1. Introduction
The Veinasa XS-WDS01 is a high-precision wind direction sensor designed for outdoor environmental monitoring. It accurately measures the direction value of the wind and converts this physical signal into an electrical signal, which can be directly transmitted to a recording device for processing. Its robust construction ensures reliable performance in various environmental conditions.

2. Product Features
- 360° Wind Direction Measurement: Capable of measuring wind direction across a full 360-degree range.
- High Accuracy: Designed for precise and accurate wind direction readings.
- Durable Construction: Sensor shell made of polycarbonate composite material, offering excellent anti-corrosion, anti-erosion, anti-aging, acid and alkali resistance, and rust-free properties.
- Reliable Performance: Internal circuitry is protected, ensuring good adaptability to harsh outdoor environments.
- Imported Bearings: Features high-performance imported bearings for low rotational resistance and accurate measurement.
- Easy Installation: Designed with flanged mounting for simple and suitable installation in various working conditions.
- Multiple Output Signals: Supports Voltage (0~2V, 0~5V, 0~10V), 4~20mA, RS485 (Modbus-RTU), and SDI-12 output options.

3. Technical Specifications
| Parameter | Value |
|---|---|
| Model Number | XS-WDS01 |
| Measuring Range | 0~360° |
| Start Wind Speed | ≤0.3 m/s |
| Accuracy | 0.1° |
| Resolution | 0.1 m/s |
| Output Signal Options |
|
| Supply Voltage |
|
| Working Environment Temperature | 0~50°C |
| Working Environment Humidity | <95%RH |
| Heating Power | 160mA@12V; 310mA@24V |
| Degree of Protection | IP65 |
| Housing Material | Polycarbonate Composite |
| Bearings | Imported High-Performance |

4. Setup and Installation
The XS-WDS01 wind direction sensor is designed for straightforward installation. Follow these general guidelines:
- Mounting Location: Choose an outdoor location free from obstructions (buildings, trees) that could interfere with accurate wind direction readings. The sensor should be mounted securely on a stable pole or mast.
- Physical Installation: The sensor features flanged mounting. Use appropriate fasteners to secure the base of the sensor to your chosen mounting structure. Ensure the sensor is level and oriented correctly for accurate readings (e.g., the arrow pointing North if calibration is required for absolute direction).
- Wiring: The sensor comes with a cable for electrical connection. The specific wiring configuration depends on the chosen output signal (Voltage, Current, RS485, SDI-12) and your data acquisition system. Refer to the pinout diagram (if available in your specific product package) or consult the manufacturer's detailed wiring instructions for your chosen output type.
- Power Supply: Connect the sensor to a stable DC power supply within the specified voltage range (5-24V DC or 12-24V DC, depending on the output signal).
- Data Connection: Connect the output signal wires to your data logger, PLC, or other recording device. Ensure proper signal matching and termination as per your system's requirements.


5. Operating Instructions
Once properly installed and powered, the XS-WDS01 sensor will continuously measure wind direction. The output signal will correspond to the current wind direction value.
- Power On: Ensure the sensor is connected to the correct power supply.
- Data Acquisition: Your connected data acquisition system (data logger, PLC, etc.) should be configured to read the specific output signal type from the sensor.
- Interpretation of Data:
- For Voltage/Current outputs, the signal will vary proportionally with the wind direction (0-360°). Consult your system's calibration for conversion to degrees.
- For RS485 (Modbus-RTU) and SDI-12, the data will be transmitted digitally. Your system will need to implement the respective communication protocols to read the wind direction values. The default Modbus-RTU address is 01.
- Monitoring: Regularly monitor the data output to ensure the sensor is functioning correctly and providing accurate readings.
6. Maintenance
To ensure the longevity and accuracy of your XS-WDS01 wind direction sensor, periodic maintenance is recommended:
- Regular Cleaning: Periodically clean the exterior of the sensor, especially the wind vane, to remove dust, dirt, ice, or other debris that could impede its movement or affect readings. Use a soft cloth and mild detergent if necessary.
- Check for Obstructions: Ensure no new obstructions have grown or been placed near the sensor that could block wind flow.
- Inspect Wiring: Check all electrical connections and cables for signs of wear, corrosion, or damage. Secure any loose connections.
- Verify Mounting: Confirm that the sensor remains securely mounted and level. Tighten any loose fasteners.
- Environmental Considerations: While the sensor is IP65 rated for protection against dust and water jets, extreme weather conditions (e.g., severe icing, heavy storms) may temporarily affect performance. Ensure proper drainage around the mounting area.
7. Troubleshooting
If you encounter issues with your XS-WDS01 wind direction sensor, consider the following troubleshooting steps:
- No Output/Incorrect Readings:
- Check power supply: Ensure the sensor is receiving the correct voltage (5-24V DC or 12-24V DC) and that connections are secure.
- Inspect wiring: Verify all signal and power wires are correctly connected and free from damage.
- Check data acquisition system: Ensure your data logger or receiving device is correctly configured for the sensor's output type and is actively reading data.
- Physical obstruction: Check if the wind vane is physically obstructed or stuck. Gently clear any debris.
- Sensor orientation: Confirm the sensor is mounted correctly and not rotating freely on its mount.
- Intermittent Readings:
- Loose connections: Re-check all wiring connections for tightness.
- Cable damage: Inspect the cable for any cuts or damage that could cause intermittent signals.
- Environmental factors: Extreme weather (e.g., strong gusts, heavy rain/snow) might temporarily affect readings.
- Inaccurate Readings:
- Obstructions: Ensure there are no nearby objects interfering with wind flow.
- Calibration: If using analog output, verify the calibration settings in your data acquisition system match the sensor's specifications.
- Sensor damage: If physical damage is visible, the sensor may need replacement.
If problems persist after attempting these steps, please contact customer support for further assistance.
8. User Tips
- For optimal performance, mount the sensor at a height that minimizes ground-level turbulence and ensures clear exposure to prevailing winds.
- When selecting the output signal, consider the distance to your data acquisition system. RS485 is generally preferred for longer distances due to its robustness against noise.
- Regularly back up any collected data from your monitoring system.
9. Warranty and Support
For warranty information, technical support, or service inquiries regarding your Veinasa XS-WDS01 wind direction sensor, please contact the seller or manufacturer directly. Ensure you have your product model number (XS-WDS01) and purchase details available when seeking support.