MEKEDE 12.3" Android 14 Car Radio

Contents

MEKEDE 12.3" Android 14 Car Radio User Manual

Model: 12.3" Android 14 Car Radio

For BMW 1 Series F20 F21 & 2 Series F23 NBT System

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE 12.3" Android 14 Car Radio. Please read this manual thoroughly before use to ensure proper functionality and safety.

1.1 Disclaimer

  • For your safety, it is advisable to not watch video or operate the machine when you are driving. While driving, please adjust the volume to the optimum level.
  • Before operating the machine, you are advised to read carefully and understand the safety instructions and warning signals stated in the manual. Keep the manual within reach for future reference.
  • Firstly, please ensure safety on the road.
  • In difficulty operating the machine, please stop the car safely before you operate the machine.
  • Keep the machine out of reach from children to prevent unnecessary injury or damage to the machine.
  • While using the GPS navigation, please adhere to the traffic rules.
  • Please do not operate the machine at restricted areas such as petrol station, wine refinery, strong electromagnetic obstruction area to prevent danger.
  • Please do not install, maintain or repair the machine on your own with the power on. It is very dangerous to install and repair the machine by personnel without proper professional installation training and experience on electronic device and automobile parts.
  • Please do not install or store the machine, especially the LED display screen directly under sunlight or hazardous substances. During installation, please ensure no direct contact with the air-conditioner's ventilation duct. This will cause damage to the machine, the car or injury to the human body.
  • Please do not use sharp objects to scratch or press the display screen vigorously as this may damage the screen.
  • Please do not expose the machine under humid weather or direct contact with liquid to prevent fire or lighting.

2. Compatibility

This car radio is compatible with the following BMW models and years, specifically for vehicles with the NBT System:

  • BMW 1 Series F20 F21 (2011-2016)
  • BMW 2 Series F23 (2013-2016)

Important Note: Please confirm your original car's startup screen and LVDS cable type before purchasing to ensure compatibility. Incorrect versions will not be compatible.

Original car screen and LVDS cable check

Image: Original car screen and LVDS cable check for compatibility.

Original car screen and LVDS cable check, another view

Image: Another view of the original car screen and LVDS cable for compatibility verification.

3. Package Contents

The package includes the main unit and various accessories for installation and functionality. Please check all items upon receipt.

3.1 Android System Accessories List (10.25-inch)

Android System Accessories List for 10.25-inch unit

Image: Android System Accessories List for the 10.25-inch unit, showing power cable, AUX cable, and USB cable.

3.2 Android System Accessories List (12.3-inch)

Android System Accessories List for 12.3-inch unit

Image: Android System Accessories List for the 12.3-inch unit, including machine, packaging box, power cable, GPS antenna, AUX cable, 4G antenna, MIC, and USB cable.

3.3 Linux System Accessories List

Linux System Accessories List

Image: Linux System Accessories List, showing machine, packaging box, power cable, GPS antenna, AUX cable, 4G antenna, MIC, and USB cable.

3.4 Product Overview (Back Panel)

Back panel connections of the car radio

Image: Back panel connections, including Mouse, USB Input, 4G WIFI Antenna, GPS Antenna, Rear View Camera Input (CVBS/AHD), Reversing Detection Line, Camera Power Supply, Reserved ACC Line, External Microphone, Audio cable (E60 only Use), and ISO Port.

4. Specifications

4.1 Android System Parameters

Android System Parameters Table

Image: Table detailing Android system parameters including Model, System, CPU, RAM/ROM, Core, FinFET, Internet, Screen, DSP, Split Screen, Car-play, Android Auto, USB, and UI.

  • Operating System: Android 14
  • Resolution: 1280*480 or 1920*720 HD touch display screen
  • Processor: MTK / 7862 (4 Core or 8 Core)
  • RAM: Up to 12G
  • ROM: Up to 512G
  • Connectivity: Built-in 4G LTE + 5G WiFi, Bluetooth BT 5.0
  • Special Features: Built-In Speaker/Microphone, WiFi function, Support 3G/4G Network, Support Can-Bus, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control.
  • Digital Media Format: CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
  • OSD Language: Multi-language support including English, Chinese, Arabic, French, German, Italian, Japanese, Korean, Portuguese, Russian, Spanish, Thai, Turkish, Ukrainian, Vietnamese, etc.
  • Out Power: 4*45w
  • Voltage: 12 V
  • Material: Plastic + Hardware + Screen
  • Certification: CE, FCC, RoHS, WEEE

4.2 Linux System Parameters

Linux System Parameters Table

Image: Table detailing Linux system parameters including System, CPU, RAM, Size, Resolution, Color depth, Touch screen, WIFI, Bluetooth, Video playing, USB-connector, Original, and Language.

  • System: LINUX
  • CPU: T113 (Dual-core Cortex-A7)
  • RAM: 256MB
  • Size: 10.25-inch/12.3-inch
  • Resolution: 1920*720
  • Touch screen: Capacitive screen
  • WIFI: Dual mode 2.4G\5G, IEEE 802.11b\g\n
  • Bluetooth: BLUETOOTH V2.1 + EDR
  • Video playing: 1080p@30fps\50Mbps (H.264)
  • USB-connector: 2 way, USB2.0
  • Original: Built-in Analog input all the way
  • Language: Chinese, English, Portuguese, Scottish, Vietnamese, Russian, Spanish, German, French, Korean, Estonian, Danish, Ukrainian, Czech, Polish, Japanese, Italian, Arabic

Note: Linux systems do not support 4G and DSP. Certain features are only accessible via CarPlay, Android Auto, and mirroring links. If these features are critical, please consider purchasing an Android system.

5. Installation

The car radio is designed for plug & play installation. The power cable is pin-to-pin, allowing direct connection to the car's power interface.

Plug & Play wiring diagram

Image: Diagram illustrating the plug & play wiring for easy installation.

5.1 Installation Effect (10.25-inch)

10.25-inch unit before and after installation

Image: Comparison of the car dashboard before and after installing the 10.25-inch unit.

5.2 Installation Effect (12.3-inch)

12.3-inch unit before and after installation

Image: Comparison of the car dashboard before and after installing the 12.3-inch unit.

5.3 GPS Antenna Installation Guide

Recommend installing the GPS antenna on the dashboard or rear shelf. The antenna should be installed on a leveled surface facing the sky to prevent blockage of radio waves as little as possible. Vehicles equipped with tempered glass or tint may weaken the receiving signal of the GPS antenna. Thus, it is recommended to install the antenna outside of the vehicle.

  • Before affixing the GPS antenna, please ensure using a suitable cleaner to clean the designated surface. After cleaning, tear off the back of the tape and press to place the GPS antenna.
  • Remove the side cover, move the cable through the storage box until it reaches the control panel of the machine. The cable needs to be fixed with a cable tie.
  • Connect the GPS antenna's plug to the machine.
GPS Antenna Installation Diagram

Image: Diagram showing recommended GPS antenna placement (1) on the dashboard, cable routing (3), and connection point (2).

  • Please ensure the system power is off when connecting to the GPS antenna.
  • Please do not shorten or extend the GPS cable. Altering the length of the cable may result in short circuit or malfunction that may damage the product.
  • The antenna should be installed on a leveled surface where radio waves will be blocked as little as possible, otherwise it will affect the accuracy of navigation.
  • Please do not interfere with the GPS antenna with the steering wheel or gear lever, as it may be dangerous.

5.4 AUX Port Note

This unit outputs sound through AUX. Please confirm that your car has an AUX function before ordering. If there is no AUX on your car, you may need to add an FM transmitter to produce audio, but the sound quality will not be as good as AUX. Please acknowledge this issue before placing the order.

AUX port check and FM transmitter note

Image: Illustration showing the AUX input selection on the original car system and a note about FM transmitters if AUX is unavailable.

6. Basic Operation

6.1 Power On / Off

  • When ACC is connected, press the power button on the front panel to switch on the machine.
  • Turn off the engine and unplug the car key to switch off.

6.2 Volume Adjustment

Press "+" or "-" on the front panel (some models have VOL+/VOL- buttons) to adjust the volume.

6.3 Mute Control

Press the left volume button to display the volume bar on the display screen. Press the media volume to MUTE.

6.4 Backlight Control

Adjust the backlight at Display Setting under Car Settings.

6.5 Camera

The screen will automatically switch to rear view when the car is in reverse gear.

6.6 Playback Source Selection

On the front panel, press 'Application' to view Radio, Music, Video, USB play, TV (optional) or AVIN mode and options. On the homepage, touch the 'APP' icon to enter the application interface. Slide left or right to switch between different home pages.

Basic operation interface showing various functions

Image: Overview of the main interface and various functions like Car-Play, DSP, GPS, Split Screen, and Bluetooth.

6.7 Playback Mode and Position Memory

When you reboot the machine, the system will resume to the earlier mode prior to shutdown. For radio, it will resume to the radio channel prior to shutdown. For music or video, it will resume playing the last song or video prior to shutdown.

7. Car Infotainment Settings

Touch the 'Settings' icon on the front panel to enter the Settings interface. Select the corresponding option to enter the desired settings. Move the options bar up and down to find the desired settings.

Settings interface overview

Image: Overview of the settings interface, showing UI Style, Sound Setting, Navigate Setting, BackCar Setting, Personalization, System Info, and More Setting options.

7.1 Network & Internet

7.1.1 Wi-Fi Connection

Go to Settings > Wi-Fi to ensure Wi-Fi is switched on. Search for your desired Wi-Fi hotspot, insert the password, and touch 'Connect'. You may change the language type, language input, and keyboard type in this interface.

7.1.2 More

Setting of personal hotspot and VPN is allowed.

7.2 General Settings

7.2.1 Sleep Mode

Toggle ON/OFF for sleep mode functionality.

7.2.2 Touch Assist

User can choose to turn on or off the touch assist. The touch assist has 7 most commonly used options and is displayed on top of the screen at the interface, providing easy maneuverability.

7.2.3 Reverse Volume Control

To adjust the volume while in reverse, select Reverse Volume Suppression. Options include None, Weak, Medium, and Strong. 'None' means no change to default volume, 'Strong' lowers the volume the most.

7.2.4 Restore Factory Setting

Touch 'Restore Factory Setting', confirm in the popup dialog. The machine will restart and restore to factory settings, removing all user settings.

7.3 Display Setting

Adjust the display brightness of the background for different timings (daytime and nighttime).

7.4 Volume Option

Volume options for respective systems can be adjusted according to desire.

7.5 Sound Effect

Enter the sound effect interface by touching "Sound Effect" to access different sound effect modes.

DSP 32 EQ Adjustments Interface

Image: Interface for DSP 32 EQ Adjustments, allowing fine-tuning of audio frequencies.

7.5.1 Balance Setting

Touch the four arrows to adjust the 4 speakers' volume to control the sound effect. The 4 speakers' volume is consistent when the black dot is at the center. Touch the restore icon to restore the defaulted balance setting.

7.5.2 Loudness Setting

Slide left or right to adjust the loudness. Higher loudness increases the low-frequency value of the sound. Adjust reasonably to avoid loss of frequency signal.

7.6 Video Option

7.6.1 Video in Motion

Slide the button to the right to enable or disable the video in motion option. If disabled, the user cannot watch video and view pictures while the car is in motion. It is recommended to enable this option for your safety.

7.7 Navigation Setting

7.7.1 Reversal Warning Line

The camera of some car models may not have a reversal-warning line. By enabling this option, the user is able to see the distance to the warning line on the display during reverse.

7.7.2 Navigation Application Option

User may insert a pre-installed navigation application to pair with the navigation button. The system will automatically display all installed applications, and you may touch to select the application of your choice. You can also go to "Car Setting" > "Navigation Setting" > "Navigation Application Option" to link the navigation button and application. Upon linkage, the user may press the "Navigation Button" to start navigation directly.

7.8 Bluetooth Setting

Bluetooth interface for calls and music

Image: Bluetooth interface showing call functions, contacts, and music playback.

7.8.1 Pairing with Mobile Phones

  • To activate the Bluetooth hands-free function, pair your mobile phone with the machine first.
  • Turn on Bluetooth and Bluetooth device search function on your mobile phone.
  • Search for the name of the machine (e.g., BT5454).
  • You are required to key in the corresponding PIN number (e.g., 0000) on your mobile phone to connect to the machine.
  • Once connected, a "CONNECTED" sign will appear on the screen.

If the mobile phone has already been paired with the machine, the user can touch the connect icon directly to connect to Bluetooth in the next connection. The user may also touch the disconnect icon to disconnect.

7.8.2 Making Phone Calls

Upon establishing the Bluetooth connection, the user can dial directly on the phone or key in telephone numbers on the dial pad. Touch the delete icon to remove incorrect numbers. To call, press the green call icon, or the red hang-up icon to end a call.

7.8.3 Syncing Contacts

The machine supports syncing contacts from the mobile phone. Once Bluetooth is connected, touch the sync icon to download contacts. Once downloaded, the contact will be synced and shown on the display screen during phone calls. For quick access, the contact book supports name search by the first alphabet.

7.8.4 Call History

Call history shows outgoing, incoming, and missed calls. The user can perform calls or delete entries from the call history.

7.8.5 Bluetooth Music

This machine supports Bluetooth music playing. The user can play music on the mobile phone and transfer it to the car's speakers via Bluetooth. It also supports simplified controls such as "Previous", "Next", "Pause", and "Play". Due to Bluetooth compatibility, the machine may not support all phone models. Please contact us if you encounter problems connecting to Bluetooth.

7.9 Maneuver Control

This section covers settings related to vehicle maneuvers, such as door alarms and other vehicle-specific controls.

7.10 Version Information

This section displays the system's version information, including ROM, RAM, WIFI MAC, BT MAC, BT Version, Android Date, Android Version, CANBUS Version, MCU Version, and APP Version.

8. Applications

8.1 Navigation (GPS)

The GPS navigation system provides precise positioning and fast calculation speed, while the navigation map offers extensive information, data, and route planning. It supports Google Maps online navigation + built-in offline map navigation.

GPS Navigation and Split Screen Interface

Image: Interface showing GPS navigation and split-screen functionality.

8.1.1 Navigation Map Data

User may copy navigation map data into the internal SD card. Ensure sufficient storage space. Unnecessary data can be deleted via the defaulted ES File Explorer. Data for some navigation applications can be stored externally in an SD card or USB drive.

8.1.2 Installation of APK Navigation Application

Before navigation, install the APK Navigation Application and ensure the APK navigation map is correctly installed. Upon successful installation, a corresponding icon will appear on the homepage. Touch the icon to launch the application.

8.2 Music

The machine supports MP3 cover display. If the song comes with cover data, it will be shown on the cover display. You can also use repeat and shuffle functions.

8.3 Video

Touch the music video icon at the main interface. It supports flash internal storage card, music, and video stored in USB drive, APE, FLAC, and other formats.

8.4 Built-in Carplay & Android Auto

This feature allows you to use iPhone and Android devices intelligently and safely in your car. You can use navigation, make calls, send and receive messages, and listen to music while staying focused. The phone screen can be mirrored to the player.

Built-in Carplay and Android Auto interface

Image: Interface showing Wireless Car-Play (iOS system) and Wired Auto (Android system) connection steps.

8.5 Dual System Free Switching

Compatible with the original car system, you can switch between the original car system and the Android 14 system at will.

Dual system switching interface

Image: Interface demonstrating the seamless switching between the original car system and the Android 14 system.

8.6 Car Information Service Condition

The speed, fuel level, oil pressure, and safety warnings can be displayed on the dashboard.

Car information display on dashboard

Image: Dashboard display showing speed, engine speed, remaining fuel, temperature, parking brake, seat belt reminder, and door display.

8.7 Optional Functional Accessories

  • ADAS DVR Dash Cam Camera: Provides anti-collision warning, front vehicle distance prediction, front vehicle anti-collision warning, and lane departure warning for safer driving. (Optional accessory)
  • ADAS DVR Dash Cam Camera features

    Image: Features of the optional ADAS DVR, including front car start reminder, lane deviation warning, and front distance collision warning.

  • Rear Parking Camera: Automatically switches to the back-up camera image view with parking lines when the car is in reverse gear. (Optional accessory)
  • Rear Camera Support

    Image: Display showing AHD Reversing Video with parking lines for enhanced clarity.

  • TPMS (Tire Pressure Monitoring System): Real-time monitoring of tire pressure and temperature for effective safety. (Optional accessory, built-in or external)
  • TPMS Support

    Image: Display showing TPMS interface with real-time tire pressure and temperature statistics, and options for external or built-in TPMS sensors.

  • OBD2 Car Function Status Monitoring: Retrieve real-time data and trouble codes from your vehicle's computer. (Optional accessory)
  • OBD2 Support

    Image: Display showing OBD2 interface for diagnosing car status and retrieving real-time data and fault codes.

  • SWC Bluetooth Steering Wheel Control
  • DAB+

9. Maintenance

9.1 Display Screen Instructions

9.1.1 Notes

  • Do not expose the display screen directly under sunlight or heat for a long period to prevent damage.
  • Do not expose the display screen directly under sunlight when it is not in use.
  • The display screen should be used within the temperature ranges: Operating: -10℃~+50℃; Storage: -20°C~+80℃.
  • The LCD screen is a full frontal display for better viewing. Do not press vigorously. Touch gently to prevent scratches or dust.
  • Shall not interfere with airbag installation or other safety features.
  • Small black or bright dots may appear on the LCD screen; this is a specification, not a defect.
  • In cold areas, the LCD screen may be dimmer after power on but brightness will adjust to normal after a short while.
  • If exposed directly under sunlight, the screen may be difficult to see due to reflection.

9.1.2 Maintaining the LCD Screen

  • Please turn off the power before cleaning the LCD screen.
  • Wipe the screen with a soft fabric to prevent scratches.
  • Do not use wet towels, benzene, or chemical cleaners.

10. Troubleshooting Guide

If you encounter problems, refer to this guide. If issues persist, contact a professional or customer service. Do not dismantle the machine without proper advice.

IssueCauseAction (Reference)
Unable to power onCar key not inserted or ACC not turned onInsert car key and turn on ACC
Power cord not connectedConnect power cord correctly
Fuse is damagedReplace similar fuse
Unresponsive touch screenSystem may be multitasking (e.g., navigation)Wait a moment. If problem persists, contact customer service.
No rear view imageNo reverse camera installedInstall reverse camera and plug into CCD socket
Reverse camera type does not matchReplace reverse camera
Rear view appears during reverse position even when system is not booted. Power button is null.Safety feature: rear view function is preset for safety priorityPower on to boot system after resuming from reverse position to normal
No GPS signalGPS antenna not connectedConnect GPS antenna correctly
Car may be at a GPS signal blind spotDrive for a distance to check
Positioning and navigation failed upon power onBlind spot of navigation map. Some remote areas or routes may not be covered.Contact customer service to update map
Unable to locate destination routesIncorrect spelling of destination or map not updatedEnsure correct spelling, try possible names. If still unable, map may not be updated.
Navigation routes are farNavigation system sets route based on built-in rules, distance, road grade, traffic rules, etc.May be due to scale setting. Try zooming in/out. If problem persists, may be due to GPS signal loss. Reset destination or select new landmark.
No Sound ProblemOriginal car Fiber optic cable not connected or AUX mode not selected.1. Connect original car Fiber optic cable to conversion line interface, then to host. 2. Connect "AUX" and switch mode to "AUX".
Original system doesn't show upLVDS cable not connected correctly.Connect the original LVDS cable to the back connector of the Android radio.
Original system is flashingIncorrect resolution setting.Go to "Setting" > "Personalized Setting" > "Resolution ratio". The display screen of the original car should correspond to the option, otherwise the display is poor.

11. User Tips

  • GPS Reception: If GPS reception seems poor, consider optimizing the external GPS antenna placement for better signal acquisition.
  • Audio Issues (Android Auto/Calls): For optimal Android Auto and call functionality, ensure your device's firmware is up to date. If audio is only coming from one side during calls, check the audio balance settings.
  • Firmware Updates: Regularly check for and install firmware updates for improved performance, especially for features like Zlink/Android Auto. Contact support for firmware updates if not available through the device.
  • No Sound: If you experience no sound, verify your car's AUX port functionality and ensure it is correctly connected and selected as the audio source, as detailed in the 'How To Solve No Sound Problem' section.

12. Warranty & Support

The product comes with a 3-year warranty. For any issues or support, please contact the seller or manufacturer directly. Free firmware, software, user interface, and GPS navigation map updates are offered.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.