1. Product Overview
The A-OK AM35 6/28 Smart Blinds Tubular Motor is designed for automated control of rolling shutters and blinds. It offers multiple control options including RF433 remote, Tuya APP (Wi-Fi or Zigbee versions), and voice control via Alexa and Google Home. This motor is suitable for various tube sizes, including 40mm, 45mm, 47mm, and 50mm.
Video: Overview of the A-OK AM35 Tubular Motor and its features.
Main Features
- Option of Tuya APP Wi-Fi control and RF433 remote control.
- Voice control via Alexa and Google Home (requires compatible hub for Zigbee version).
- Electronic limits setting by remote for easy installation.
- Multiple limits preset, including end limits and 4 optional middle limits.
- Limits are retained even when power is off.
- Self-checking and correction of brake offset.
- Stop on block feature for enhanced security.
- Constructed with quality components for reliable performance.
Image: Diagram illustrating the main features and control options of the motor.
2. Safety Information
This product has undergone EU conformity assessment and complies with the following directives:
- Low Voltage Directive 2014/35/EU (LVD)
- Electromagnetic Compatibility Directive 2014/30/EU (EMC)
- Restriction of Hazardous Substances Directive 2011/65/EU (RoHS)
- General Product Safety Regulation (GPSR)
This product meets the requirements of electrical safety, electromagnetic compatibility, and environmental compliance. The EU Declaration of Conformity (DoC) is issued and technical documentation is kept by the EU Authorized Representative for inspection.
Environmental Note
This product complies with EU RoHS. Do not dispose of it as household waste. Please recycle it in accordance with local regulations for waste electrical and electronic equipment.
3. Installation and Setup
3.1 Tube Compatibility and Adapters
The motor is compatible with various tube types and sizes. Ensure you select the correct crown and drive adapter for your specific tube. If you already have rolling tubes, carefully check their size and inner structure against the diagrams provided. Adapters are provided based on your chosen tube type.
Image: Tube compatibility chart for various diameters and shapes.
Adapter Details:
- For 40mm Octagonal Tube: Requires specific crown and drive adapter.
- For 40mm Round Tube: Requires specific crown and drive adapter.
- For 45mm Groove Tube: Requires a drive adapter; no crown needed.
- For 47mm Groove Tube: Requires a drive adapter; no crown needed.
- For 50mm Ground Tube: Requires specific crown and drive adapter.
- For 50mm Groove Tube: Requires specific crown and drive adapter.
Image: Crown and drive adapter for 40mm Octagonal tube.
Image: Dimensions for 40mm Octagonal tube adapter.
Image: Crown and drive adapter for 40mm Round tube.
Image: Drive adapter for 45mm groove tube.
Image: Drive for 47mm Tube.
Image: Crown and drive adapter for 50mm Ground Tube.
Image: Crown and drive adapter for 50mm Groove tube.
3.2 Wiring Diagram
The motor requires a 230V AC power supply. Ensure proper wiring according to the diagram below. The RF433 signal cable is also present.
Image: Motor Cable Wiring Diagram (AC 230V 50/60Hz).
3.3 Tuya Zigbee Hub Requirement
For the Zigbee version (AM35-6/28-MEL-PZ), a Tuya Zigbee Hub (Wireless Gateway) is required to enable APP control and voice control features.
Image: Tuya Zigbee Hub connection diagram for APP and voice control.
4. Operating Instructions
4.1 Programming (by RF Remote)
There are two methods for initial programming:
- Method 1: Press and hold 'Up' button for 3 seconds. Power on the motor. Motor jogs once. Press 'Up' button. Motor jogs once, programming finished.
- Method 2: Press 'Program button' on the motor for 1 second. Motor jogs once. Press 'Up' button. Motor jogs once, programming finished.
Image: Programming methods for the motor.
4.2 Change Direction
Press 'Stop' button of the programmed transmitter for 5 seconds. Motor jogs once. Press 'Down' button. Motor jogs once and the direction is changed.
Image: Steps to change motor direction.
4.3 Limit Position Setting
The motor supports a maximum of six limit positions: the UP limit, DOWN limit, and four middle limits. The first limit position (UP or DOWN) must be set first, and all other limits must be set within these boundaries. Limits can be fine-tuned but not individually deleted (except the first limit position). The motor stops at the next limit position after accepting UP/DOWN order. If no action is taken within 30 seconds, the motor will exit limit position preparation automatically.
First Limit Position Setting:
- Press the PROG button of the programmed transmitter for 1 second. Motor jogs once to enter limit setting preparation.
- Move the motor to the expected position. Press 'Up' to set the UP limit position as first limit, or 'Down' to set the DOWN limit as first limit.
- Press the back PROG button for 1 second to keep the limit position. Motor jogs once and the limit setting is finished.
Image: First limit position setting steps.
Other Limit Position Setting:
- Move the motor to the expected position and then press STOP.
- Press back PROG for 1 second. Motor jogs once to enter limit setting preparation.
- Press back PROG for 1 second to keep the limit position. Motor jogs once and the limit setting is finished.
Limit Position Fine-tuning:
- When the motor runs to the limit position that needs fine-tuning, press back PROG for 1 second to enter setting condition.
- Motor jogs once to enter limit setting preparation.
- Adjust to the expected position and press STOP.
- Press back PROG for 1 second to keep the limit position. Motor jogs once and the limit fine-tuning is finished.
Delete Limit Position:
The first limit position cannot be deleted individually. To delete other limit positions:
- When the motor runs to the limit position that needs to be deleted, press back PROG for 7 seconds.
- Motor jogs once, the preset limit position is deleted.
Image: Other limit position settings, fine-tuning, and deletion.
4.4 Dot Move and Continuous Move Conversion
Press 'Stop' of the programmed transmitter for 5 seconds. Motor jogs once. Press 'Stop' button. Motor jogs once to confirm the conversion.
4.5 Add New Transmitter
Press 'Stop' of the programmed transmitter for 5 seconds. Motor jogs once. Press 'Up' of the new transmitter. Motor jogs once, new programming finished.
4.6 Delete Single Channel Memory
Press 'Stop' of the programmed transmitter for 5 seconds. Motor jogs once. Press back PROG for 1 second. Motor jogs once, single channel deleted.
Image: Advanced operation functions: dot move, adding/deleting transmitters.
4.7 APP Control (Tuya)
- APP Download: Scan the QR code to download the Tuya APP.
- Device Setup:
a. Click 'Add Device' or click the '+' in the upper right corner.
b. Click 'small home appliance' on the left.
c. Click the 'curtain'.
d. Select 2.4GHz Wi-Fi network, enter the device-Binding Wi-Fi password, Click 'Confirm'.
e. Short press motor 'PROG' button 4 times and then long press 3 seconds at the fifth time to enter the distribution network mode. (When press the motor 'PROG' button the fifth time, motor will jog once at the first second, then jog once at the third seconds). Click 'Make sure the indicator lamp is fast flashing'.
f. Waiting for the network configuration to complete. (Motor jog twice during the connection process means that the Wi-Fi configuration is successful but not connected to the router; the motor jog once when it connected to the router and connected to the cloud).
g. After the configuration is complete, you can modify the device name, and click 'Finish'.
Image: Tuya APP download QR code and 'Add Device' screen.
Image: Tuya APP Wi-Fi password entry and device reset.
Image: Tuya APP device adding and success screens.
Image: Tuya APP category selection for device setup.
APP Control Interface:
Image: Tuya APP control interface for the motor.
5. Maintenance
The A-OK AM35 motor is designed for durability and minimal maintenance. To ensure optimal performance and longevity:
- Regularly inspect the motor and associated components for any signs of wear or damage.
- Keep the motor and surrounding area clean and free from dust and debris.
- Ensure all electrical connections are secure.
- The motor is designed to retain its limit settings even after power loss, reducing the need for frequent reprogramming.
- The self-checking and correcting of brake offset feature helps maintain smooth operation.
6. Troubleshooting
Refer to the table below for common issues and their solutions:
Image: Troubleshooting guide for the motor.
| Items | Problem | Matter (Cause) | Shooting (Solution) |
|---|---|---|---|
| 1 | After connecting with the power, the motor doesn't work or works slowly | A. Connected with wrong voltage B. Over loading C. Incorrect installation leads to motor sticking | A. Change to matched voltage B. Choose suitable motor torque C. Check the components |
| 2 | The motor stops suddenly during working | A. The motor has been exceeded overheating protection B. Power was cut off | A. After the motor with natural cooling, it will come back to work again B. The motor will come back to work once power on |
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | AM35-6/28-MEL-PZ (Tuya Zigbee version), AM35-6/28-MEL-PW (Tuya Wi-Fi version) |
| Brand Name | BULIAN |
| Voltage | 230V AC |
| Wattage | 115W |
| Rolling Speed | 28 rounds per minute |
| Certification | CE, RoHS |
| Length | 505 mm |
| Diameter | 39.4 mm (motor body) |
| Package Weight | 1.8 kg |
| Package Dimensions | 53 cm (L) x 6 cm (W) x 4 cm (H) |
| EU LVD Voltage | High voltage: Above 50Vac or 75Vdc |
| Battery Included | No |
Image: Motor dimensions and component details.
Image: Motor specifications label.
8. User Tips
- When installing, ensure the motor is securely fitted into the tube to prevent any movement during operation.
- For optimal smart home integration, ensure your Tuya Zigbee Hub (if using the Zigbee version) is within range and properly connected to your Wi-Fi network.
- Test all limit settings thoroughly after initial programming to prevent over-extension or retraction of your blinds.
- If using voice control, ensure your smart assistant (Alexa/Google Home) is linked to your Tuya Smart Life account.
9. Manufacturer and Support
Manufacturer
Name: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China
Tel: 86-18589043609
EU Authorized Representative
Name: Sophie Bennett
Address: 9 rue du Bat d'Argent, 69001 Lyon, France
Tel: 33-774555006
For further assistance or technical support, please contact the manufacturer or your local distributor.
