Introduction
Thank you for choosing the ODK Reversible L-Shaped Gaming Desk. This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your new desk. Please read these instructions carefully before beginning assembly and retain them for future reference.
This versatile L-shaped desk is designed to optimize your workspace, offering a spacious surface for gaming, working, or studying. Key features include a reversible design allowing for left or right-hand configuration, an integrated monitor stand, a built-in power strip with USB charging ports, a convenient side storage bag, and a dedicated CPU stand.
Setup and Assembly
The ODK L-Shaped Gaming Desk requires assembly. Please ensure all parts are present before you begin. It is recommended to assemble the desk on a soft, clean surface to prevent scratches.
Package Contents:
- Desk panels (main desktop, L-extension, monitor stand, shelves)
- Metal frame components (legs, support bars)
- Hardware pack (screws, bolts, Allen wrench, etc.)
- Built-in power strip with USB ports
- Side storage bag
- Adjustable foot pads
- Assembly instructions (this manual)
Assembly Steps (General Guidance):
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and compare them against the parts list (usually provided in a separate sheet or diagram).
- Assemble the Main Frame: Begin by connecting the main metal frame components using the provided hardware. Do not fully tighten screws until all parts are aligned.
- Attach Desk Panels: Secure the main desktop panel to the assembled frame.
- Configure L-Shape (Reversible): Decide whether you want the L-extension (side shelf unit) on the left or right side of the main desk. Attach the L-extension frame and panels accordingly.
Figure 2: Example of right-side shelf configuration. 
Figure 3: Example of left-side shelf configuration. - Install Monitor Stand: Attach the monitor stand to the main desktop as indicated in the specific assembly diagram.
- Integrate Power Strip: Carefully insert the built-in power strip into its designated slot on the desktop. Ensure it is flush and secure.
- Attach Accessories: Mount the side storage bag and place the CPU stand in its designated area.
- Final Tightening: Once all components are in place and aligned, gradually tighten all screws and bolts. Do not overtighten.
- Adjust Leveling Feet: Adjust the foot pads at the bottom of the desk legs to ensure stability and prevent wobbling on uneven floors.
For detailed, step-by-step visual instructions, please refer to the assembly diagram included with your product packaging.
Operating Features
Built-in Power Strip with USB Ports:
Your ODK desk is equipped with a convenient power strip to keep your devices charged and organized.
- AC Outlets: The power strip includes two (2) AC outlets, rated for 220-250V/16A. Use these for your monitor, computer, or other AC-powered devices.
- USB Charging Ports: Two (2) USB ports are provided, offering 5V/2A output for charging smartphones, tablets, and other USB-powered accessories.
- Power Cable: The power strip is connected via a 200cm (approximately 6.5 feet) power cable. Ensure it is plugged into a suitable wall outlet.
Monitor Stand:
The elevated monitor stand helps improve your ergonomic posture by raising your screen to a more comfortable viewing height.
Side Storage Bag:
Utilize the fabric storage bag attached to the side of the desk for keeping documents, notebooks, or small accessories within easy reach.
CPU Stand:
The dedicated CPU stand provides a safe and elevated space for your computer tower, protecting it from dust and accidental kicks, and freeing up desktop space.
Maintenance
- Cleaning: Wipe the desk surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the desk material.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Retighten if necessary to maintain stability.
- Weight Distribution: Distribute weight evenly across the desk surface to prevent stress on any single point.
- Power Strip Care: Ensure the power strip is kept dry. Do not overload the outlets.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk is wobbly/unstable. | Loose screws or uneven floor. | Ensure all assembly screws are tightened. Adjust the leveling foot pads on the bottom of the desk legs. |
| Power outlets/USB ports not working. | Power strip not plugged in, tripped circuit, or faulty connection. | Check if the power cable is securely plugged into a wall outlet. Test the wall outlet with another device. Check for any reset buttons on the power strip (if applicable). Ensure the power strip is correctly installed in the desk. |
| Difficulty during assembly. | Incorrect part orientation or missing steps. | Refer to the detailed assembly instructions and diagrams. Double-check part numbers and orientations. Do not force parts together. |
Specifications
| Feature | Detail |
|---|---|
| Type | L-Shaped Gaming/Computer Desk |
| Dimensions (Overall) | 120cm (Length) x 80cm (Width) x 76cm (Height) |
| Monitor Stand Height | 12cm (above main desktop) |
| Monitor Stand Depth | 19.8cm |
| Weight | Approx. 25 kg |
| Frame Material | Metal |
| Installation Method | Assembly |
| Power Strip AC Outlets | 2 (220-250V/16A) |
| Power Strip USB Ports | 2 (5V/2A) |
| Power Cable Length | 200cm |
| Reversible Design | Yes (L-extension can be left or right) |
User Tips
- Pre-Assembly Check: Before starting assembly, lay out all parts and verify against the included parts list. This helps prevent re-assembly due to missing or incorrect parts.
- Ergonomic Setup: Adjust your monitor height using the integrated stand to ensure your eye level is at the top third of your screen, promoting better neck and back posture.
- Cable Management: Utilize the space behind the monitor stand and the desk's structure to manage cables, keeping your workspace tidy and safe.
- Maximize Storage: Make full use of the side storage bag and the open shelves for books, office supplies, or gaming accessories to keep your desktop clear.
Warranty and Support
For any questions regarding assembly, missing parts, or product functionality, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Manufacturer/Brand: ODK (or XMSJ, as per product properties)
Please refer to the original product packaging or purchase documentation for specific warranty terms and contact information.
