keeppley Pokemon Building Block Action Figures (K20247-K20260 Series)

Contents

Keeppley Pokemon Building Block Action Figures Instruction Manual

Models: K20247-K20260 Series

1. Product Overview

The Keeppley Pokemon Building Block Action Figures are a collection of articulated figures featuring popular Pokemon characters. Each figure is designed with movable joints and comes with detachable effect parts and a rotating display base, allowing for dynamic posing and recreation of battle scenes. These figures are compatible with small building blocks (similar to Lego).

Collection of Keeppley Pokemon figures
A collection of various Keeppley Pokemon figures.
Keeppley Pokemon figures with accessories
Various Keeppley Pokemon figures showcasing their articulation and effect parts.

2. Setup and Assembly

Each Keeppley Pokemon figure comes with its main body, specific effect parts, a rotating display base, and a character card. Follow these general steps for assembly:

  1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed on the character card are present.
  2. Assemble Figure (if necessary): While most figures come largely pre-assembled, some may require minor attachment of limbs or head. Gently snap parts into place, ensuring proper alignment.
  3. Attach Effect Parts: Locate the designated attachment points on your figure for its unique effect parts (e.g., flame for Charizard, water for Blastoise, energy spheres for Mewtwo). These parts are designed to be detachable.
  4. Assemble Display Base: The rotating display base usually consists of a few interlocking pieces. Assemble them according to the visual guide.
  5. Mount Figure on Base: Place the figure onto the rotating display base. Ensure it is stable and securely attached.

Specific Assembly Notes:

  • Charizard: Head, wings, limbs, and tail are movable. Flame effect is detachable.
  • Gardevoir: Head and hands are movable. Moonblast effect attaches to hand.
  • Gengar: Limbs are movable. Features a replaceable tongue for varied expressions. Shadow Ball effect attaches to the figure.
  • Dragonite: Head, wings, and limbs are movable. Dragon Claw effect attaches to hands.
  • Eevee: Limbs, head, and tail are movable. Swift effect parts attach around the figure.
  • Blastoise: Head and limbs are movable. Cannon barrels are rotatable. Water effects are detachable.
  • Mewtwo: Head and limbs are movable. Tail is segmented and rotatable. Shadow Ball effect attaches to the figure.
  • Venusaur: Limbs are movable. Leaves on its back can sway. Vine whips are poseable.
  • Garchomp: Features double-jointed and movable limbs. Sandstorm effect attaches to the base.
Charizard figure assembly and articulation details
Charizard figure showing movable head, wings, limbs, and tail, along with detachable flame effect.
Blastoise figure assembly and articulation details
Blastoise figure demonstrating movable head, limbs, rotatable cannon barrels, and detachable water effects.
Gengar figure assembly and articulation details
Gengar figure with movable limbs and a replaceable tongue for different expressions.

3. Operating and Posing

These action figures are designed for display and light play. Utilize the articulated joints and detachable effect parts to create various poses and recreate iconic Pokemon battle scenes.

  • Posing: Gently move the articulated joints (head, limbs, tail, wings, etc.) to position your figure as desired. Avoid excessive force to prevent damage.
  • Effect Parts: Attach or detach the special effect parts to enhance your figure's pose and display.
  • Display Base: Use the rotating display base to showcase your figure from all angles.
Charizard and Eevee figures in a battle pose
Charizard and Eevee figures posed to recreate a battle scene.
Gardevoir and Dragonite figures in a battle pose
Gardevoir and Dragonite figures posed to recreate a battle scene.

4. Maintenance

  • Cleaning: To clean the figures, gently wipe them with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store figures away from direct sunlight and extreme temperatures to prevent discoloration or warping. Keep them in a dust-free environment.
  • Handling: Handle figures by their main body parts rather than delicate accessories or articulated joints to minimize stress on the connections.

5. Troubleshooting

  • Parts Not Fitting: If a part does not fit easily, do not force it. Check the instruction images to ensure correct orientation and that you have the right parts for the specific figure. Small building block connections may require a gentle but firm push.
  • Loose Joints: Over time, joints may become slightly loose. This is normal with articulated figures. If a joint is too loose to hold a pose, a small amount of clear nail polish or a specialized joint-tightening fluid can be applied to the joint and allowed to dry, creating more friction.
  • Figure Not Standing: Ensure the figure is properly seated on its display base. Adjust the pose to balance the figure's weight.

6. Specifications

Attribute Detail
Brand Name keeppley
Model Number POKEMON (K20247-K20260 Series)
Material Plastic (ABS)
Block Size Small building block (Compatible with Lego)
Plastic Block Shape Irregular Shape
Gender Unisex
Recommended Age 14+ years
Origin Mainland China
Warning NO (No specific hazard warning beyond general toy safety)
Is Electric No Battery
Certification CE
High-concerned chemical None

Approximate Dimensions (Height):

  • Charizard: 8 cm (Ratio 1:20)
  • Eevee: 5.4 cm
  • Gardevoir: 8 cm (Ratio 1:20)
  • Gengar: 7.5 cm (Ratio 1:20)
  • Dragonite: 8 cm
  • Blastoise: 12.4 cm (W 23.5cm, D 17.8cm with cannon effect)
  • Squirtle: 5 cm (W 4.2cm, D 4.7cm)
  • Mewtwo: 15.8 cm (W 9.4cm, D 10.2cm)
  • Mew: 6.8 cm (W 3.1cm, D 3.7cm)
  • Venusaur: 10 cm (W 15.1cm, D 15.1cm)
  • Bulbasaur: 5.4 cm (W 4.2cm, D 6.3cm)

Note: All product dimensions are measured manually and may have slight errors. Please refer to the actual product.

Dragonite figure dimensions
Dragonite figure with approximate height of 8cm.
Mewtwo and Mew figure dimensions
Mewtwo (15.8cm) and Mew (6.8cm) figures with detailed dimensions.

7. Warranty and Support

For specific warranty information and customer support, please refer to the seller or retailer from whom you purchased this product. Keep your proof of purchase for any warranty claims.

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

8. User Tips

  • Collect Them All: The Keeppley Pokemon series features a wide range of characters. Collecting multiple figures allows for more diverse display options and battle scene recreations.
  • Creative Posing: Experiment with the flexible articulation and various effect parts to create unique and dynamic poses for your figures. The rotating base enhances display possibilities.
  • Display Safely: When displaying figures, ensure they are on a stable surface to prevent accidental falls and potential damage.
  • Gentle Handling: Although made from durable ABS plastic, delicate parts and joints should be handled with care to ensure longevity.
Four sets of Keeppley Pokemon figures
The full collection of 4 sets, encouraging users to collect them all.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.