1. Introduction
The JIKONG JK-B2A24S20PHCR is an intelligent active balanced Battery Management System (BMS) designed for 8S-24S series batteries, compatible with Li-ion, LiFePo4, and LTO battery types. This BMS features 2A active balancing, HEAT, CAN, and RS485 communication capabilities, and supports a continuous charge/discharge current of 200A.
Active balancing (non-lossy balancing) is a key feature of this BMS. It efficiently transfers energy from cells with higher energy to those with lower energy, ensuring voltage balance with minimal energy loss. This process operates continuously during charging, discharging, or idle states until the voltage difference is within a set range. Unlike passive balancing, active balancing uses larger currents (typically 1-2A) without generating excessive heat, making it ideal for larger capacity battery packs where longer balancing times and higher currents are beneficial.
2. Package Contents
Please verify that all items are present and in good condition upon opening the package:
- BMS Unit x 1
- Sampling Cable x 2
- NTC Cable x 1
- Switch Key x 1
3. Setup and Installation
3.1. BMS Interfaces
The BMS is equipped with various interfaces to meet diverse operational needs, including communication and sensor connections:
- CAN/RS485: For communication with external devices and inverters.
- BT (Bluetooth): For wireless connection to mobile APP.
- NTC: Temperature sensor input.
- Soft Switch: For power control.
- SOC Indicator: State of Charge indicator.
- Key Switch: External switch input.
- Active Equalizer: For cell balancing.
- GPS: GPS module connection port.
- Display/Switch: For external display or switch.
- Hot: Heating element connection.
3.2. Wiring Instructions
Follow these steps for proper wiring of the BMS to your battery pack:
- Connect all individual cell sampling cables to the battery cells, ensuring correct polarity and sequence.
- Insert the main sampling cable connector into the BMS.
- Connect the B- (main negative) line and the P- (load/charge negative) line to the battery pack.
Important: Always ensure all connections are secure and correctly polarized before powering on the system.
3.2.1. Wiring for 24-String Cells
3.2.2. Wiring for 16-String Cells
4. Operating Instructions
4.1. Monitoring and Control
The JIKONG BMS offers flexible monitoring and control options through a mobile application, PC software, or a dedicated home storage display unit.
4.1.1. Mobile APP (JIKONG SMART BMS)
The mobile Bluetooth APP, "JIKONG SMART BMS," acts as a personal lithium battery steward, providing clear and comprehensive information at a glance. The app supports iOS, Android, and HarmonyOS systems and can automatically switch languages based on your mobile phone's system settings.
Through the app, you can view multiple critical parameters such as voltage, current, temperature, State of Charge (SOC), alarms, and cycle counts.
4.1.2. Parameter Adjustment
The BMS allows for free adjustment of various protection values, including overcharge, overdischarge, overcurrent, temperature, and balance settings. Before making any adjustments, it is crucial to read and understand the internal parameters of the protection board. Refer to the app or PC software manual for detailed instructions on parameter modification.
4.2. Inverter Communication Protocol
The JIKONG BMS supports protocol docking with mainstream inverter communication protocols available in the market. This allows for seamless integration with various energy systems.
The inverter communication protocol can also be configured via the host computer software.
5. Maintenance
5.1. Physical Protection
The JIKONG BMS is designed with a fully enclosed aluminum alloy shell, providing effective dustproof and waterproof capabilities. This robust construction helps reduce damage from external environmental factors to the electronic components. Additionally, internal high-strength insulating material filling completely wraps the components, greatly absorbing vibration and external pressure during use.
5.2. Cell Balancing
The intelligent active balancing technology ensures a longer lifespan and more stable performance for your battery pack. The BMS continuously works to equalize cell voltages, which is crucial for the overall health and longevity of the battery.
6. Troubleshooting
If you encounter any issues with your JIKONG BMS, please consider the following general troubleshooting steps:
- Check all connections: Ensure all sampling cables, B- and P- lines, and communication cables are securely connected and correctly polarized.
- Review APP/Software data: Use the mobile app or PC software to check for any error codes, abnormal voltage/current readings, or temperature alerts.
- Verify parameters: Confirm that all protection parameters (overcharge, overdischarge, overcurrent, temperature) are set correctly for your battery type and application.
- Restart the BMS: Disconnect and reconnect the battery to the BMS (if safe to do so) to perform a soft reset.
- Consult the manual: Re-read relevant sections of this manual, especially wiring and operating instructions.
For persistent issues or complex problems, please contact JIKONG customer support for assistance.
7. Specifications
7.1. General Specifications
- Brand Name: JIKONG
- Model: JK-B2A24S20PHCR
- Type: LIFEPO4 Battery BMS
- Handware or Smart: SMART BMS
- Battery Series: 8S-24S
- Applications: Lifepo4, Li-Ion, Lto
- Balance Function: Active Balanced BMS
- Active Balanced Current: 2A
- Charge and Discharge Port: Common Port BMS
- Continuous Charge Current: 200A
- Continuous Discharge Current: 200A
- Charging Current: 200A
- Function: Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
- Usage Scenario: Power BMS, Energy Storage BMS, 3C Digital BMS
- Certification: CE, WEEE
- High-concerned chemical: None
- Origin: Mainland China
7.2. Detailed Product Specifications
7.3. Dimensions
8. User Tips
- Always double-check wiring connections, especially cell tap order, before applying power to prevent damage to the BMS or battery.
- Utilize the mobile app for real-time monitoring and fine-tuning of parameters to optimize battery performance and longevity.
- Ensure the BMS is installed in a location that allows for adequate heat dissipation, despite its efficient design.
- Regularly check for firmware updates for the BMS and its accompanying software/app to benefit from new features and improvements.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact JIKONG Factory Store directly through their official channels. Keep your purchase records handy when contacting support.