YADEA G10 Electric Scooter User Manual

1. Important Safety Information

Please read this manual carefully before operating your YADEA G10 Electric Scooter. Failure to follow the instructions and safety warnings could result in serious injury or damage to the scooter.

• Always wear appropriate protective equipment, including a helmet, knee pads, and elbow pads, when riding.
• Comply with all local laws and regulations regarding electric scooter usage, including speed limits and road-legal requirements.
• Exercise caution when riding in wet conditions, on uneven surfaces, or in low visibility.
• Do not operate the scooter under the influence of alcohol or drugs.
• Strictly follow the instruction manual for charging and storage to prevent potential fire risks.
• The maximum load capacity for this scooter is 120 kg (264 lbs). Do not exceed this limit.

Figure 1: YADEA G10 Electric Scooter Overview

2. Setup and Assembly

Your YADEA G10 Electric Scooter comes partially assembled. Follow these steps for initial setup:

1. Unfolding the Scooter: Carefully unfold the main stem until it locks into place. Ensure all locking mechanisms are securely engaged.
2. Handlebar Installation: Attach the handlebars to the stem, ensuring they are firmly secured.
3. Initial Charge: Before your first ride, fully charge the scooter's battery. Refer to the 'Charging the Battery' section for detailed instructions.
4. Pre-Ride Check: Before each ride, check the tire pressure, brake functionality, and ensure all bolts and quick releases are tight.

Figure 2: Scooter Dimensions and Key Parameters

3. Operating Instructions

3.1 Powering On/Off

Press and hold the power button on the LED display to turn the scooter on or off.

3.2 Smart LED Display

The integrated Smart LED Display provides real-time information about your ride:

• Speed Display: Shows current speed in km/h.
• Battery Display: Indicates remaining battery level.
• Turn Signal Indicator: Activates when turn signals are used.
• Speed Mode Switch: Allows you to toggle between different speed modes.

Figure 3: Smart LED Display Interface

3.3 Speed Modes

The YADEA G10 offers multiple speed modes to suit different riding conditions:

• ECO Mode: Optimized for maximum range (approx. 50km).
• Sport Mode: Balanced performance and range (approx. 40km).
• Race Mode: Maximum performance and acceleration (approx. 35km range), with a top speed of 25km/h.

You can switch between these modes using the speed mode switch on the LED display.

3.4 Braking System

The scooter is equipped with a reliable dual braking system for timely stopping:

• Front Brake: Disc brake.
• Rear Brake: Disc brake combined with an electric brake.

Always apply brakes smoothly and gradually to maintain control.

Figure 4: Dual Braking and Shock Absorber System

3.5 Lighting and Reflectors

For enhanced visibility and safety, the scooter features:

• Headlight: Front-mounted for illuminating your path.
• Taillight: Rear-mounted, activates during braking.
• Turn Signals: Integrated for indicating turns.
• Front and Rear Reflectors: Additional passive safety features.

Figure 5: Headlight, Taillight, and Reflectors

3.6 Folding Mechanism

The YADEA G10 is foldable for easy storage and transport. To fold, locate the folding latch on the stem and follow the instructions to collapse the scooter. Ensure it is securely latched in the folded position.

Figure 6: Scooter in Folded Position

4. Maintenance

4.1 Charging the Battery

Connect the charger to the scooter's charging port and then to a power outlet. The charging time is approximately 8-9 hours for a full charge. Do not overcharge the battery. Store the scooter and charger in a cool, dry place.

4.2 Tire Maintenance

The scooter is equipped with 10-inch off-road tubeless tires. Regularly check tire pressure and inspect for any signs of wear or damage. Maintain proper tire pressure for optimal performance and safety.

4.3 Cleaning and Storage

Clean the scooter with a damp cloth. Do not use high-pressure water jets or immerse the scooter in water, as it has an IPX4 waterproof rating, meaning it is resistant to splashing water from any direction. Store the scooter in a dry, sheltered location away from direct sunlight and extreme temperatures.

5. Troubleshooting

If you encounter issues with your YADEA G10 Electric Scooter, please refer to the following general troubleshooting tips:

• Scooter not turning on: Ensure the battery is charged. Check all connections.
• Loss of power during ride: The battery may be low. Charge the scooter fully.
• Brakes not responding: Inspect brake cables and pads for wear or damage. Adjust as necessary or seek professional assistance.
• Unusual noises: Stop riding immediately and inspect the scooter for loose parts or damage.

For persistent issues, please contact customer support.

6. Specifications

Figure 7: Comprehensive Product Specifications

7. Warranty and Support

The YADEA G10 Electric Scooter is CE certified, indicating compliance with European safety standards.

For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

For technical support or service inquiries, please contact the EU SuperDeal Store customer service.

8. User Tips

• Check Local Regulations: Before riding, always verify and comply with your local country's regulations regarding electric scooter usage, including speed limits and licensing requirements.
• Regular Checks: Make it a habit to perform a quick check of brakes, tires, and overall scooter stability before each ride.
• Battery Care: To prolong battery life, avoid completely draining the battery and store the scooter with a partial charge if not used for extended periods.
• Smooth Acceleration: For a smoother ride and better battery efficiency, accelerate gradually rather than abruptly.