1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your JINGSHA B450M-K AMD AM4 motherboard. Designed for DIY gaming and general-purpose computing, this Micro-ATX motherboard supports AMD Ryzen processors and offers a range of features for a stable and efficient system build. Please read this manual thoroughly before proceeding with installation to ensure proper setup and optimal performance.
2. Key Features
- Robust Design: 8-Layer PCB for enhanced stability and durability.
- Processor Support: Compatible with AMD Ryzen R3, R5, R7 2000/3000/4000/5000 Series processors with AM4 socket.
- Memory: Two UDIMM DDR4 slots supporting dual channel memory up to 64GB at speeds of 2133/2400/2666/3200MHz (CPU dependent).
- Storage Options: Four SATA3.0 ports and one M.2 2280 NVMe x4 3.0 port for high-speed storage.
- Wireless Expansion: Dedicated M.2 PCIE WIFI + Bluetooth port for wireless modules.
- Connectivity: Integrated Gigabit Ethernet (RTL8111H) for reliable network access.
- Display Outputs: Features HD (HDMI) supporting up to 3840x2160@60Hz and VGA supporting up to 1920x1080@60Hz.
- USB Ports: A total of 8 USB2.0 ports and 4 USB3.0 ports for peripheral connectivity.
- Audio: Realtek ALC897 HD Audio for 5.1 channel sound.
- Cooling: Includes a 4-pin CPU Smart FAN header for efficient cooling control.
- Premium Components: Utilizes all solid-state capacitors and an aluminum heatsink for enhanced stability and longevity.


3. Specifications
| Component | Specification |
|---|---|
| Part# | B450M-K Motherboard |
| Processor Socket | AM4 |
| Supported Processors | AMD Ryzen R3/R5/R7 2000/3000/4000/5000 Series |
| Chipset | AMD B450 |
| Display Outputs | 1x HD (HDMI, 3840x2160@60Hz), 1x VGA (1920x1080@60Hz) |
| Memory Slots | 2x UDIMM DDR4 (Dual Channel) |
| Max Memory Capacity | Up to 64GB |
| Memory Frequencies | 2133/2400/2666/3200MHz (Base on CPU) |
| Storage Ports | 4x SATA3.0, 1x M.2 2280 NVMe x4 3.0 Port |
| Wireless Storage | 1x M.2 PCIE WIFI+BT port |
| USB Ports (Rear) | 2x USB3.0, 2x USB2.0 |
| USB Ports (Onboard Headers) | 1x USB3.0 header (supports 2 USB3.0 ports), 2x USB2.0 headers (supports 4 USB2.0 ports) |
| LAN | 1x RTL8111H Gigabit Ethernet (1000Mbps) |
| Audio | Realtek ALC897 HD Audio (5.1 Channel) |
| BIOS | AMI EFI BIOS |
| Back Panel Connectors | 1x HD, 1x VGA, 2x USB3.0, 2x USB2.0, 1x RJ45 LAN, 1x PS/2 Keyboard/Mouse+, 1x Audio 3-in-1 |
| Expansion Slots | 1x PCIE3.0 x16, 1x PCIE2.0 x1 |
| Form Factor | Micro-ATX (218mm x 170mm) |
| PSU Solution | ATX 8Pin + ATX 24Pin |
| Included Accessories | 1x I/O Shield, 1x SATA cable |

4. Component Overview
Familiarize yourself with the layout of the motherboard and its various connectors before installation.


4.1. Front Panel Headers
- F_AUDIO: Front panel audio connector.
- F_USB3.0 Header: Connects to front panel USB 3.0 ports (supports two USB 3.0 ports).
- F_USB2.0 Headers: Connects to front panel USB 2.0 ports (two headers, supports four USB 2.0 ports).
- F_PANEL (Front Control Panel Header): Connects to power switch, reset switch, power LED, and HDD LED. Refer to the diagram (Figure 4.1) for pin assignments (POWER LED, POWER SW, HDD LED, RESET SW).
- SPEAKER: System speaker header.
- CMOS Header: For clearing CMOS settings.
- DEBUG Header: For diagnostic purposes.
4.2. Power Connectors
- 24pin ATX Connector: Main power connector from the power supply.
- 8pin 12V Connector: CPU power connector from the power supply.
4.3. Fan Headers
- 4pin CPU Smart FAN header: For the CPU cooler fan.
- SYS FAN header: For a system case fan.
5. Setup Instructions
Before starting, ensure your workspace is clean, well-lit, and static-free. It is recommended to wear an anti-static wrist strap or frequently touch a grounded metal object to discharge static electricity.
5.1. CPU Installation
- Locate the AM4 CPU socket on the motherboard.
- Lift the small metal lever on the side of the socket.
- Carefully align the triangular mark on your AMD AM4 CPU with the corresponding mark on the socket.
- Gently place the CPU into the socket without forcing it. It should drop in easily.
- Lower the metal lever to secure the CPU in place.
5.2. CPU Cooler Installation
- Apply a thin, even layer of thermal paste to the top of the CPU (if not pre-applied on the cooler).
- Mount your AM4 compatible CPU cooler according to its manufacturer's instructions.
- Connect the CPU cooler fan cable to the "4pin CPU Smart FAN header" on the motherboard.
5.3. RAM (Memory) Installation
- Locate the two DDR4 memory slots.
- Open the clips at both ends of the memory slot.
- Align the notch on the DDR4 memory module with the key in the memory slot.
- Press down firmly on both ends of the memory module until the clips snap into place.
- For dual-channel performance, install memory modules in both slots.
5.4. Storage Device Installation
5.4.1. NVMe M.2 SSD Installation
- Locate the M.2 NVMe slot on the motherboard.
- Remove the M.2 standoff screw.
- Insert the M.2 SSD into the slot at an angle.
- Gently push the SSD down and secure it with the standoff screw.
5.4.2. SATA Drive Installation
- Connect one end of a SATA data cable to a SATA3.0 port on the motherboard.
- Connect the other end of the SATA data cable to your HDD or SATA SSD.
- Connect a SATA power cable from your power supply to the drive.
5.5. Expansion Card Installation (PCIe)
- Locate the PCIE3.0 x16 slot (for graphics cards) or PCIE2.0 x1 slot.
- Remove the corresponding expansion slot cover from your PC case.
- Align your expansion card with the slot and press down firmly until it is seated correctly.
- Secure the card to the case with a screw.
5.6. Power Supply Connections
- Connect the 24-pin ATX power cable from your power supply to the 24pin ATX connector on the motherboard.
- Connect the 8-pin 12V CPU power cable from your power supply to the 8pin 12V connector near the CPU socket.
5.7. Front Panel and Case Fan Connections
- Connect the front panel cables (Power SW, Reset SW, Power LED, HDD LED) to the F_PANEL header according to the pinout diagram (Figure 4.1).
- Connect front panel USB 3.0 cables to the F_USB3.0 header.
- Connect front panel USB 2.0 cables to the F_USB2.0 headers.
- Connect front panel audio cables to the F_AUDIO header.
- Connect any additional case fans to the SYS FAN header.
5.8. I/O Shield Installation
Before installing the motherboard into the case, ensure the I/O shield (included accessory) is properly snapped into the rear opening of your PC case.
6. Operating Instructions
6.1. Initial Power On and BIOS Setup
- After assembling all components, connect your monitor, keyboard, and mouse.
- Connect the power cable to your power supply and turn on the PSU switch.
- Press the power button on your PC case.
- During startup, repeatedly press the DEL key (or F2 depending on BIOS version) to enter the AMI EFI BIOS setup utility.
- In the BIOS, verify that all components (CPU, RAM, storage) are detected correctly.
- Configure boot order, enable XMP for RAM (if applicable), and set other desired system parameters.
- Save changes and exit BIOS. The system will restart.
6.2. Operating System and Driver Installation
- Insert your operating system installation media (USB drive or DVD).
- Follow the on-screen prompts to install your preferred operating system.
- Once the OS is installed, install the necessary drivers for the motherboard chipset, LAN, audio, and any discrete graphics cards. These are typically found on the manufacturer's website.
7. Maintenance
- Dust Cleaning: Regularly clean dust from inside your PC case, especially from fans and heatsinks, using compressed air. Ensure the system is powered off and unplugged before cleaning.
- BIOS Updates: Check the JINGSHA official website periodically for BIOS updates. BIOS updates can improve system stability, compatibility, and performance. Follow the update instructions carefully to avoid system damage.
- Driver Updates: Keep your motherboard drivers (chipset, LAN, audio) and graphics card drivers updated to ensure optimal performance and compatibility.
- Cable Management: Ensure cables are neatly routed to improve airflow and prevent interference.
8. Troubleshooting
8.1. No Power / No POST (Power-On Self-Test)
- Check all power connections (24-pin ATX, 8-pin CPU, GPU power).
- Ensure the power supply is switched on and functioning.
- Verify that the front panel power switch is correctly connected to the motherboard.
- Try reseating RAM modules, CPU, and graphics card.
- Clear CMOS by removing the CMOS battery for 30 seconds or using the CMOS header (refer to Figure 4.1).
8.2. No Display Output
- Ensure your monitor is connected to the correct display output (either the motherboard's integrated graphics ports or your discrete graphics card).
- Verify that the graphics card is properly seated in its PCIe slot and has adequate power.
- Test with a different monitor or display cable if possible.
8.3. System Instability / Crashes
- Check CPU and GPU temperatures to ensure they are not overheating.
- Verify RAM stability using memory diagnostic tools.
- Ensure all drivers are up to date.
- Check for loose connections or improperly seated components.
8.4. Peripheral Not Detected
- Try connecting the peripheral to a different USB port.
- Ensure the peripheral has its own power supply if required.
- Install or update drivers for the peripheral.
9. User Tips
- Component Compatibility: Always double-check the compatibility of your CPU, RAM, and other components with the B450M-K motherboard before purchase and installation. Refer to the specifications section.
- Static Discharge: Take precautions against static electricity when handling the motherboard and other components. Use an anti-static wrist strap or frequently touch a grounded metal object.
- BIOS Settings: For optimal performance, ensure XMP (Extreme Memory Profile) is enabled in the BIOS for your DDR4 RAM if it supports higher speeds.
- Cable Management: Good cable management not only makes your build look cleaner but also improves airflow within the case, contributing to better cooling and system stability.
10. Warranty and Support
The JINGSHA B450M-K motherboard typically comes with a 3-year warranty. For warranty claims, technical support, or further assistance, please contact your retailer or the official JINGSHA support channels. Keep your proof of purchase for warranty validation.
For the latest drivers and BIOS updates, please visit the official JINGSHA website.