, the software packages will be installed automatically.
- Note: Ensure a strong and stable network connection during the update process.
5.2 Subscription Renewal
For diagnostic software purchased in the "Mall," the use and updates are free for one year. After the free period expires, the current version of the software will be locked. To unlock it, you must renew the subscription.
- Tap "Upgrade" in the main menu to access the Update Center.
- If the free period has expired, a message will appear on the screen. Tap "Renew" to open the "Mall."
- Select the desired diagnostic software configuration and follow the on-screen instructions to complete the update.
5.3 Toolbox
The Toolbox module provides several utility functions:
- Delete Diagnostic Software: Remove infrequently used diagnostic software.
- Firmware Fix: Update and repair the diagnostic firmware. Do not interrupt power or switch interfaces during this process.
- DTC Library: Access details of DTCs to simplify the diagnostic process.
- Diagnostic Record: Stores recorded operating parameters or waveform diagrams.
- DLC Position: Helps locate the vehicle's DLC.
- Feedback: Send feedback on diagnostic problems for analysis and troubleshooting.
- Diagnostic Report: Stores all diagnostic reports generated during remote diagnosis.
5.4 Settings
The Settings module allows you to customize various system preferences:
- Units of Measurement: Set the unit of measurement (metric or English).
- Automatic Detection on Connect: Enable/disable automatic VIN recognition when connected to the DLC.
- Brightness: Adjust standby time and screen brightness.
- Sound: Adjust volume and other sound settings.
- Network: Configure Wi-Fi networks.
- Time Zone: Set the device's time zone.
- Language: Select the preferred language. Note: Re-download all diagnostic software after changing language, as the system defaults to English otherwise.
- Workshop Information: Set up the default email address for receiving diagnostic reports and screenshots, and workshop details.
- Recovery: Reset the device to factory default settings. Warning: This can lead to data loss. Proceed with caution.
- Clean Up: Clear cache files and free up storage space. The device will restart automatically after cleaning.
- Screen Capture: Enable/disable the screenshot icon on the screen. Tap the icon to capture the screen.
- About: Displays hardware configuration and license agreement information.
6. Troubleshooting
If you encounter issues with your LAUNCH X431 Elite 3.0 scanner, consider the following:
- Device Not Powering On: Ensure the diagnostic cable is securely connected to both the device and the vehicle's DLC, or that the USB data cable is connected to a power source. Check the vehicle's ignition status.
- No Communication with Vehicle: Verify the DLC connection. Ensure the vehicle is OBD II compliant (check VECI label). Try manual VIN entry if auto-VIN fails.
- Software Not Activated/Accessible: If the launcher is not activated, ensure you have registered on the LAUNCH homepage. For purchased software, verify subscription status and renew if expired.
- Coding Issues (e.g., Mercedes-Benz W212): Some users have reported that coding functions may not apply to all late-model Mercedes-Benz vehicles (e.g., W212, W140). Compatibility can vary. It is recommended to research specific model compatibility or contact LAUNCH support if you encounter persistent issues.
- Screen Size: The device features a 4-inch touchscreen. If you find the screen too small for detailed analysis, consider using the diagnostic report sharing feature to view data on a larger display.
- Bidirectional Control Not Performing: If active tests are not working as expected, ensure the vehicle model and year are fully supported for the specific function. Contact support if issues persist.
- Language Display Issues: If coding menus appear in poor-quality or incorrect language, ensure the device's language settings are correct and re-download the diagnostic software after changing the language.
- Data Loss After Reset: Remember that performing a factory reset will erase all data. Always back up important diagnostic records before initiating a recovery.
7. User Tips
- Immediate Diagnosis: The X431 Elite 3.0 offers fast processing and easy setup, allowing for quick full diagnoses.
- Customization: Use the coding features to personalize vehicle settings, such as changing blinker counts (e.g., from 3 to 5 flashes) or permanently disabling the start-stop system.
- Comprehensive Checks: The unit performs thorough system checks, including air conditioning functions and real-time temperature readings.
- Future-Proofing: Many users purchase this tool to have on hand for future issues, as car problems are inevitable.
- Seller Support: If you have questions or encounter issues, reach out to the seller or LAUNCH support. Users have reported quick and helpful responses.
- Battery Registration: The tool supports battery registration for both same-type/capacity and different-type/capacity battery replacements.
- Offline Coding: The device supports offline ECU coding, useful for replacing second-hand parts.
8. Warranty and Support
8.1 Warranty
This warranty is expressly limited to persons who purchase LAUNCH® products for resale or for use in the ordinary course of the buyer's business.
LAUNCH® electronic products are warranted free from defects in material and workmanship for one year (12 months) from the date of delivery to the user.
This warranty does not cover parts that have been misused, altered, used for a purpose other than intended, or used in a manner inconsistent with the operating instructions. The exclusive remedy for a defective vehicle instrument is repair or replacement, and LAUNCH is not liable for consequential or incidental damages.
The final determination of defects is made by LAUNCH according to established procedures.
8.2 Customer Service
If you have any questions during the operation of the device, please contact your seller or the LAUNCH TECH Service Center.
- Website: https://en.cnlaunch.com
- Phone: +86 755 8455 7891
- E-mail: overseas.service@cnlaunch.com