1. Introduction
The Insta360 Electric Suction Cup Mount is designed to provide a strong and stable mounting solution for your Insta360 camera on various surfaces, particularly vehicles. It features an electronic pump for automatic air removal and a built-in sensor to maintain consistent suction strength, ensuring your camera remains secure even on challenging terrains.
Key features include:
- Strong suction for secure attachment.
- Automatic sensor for continuous suction monitoring.
- Tested to handle 800G impacts.
- Up to 120 hours of runtime on a single charge.
- Adaptable to extreme temperatures, down to 5°F (-15°C).
- Compatible with NATO rails and Insta360 Dual/Triple Suction Cup Car Mounts for expanded shooting angles.
- Flexible double ball head for 360-degree rotation.
2. What's in the Box
The package includes the following items:
- 1x Electric Suction Cup Mount
- 1x Protective Cap
- 1x Clamp Mount
- 1x 1/4" to Ball Head Adapter
- 1x 3-Prong to Ball Head Adapter
- 1x NATO Rail Mount
- 1x Hex Wrench
- 1x Thumb Screw
3. Specifications
| Feature | Detail |
|---|---|
| Model | Electric Suction Cup Mount |
| Suction Cup Diameter | 115mm (4.5in) |
| Battery Capacity | 1000mAh |
| Energy | 3.7Wh |
| Battery Type | Li-Ion |
| Operating Temperature | 5°F to 131°F (-15°C to 55°C) |
| Storage Temperature | 23°F to 95°F (-5°C to 35°C) |
| Charging Temperature | 32°F to 104°F (0°C to 40°C) |
| Input | DC 5V/1A |
| Weight | 402g |
4. Setup
- Prepare the Surface: Before installing the mount, ensure that the surface where it will be attached (e.g., car body, window) is smooth and clean. Any dirt, dust, or grease can compromise suction.
- Attach the Mount: Press the mount firmly against the chosen surface. Adjust the angle as needed before initiating suction.
- Attach Camera: Secure your Insta360 camera to the mount using the appropriate adapter (1/4" to Ball Head Adapter or 3-Prong to Ball Head Adapter) and clamp mount.
5. Operating Instructions
- Check Battery Level: When the mount is powered off, press the button once to check the current battery level displayed on the screen.
- Activate Suction: When powered off, press and hold the button for 2 seconds to power on the Electric Suction Cup Mount. It will automatically begin removing air to create suction.
- Press the mount firmly against the surface until the suction percentage begins to increase on the screen.
- If the battery is below 10%, the mount will beep every 5 seconds to remind you to charge it.
- While suction is in progress, the indicator light flashes green, and the screen shows the current suction level. If no suction is detected within 10 seconds, the mount will automatically power off.
- When suction is complete, the indicator light turns solid green. You can gently shake the mount to confirm it's securely attached.
- The Electric Suction Cup Mount has a built-in pressure sensor that continuously monitors suction. If the pressure drops below a set threshold, it will automatically restart suction.
- Release Suction: During or after suction, double-press the button to release air. The screen will flash, and the indicator light will flash yellow while releasing air.
- Remove Mount: During or after suction, you can also pull the handle to remove the mount. The mount will automatically restart suction. To power off, press and hold the button or wait 10 seconds for auto shut-off.
- Re-activate Suction: When air has been released, press the button once to start suction again.
Video demonstrating the Insta360 Electric Suction Cup Mount in use, showing suction activation and camera mounting.
6. Maintenance
- Cleaning: Clean the suction cup after each use to maintain optimal suction power. Use a soft, damp cloth.
- Port Protection: When not charging, ensure the USB-C port's silicone plug is sealed to prevent water or dust from entering.
- Long-Term Storage: If the mount is not used for an extended period (e.g., 3 months), recharge the battery to prevent deep discharge.
- Avoid Chemicals: Do not expose the product to grease or chemical solvents for a long period, as this may weaken the suction.
7. Troubleshooting
- Weak Suction: Ensure the mounting surface is clean, smooth, and dry. Check for any debris under the suction cup.
- Battery Low Warning: If the battery level drops below 10%, the mount will beep. Remove the mount, charge it fully, and then reattach.
- Mount Detaches During Use: The built-in pressure sensor should automatically restart suction if pressure drops. However, for vehicle use, it is suggested to gently shake the suction cup every 6 hours to ensure it remains secure. Always ensure the surface is clean and the mount is properly activated.
- Mount Not Powering On: Check the battery level and charge if necessary. Ensure the button is pressed and held for 2 seconds to power on.
- Damage/Malfunction: If malfunction or damage occurs due to failure to follow the instructions in this document, the product warranty may be void.
8. User Tips
- Always ensure the mounting surface is clean and dry for optimal suction.
- Regularly check the suction indicator, especially during long trips or in varying environmental conditions.
- Charge the mount fully before extended use to maximize its operational time.
- Consider using a safety rope (sold separately) for additional security, especially in high-speed or off-road scenarios.
9. Warranty and Support
This product is covered by a manufacturer's warranty. For detailed warranty information, service, or technical support, please refer to the official Insta360 website or contact their customer service directly. Keep your proof of purchase for warranty claims.