ATK X1 V2 Series Wireless Gaming Mouse User Manual

1. Introduction

Welcome to the ATK X1 V2 Series Wireless Gaming Mouse user manual. This guide provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new high-performance wireless mouse. The ATK X1 V2 Series offers an ultra-lightweight design, advanced sensors, and low-latency wireless connectivity for both gaming and office use.

The X1 V2 Series includes several models: the X1 V2 Ultra Max, X1 V2 Ultimate, and X1 V2 Extreme. Each model is engineered for superior performance, featuring ATK's self-developed Nordic 54 Series Solution, high-density batteries for extended life, and custom optical switches for precise control.

2. Product Overview

2.1 Key Features

• Ultra-lightweight Design: Weighing approximately 54-55g for agile movement.
• Advanced Wireless Technology: 2.4Ghz wireless with 8K polling rate receiver for minimal latency.
• High-Performance Sensors: Equipped with PAW3395Ultra or PAW3950Ultra flagship sensors.
• Nordic 54 Series Controller: ATK self-developed solution for optimized performance and power efficiency.
• Extended Battery Life: Up to 800+ hours (1000Hz mode) for Ultra Max and Ultimate models, 265+ hours (1000Hz mode) for Extreme model.
• Durable Switches: ATK Custom Optical Switches or Jiguang optical micro-switches with 150 million click lifespan.
• Nano Coating: Sweat-resistant, stain-resistant, and easy to clean.

2.2 Package Contents

The contents of your mouse package may vary slightly depending on the specific model (Ultimate/Extreme vs. Ultra Max).

X1V2 Ultimate/Extreme Packaging List:

• ATK X1 V2 Wireless Gaming Mouse
• GEM 8K Receiver
• 8K Data Cable
• Gray Double-layer Anti-dent Foot Stickers (high content PTFE)
• Same Color Anti-slip Sticker
• User Guide
• Warranty Certificate
• Safety Specification Guide

X1V2 Ultra Max Packaging List:

• ATK X1 V2 Wireless Gaming Mouse
• New NANO 8K Receiver
• 8K Data Cable
• Gray Double-layer Anti-dent Foot Stickers
• Same Color Anti-slip Sticker
• Adapter
• User Guide
• Warranty Certificate
• Safety Specification Guide

3. Setup Instructions

3.1 Initial Connection

1. Unpack the mouse and all accessories.
2. Locate the 8K receiver (GEM 8K or New NANO 8K) from the package.
3. Plug the 8K receiver into an available USB port on your computer.
4. Turn on the mouse using the switch located on the bottom of the mouse.
5. Your computer should automatically detect and install the necessary drivers.

3.2 Charging the Mouse

To charge the mouse, use the provided 8K data cable. Connect one end to the mouse's charging port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The mouse features a high-density battery for long-lasting performance.

3.3 Software Installation (ATK HUB 3.0)

For advanced customization, including DPI settings, button remapping, and macro creation, download and install the ATK HUB 3.0 software from the official ATK website. This software allows you to unlock the full potential of your ATK X1 V2 mouse.

3.4 System Requirements for Optimal 8KHz Performance

To ensure optimal 8KHz usage experience with your ATK mouse, please confirm your computer meets the minimum recommended specifications below for best performance:

• CPU: Intel Core i7-9700K or above, AMD Ryzen 7 3700X or above
• Monitor: Refresh rate above 240Hz
• Graphics: NVIDIA GTX1080 or above, AMD RX5700 or above
• Memory: 16GB or more

4. Operating Instructions

4.1 Basic Operation

• Left/Right Click: Standard mouse buttons for primary actions.
• Scroll Wheel: Scroll up/down for navigation, click for middle-button functionality.
• Side Buttons: Typically used for forward/backward navigation in browsers or customizable functions in games.
• DPI Button: Cycle through preset DPI levels. Customize these levels using the ATK HUB 3.0 software.

4.2 DPI Adjustment

The ATK X1 V2 mouse offers a wide DPI adjustment range from 100 to 30000 DPI. The PAW3950Ultra sensor can be overclocked up to 42000 DPI. Use the dedicated DPI button on the mouse to switch between sensitivity profiles. Fine-tune these profiles and create custom ones via the ATK HUB 3.0 software.

4.3 Polling Rate and Latency

The mouse supports a wired/wireless dual 8K polling rate, ensuring ultra-low latency. The X1 V2 Extreme model boasts a key response delay of 0.163ms, while Ultra Max and Ultimate models have 0.181ms. This high polling rate provides precise and responsive tracking, crucial for competitive gaming.

5. Maintenance

5.1 Cleaning

The ATK X1 V2 mouse features a brand new nano coating, making it sweat-resistant, stain-resistant, and easy to clean. To clean your mouse, gently wipe its surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the coating or internal components.

5.2 Foot Pads

The mouse is equipped with high-content PTFE double-layer anti-dent foot pads (Ultimate/Extreme) or standard gray double-layer anti-dent foot pads (Ultra Max) for smooth gliding. If the foot pads show signs of wear, replacement pads are included in some packages or can be purchased separately to maintain optimal glide performance.

5.3 Battery Care

To maximize battery lifespan, avoid fully discharging the mouse frequently. Charge the mouse using the provided data cable when the battery indicator shows low power. Store the mouse in a cool, dry place when not in use for extended periods.

6. Troubleshooting

6.1 Connectivity Issues

• Mouse not responding: Ensure the mouse is turned on and the 8K receiver is securely plugged into a USB port. Try a different USB port.
• Intermittent connection: Ensure the mouse is within range of the receiver and there are no major obstructions. Avoid placing the receiver near other wireless devices that might cause interference.
• Lag or stuttering: Check if your computer meets the recommended system requirements for 8KHz polling rate (see Section 3.4). Update mouse drivers and firmware via ATK HUB 3.0.

6.2 Performance Problems

• Inaccurate tracking: Clean the mouse sensor with a soft, dry cloth. Ensure you are using the mouse on a suitable surface (preferably a mouse pad).
• Buttons not responding: Check for any physical obstructions. If using ATK HUB 3.0, ensure buttons are mapped correctly.

6.3 Battery Not Charging

• Ensure the charging cable is properly connected to both the mouse and the power source.
• Try a different USB port or power adapter.
• Verify that the charging cable is not damaged.

7. Specifications

8. User Tips

• Firmware Updates: Regularly check the ATK official website or ATK HUB 3.0 software for firmware updates to ensure optimal performance and access to new features.
• Surface Calibration: For the most accurate tracking, consider using the surface calibration feature in the ATK HUB 3.0 software if available, especially when switching mouse pads.
• DPI and Polling Rate: Experiment with different DPI settings and polling rates to find what works best for your specific games and tasks. Higher polling rates (like 8KHz) require more system resources, so ensure your PC meets the recommended specs.
• Lift-Off Distance (LOD): Adjust the LOD setting in the software to prevent unwanted cursor movement when lifting the mouse.

9. Warranty and Support

Your ATK X1 V2 Series Wireless Gaming Mouse comes with a manufacturer's warranty. Please refer to the warranty certificate included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please visit the official ATK website or contact their customer service department.

Keep your proof of purchase for warranty validation.