1. Introduction
Thank you for choosing the Akko 5108B Plus Mechanical Keyboard. This keyboard is designed for an enhanced typing and gaming experience, featuring hot-swappable switches, vibrant RGB backlighting, and versatile multi-mode connectivity. This manual provides detailed instructions on setting up, operating, maintaining, and troubleshooting your keyboard to ensure optimal performance.
2. Key Features
- 100% Layout: Full-size keyboard with 108 keys for comprehensive functionality.
- Hot-Swappable Switches: Easily change and customize switches without soldering.
- Akko V3 Piano Pro Switches: Linear switches with an operating force of 45 ± 5gf, total travel of 3.1mm, and pre-travel of 1.9 ± 0.5mm.
- PBT Dye-Sub Keycaps: Durable keycaps with legends embedded for long-lasting vibrancy.
- RGB Backlighting: Dynamic multicolor RGB lighting with various effects.
- Multi-mode Connectivity: Supports USB Type-C wired, 2.4GHz wireless (with receiver), and Bluetooth 5.0 connections.
- N-Key Rollover: Ensures all key presses are registered accurately.
- Disable Winlock: Prevents accidental interruptions during gaming.
- Wide Compatibility: Compatible with Windows, macOS, iOS, and Android operating systems.
3. Package Contents
Please check the package for the following items:
- Akko 5108B Plus Mechanical Keyboard
- USB Type-C Cable
- 2.4GHz Wireless Receiver
- Keycap Puller
- Switch Puller
- User Manual
4. Setup
4.1 Initial Power On
Before connecting, ensure the keyboard's mode switch (usually located on the back or side) is set to the desired connection mode (Wired, 2.4G, or BT).
4.2 Wired Connection (USB Type-C)
- Connect the USB Type-C cable to the keyboard's port.
- Connect the other end of the cable to an available USB port on your computer.
- The keyboard will be automatically recognized and ready for use.
Rear view of the keyboard, highlighting the USB Type-C port for wired connection.
4.3 2.4GHz Wireless Connection
- Set the keyboard's mode switch to 2.4G wireless mode.
- Plug the 2.4GHz USB receiver into an available USB port on your computer.
- The keyboard should connect automatically. If not, press Fn + 4 (or the designated 2.4G pairing key) to initiate pairing.
4.4 Bluetooth 5.0 Connection
- Set the keyboard's mode switch to Bluetooth mode.
- On your device (computer, tablet, phone), enable Bluetooth and search for new devices.
- Press and hold Fn + 1, Fn + 2, or Fn + 3 (depending on which Bluetooth profile you want to use) for 3-5 seconds until the indicator light flashes, indicating pairing mode.
- Select "Akko 5108B Plus" from the list of available Bluetooth devices on your device.
- Once connected, the indicator light will stop flashing. You can pair up to three Bluetooth devices and switch between them using Fn + 1/2/3.
Diagram illustrating the multi-mode connectivity options: 2.4G Wireless, Bluetooth, and USB Type-C.
5. Operating Instructions
5.1 Basic Key Functions
The Akko 5108B Plus features a standard 108-key layout. Refer to the keyboard layout for specific key placements.
Close-up view of the Akko 5108B Plus keycaps and overall layout.
5.2 RGB Lighting Control
The keyboard offers various RGB lighting effects. Use the following key combinations to control the lighting:
- Fn + \|: Cycle through different lighting effects.
- Fn + ↑ / ↓: Adjust brightness.
- Fn + ← / →: Adjust lighting speed/direction.
- Specific key combinations for color changes or static modes may vary; refer to the full manual or Akko software for advanced customization.
Akko 5108B Plus keyboard showcasing its dynamic RGB lighting effects.
5.3 Macro Programming
The keyboard supports Akko Macro V1.0. For detailed instructions on creating and assigning macros, please refer to the official Akko software or the comprehensive user guide available on the Akko website.
5.4 N-Key Rollover and Winlock
- N-Key Rollover: The keyboard supports N-Key Rollover, ensuring all simultaneous key presses are registered accurately, which is crucial for fast-paced gaming.
- Disable Winlock: The keyboard supports disabling the Windows key (Winlock) to prevent accidental presses during gaming sessions. Typically activated via Fn + Win key.
5.5 Polling Rate
The polling rate is 1000Hz in wired and 2.4G modes, providing rapid response times. In Bluetooth mode, the polling rate is 125Hz.
6. Maintenance
6.1 Cleaning Your Keyboard
- Disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and casing.
- For deeper cleaning, you can remove the keycaps using the provided keycap puller and use compressed air to clear debris from underneath.
- Avoid using harsh chemicals or abrasive materials.
6.2 Replacing Keycaps and Switches
The Akko 5108B Plus features hot-swappable switches, allowing for easy customization.
- Removing Keycaps: Use the keycap puller to gently pull keycaps straight up.
- Removing Switches: Use the switch puller to carefully grip the top and bottom clips of the switch and pull it straight out.
- Installing Switches: Align the pins of the new switch with the holes on the PCB. Gently push the switch down until it clicks into place. Ensure pins are not bent.
- Installing Keycaps: Align the keycap with the switch stem and push down firmly until it is seated.
Close-up view of the hot-swappable switch sockets with keycaps removed.
Diagram illustrating the components of an Akko V3 Piano Pro Switch.
7. Troubleshooting
- Keyboard not responding:
- Ensure the USB cable is securely connected or the 2.4GHz receiver is properly plugged in.
- Check the keyboard's mode switch to ensure it's set to the correct connection type.
- For wireless modes, ensure the keyboard battery is charged.
- Try connecting to a different USB port or device.
- Bluetooth connection issues:
- Ensure Bluetooth is enabled on your device.
- Forget the keyboard from your device's Bluetooth settings and re-pair it.
- Ensure the keyboard is in pairing mode (Fn + 1/2/3 flashing).
- RGB lighting not working:
- Check brightness settings (Fn + ↑).
- Ensure the keyboard is not in a low-power mode if operating wirelessly.
- Keys not registering or double-typing:
- This could indicate a faulty switch. Due to the hot-swappable design, you can replace individual switches.
- Ensure switches are fully seated in their sockets.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | AKKO |
| Model | 5108B Plus (The Degenerate 5108B Plus) |
| Keyboard Standard | 108 Keys (Full Size) |
| Operation Style | Mechanical |
| Switches | Akko V3 Piano Pro (Linear) |
| Switches Hot Swap | Yes |
| Keycap Material | PBT plastic |
| Keycap Printing | Dye-sublimation |
| Keycap Profile | ACA |
| Backlight Type | Multicolor (RGB) |
| Interface Type | USB, Bluetooth, Bluetooth / USB |
| Connection | 2.4G Wireless / Bluetooth / USB Type C |
| Polling Rate | 1000Hz (Wired & 2.4G), 125Hz (Bluetooth) |
| N-Key Rollover | Support |
| Disable Winlock | Support |
| Macro | Akko Macro V1.0 |
| Battery Included | Yes |
| Application | Desktop, Laptop |
| Operating Systems | Windows / macOS / iOS / Android |
| Language | English |
| Wrist Support | No |
| Certification | CE, WEEE |
| Origin | Mainland China |
Akko V3 Piano Pro Switch Specifications:
- Type: Linear
- Operating Force: 45 ± 5gf
- Total Travel: 3.1mm
- Pre-Travel: 1.9 ± 0.5mm
Diagram showing the dimensions of the Akko 5108B Plus keyboard.
Comparison of various keycap profiles, including the ACA profile used on this keyboard.
9. User Tips
- Experiment with Switches: Take advantage of the hot-swappable feature to try different switch types and find your preferred typing feel.
- Customize RGB: Explore the Akko software for advanced RGB customization options beyond the onboard controls to personalize your setup.
- Battery Management: For wireless use, remember to turn off the keyboard when not in use to conserve battery life.
10. Warranty and Support
For warranty information, technical support, or further assistance, please contact Akko Official Store customer service or visit the official Akko website. Keep your proof of purchase for warranty claims.
