ACCEO 4K Car Dash Cam User Manual

Introduction and Important Notice

Thank you for choosing our ACCEO 4K Car Dash Cam. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

Important Notice:

1. Before using the product, please read and understand all the instructions in this user manual.
2. Only use the original safety-tested accessories provided by the manufacturer.
3. Remove the protective film on the screen and lenses before using the product.
4. The dash cam must not be placed in a location that may affect the deployment of airbags or obstruct the driver's view.
5. Securely mount this product before driving. Ensure the lenses are clean and not blocked.
6. Do not leave the product in direct sunlight or extremely high temperatures. The operating temperature ranges from -20°C (-4°F) to 60°C (140°F).
7. A formatted memory card is required before first-time use.
8. Drive safely! Do not operate the product while driving to avoid distraction. Park your car in a safe place before operating the device.

Package Contents

The package contents may vary based on the specific kit purchased. Please check your order details for exact inclusions.

Standard Package:

• 1 x Packaging box
• 1 x DVR (Dash Cam)
• 1 x Electrostatic sticker
• 1 x Power charger (Car Charger)
• 1 x User manual
• 1 x USB Card Reader (Gift)

Optional Components:

• 1 x GPS module
• 1 x 1080P Sony Night Vision Rearview Camera with 6 Meters Cable
• 1 x Hardwire Kit for 24H Parking Monitoring
• 1 x Real Class 10 High Speed TF Card (16GB to 256GB)

Specifications

Setup and Installation

1. Memory Card Installation:

• Insert a Class 10 or above Micro SD card (16GB to 256GB recommended) into the memory card slot.
• Format the SD card before first-time use.
• Important: Do not insert or remove the memory card while the driving recorder is turned on to avoid damage.

2. Dash Cam Placement:

• Attach the dash cam to a suitable position on the front windshield using the electrostatic sticker.
• Adjust the viewing angle accordingly to ensure a clear view of the road.

3. Power Connection:

• Connect the USB power cable to the Type-C USB power port on the Dash Cam.
• Plug the car charger into your car's cigarette lighter socket.
• Note: The DVR is compatible only with 12V power supplies. Using a 24V supply without a 24V to 12V converter will damage the motherboard.

4. Rear Camera Installation (Optional):

• Connect the rear camera to the Dash Cam using the extension cable.
• Install the rear camera on the rear windshield.
• To enable the auto-reversing function with parking lines, connect the rear camera's red cable wire to your car's reverse lamp power's positive pole (+).
• Warning: Due to different car models, professional assistance is recommended for rear camera installation. This method is for reference only.

5. Hardwire Kit Installation (Optional, for 24H Parking Monitoring):

• The Hardwire Kit allows for 24-hour parking monitoring without occupying the cigarette lighter interface.
• Identify two fuse slots in your car: one providing constant power (for the RED wire) and one providing power only when the key is in the ACC position (for the YELLOW wire).
• Connect the BLACK wire to a grounding screw or bolt.
• Note: Use only ACCEO's customized Hardwire Kit specifications for compatibility.

Operating Instructions

1. Buttons and Lights:

• Short press button (3 seconds): Take a photo.
• Click button: View WiFi information / Switch between Front Camera / Rear Camera.
• Long press button: Power On/Off.
• Press button (8 seconds): Restore factory settings.
• Blinking red light: Indicates video recording (Front/Rear camera).
• Blinking yellow light: Indicates locked video recording (G-sensor activated).

2. Installing the Viidure App:

The Viidure app allows you to control the dash cam, view recordings, and manage settings from your mobile phone (supports both Apple and Android).

1. Scan the QR code below or search for "Viidure" in the App Store (iOS) or Google Play Store (Android) to download the app.
2. WiFi Name: Dashcam-******
3. WiFi Password: 12345678
4. Note: Please agree to the app's system permissions. If you accidentally deny permissions, clear the app's data in your phone settings to restore its initial state.

3. WiFi Connection Steps:

1. Ensure your mobile phone's Wi-Fi is on and the dash cam is powered. Open the Viidure app.
2. Connect the dash cam to its power supply. Click 'OK' if prompted for location permission.
3. In the app, tap 'Connect Wi-Fi'. Your phone will jump to the Wi-Fi settings. Select the dash cam's Wi-Fi network (e.g., Dashcam-D45F78) and enter the password (12345678).
4. Return to the app and click 'CONNECT'.
5. Upon successful connection, you will enter the dash cam interface.

4. App Interface Introduction:

• Memory capacity: Displays current storage usage.
• Take a picture: Capture still images.
• View photos and videos: Access recorded media.
• Settings: Configure various dash cam parameters.

5. App Function Settings:

• Sound Recording: Toggle video sound on/off.
• Speaker Volume: Adjust dash cam speaker volume (Mute, Low, Medium, High).
• Video Resolution: Set recording resolution (Front: 4K (3840x2160), Rear: 1080P (1920x1080)).
• Loop Recording Duration: Set recording segment length (1 Min, 3 Min, 5 Min). Older files are overwritten when the memory card is full.
• Mirror: Toggle video mirroring on/off.
• Flip: Toggle video flipping on/off.
• Collision Sensing: Adjust G-sensor sensitivity (Off, Low, Medium, High). When activated, the dash cam automatically locks the current video upon impact.
• Collision Detection Sensitivity for Parking: Adjust sensitivity for parking mode (Off, Low, Medium, High).
• Time-Lapse Recording Duration: Set duration for time-lapse parking mode (Off, 15 Min, 12 Hours, 24 Hours). Requires a separately purchased hardwire kit.
• Low Voltage Regulation: Set voltage cut-off for parking mode (11.8V, 12.0V, 12.2V). If the vehicle battery drops below this, the camera shuts down. Requires a separately purchased hardwire kit.
• WiFi Password: Reset Wi-Fi password. You will need to change the Wi-Fi password in your phone settings.
• Firmware Version: Displays current firmware version.

6. GPS Functionality:

The dash cam supports an external GPS module (optional) to record driving speed and trajectory.

• After successful GPS connection, the speed icon on the dash cam will turn green.
• Watching GPS videos on computer (Windows): Insert the TF card into your computer. Select the GPS player installation package, unzip, and install GXPlayer to watch videos.
• Watching GPS videos on computer (iOS): Install GXPlayer APP on your MacBook to watch videos directly.
• Watching GPS videos on mobile app: Connect your phone to the dash cam's Wi-Fi, enter the Viidure app, go to the APP photo album, select a video, and download it to your phone's local photo album. Exit video recording and go to 'Local Files' in the app. Downloaded videos can be viewed with Wi-Fi turned off.

7. Smart Voice Control:

The dash cam features voice playback for commands like starting recording, connecting to Wi-Fi, etc. (English playback), allowing hands-free operation.

8. Video Demonstration:

Maintenance

1. Formatting SD Card:

If the memory card is abnormal, format it through the app settings or replace it with a new one. Regular formatting helps maintain optimal recording performance.

2. Factory Reset:

If you encounter persistent issues, you can restore the dash cam to factory settings via the app. If problems persist after a factory reset, please contact customer support.

Troubleshooting

1. Wi-Fi Connection Issues:

• If you cannot connect to Wi-Fi, ensure the dash cam is powered on and Wi-Fi is enabled on both the dash cam and your phone.
• If the app disconnects from Wi-Fi within 5 minutes of starting the dash cam, click the button on the dash cam to restart Wi-Fi.
• Ensure you have granted all necessary system permissions to the Viidure app. If not, clear the app data in your phone settings and try again.
• If issues persist, try restoring factory settings.

2. GPS Signal Issues:

Factors that can affect GPS signals:

• Other signal interference within the car.
• Severe weather conditions (rainstorm, snowstorm, etc.).
• Driving through tunnels with weak signals or in remote mountainous areas.

3. Video Playback Issues:

• GPS videos require a dedicated player (GXPlayer) for viewing on a computer.
• To view GPS videos on the mobile app, you must first download them to local files.

User Tips

• For optimal performance, regularly check that the dash cam lenses are clean and free from obstructions.
• Periodically back up important video files from your memory card to prevent accidental overwriting.
• Ensure your dash cam's firmware is up to date for the latest features and bug fixes. Check the app for updates.
• When using the 24-hour parking monitoring feature, ensure your car battery is in good condition and consider the low voltage cut-off setting to prevent battery drain.

Warranty and Support

One Year Limited Warranty:

We are committed to providing the best product experience and after-sale service. Your ACCEO Dash Cam comes with a one-year limited warranty. If any machine parts are damaged or you encounter problems during use, we will provide timely solutions and a satisfactory experience.

Contact Support:

For any questions, issues, or warranty claims, please contact us with your online order details. We offer free replacement and lifetime technical support. You may also be eligible for free accessories.

Email: maierdirect@outlook.com