intelamp YL005-16B

Contents

Intelamp High Power LED Solar Garden Light

Model: YL005-16B

Outdoor Waterproof IP65 Motion Sensor Spotlight Emergency Wall Lighting

1. Introduction

Thank you for choosing the Intelamp High Power LED Solar Garden Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your solar light. Please read this manual thoroughly before use and retain it for future reference.

2. Key Features

  • High-Brightness & Long Illumination: Equipped with a 12000mAh safety battery, fully charged in approximately 5 hours under intense sunlight, providing 3000LM brightness for extended periods.
  • Intelligent Mutual Control and Sensing: When one Intelamp solar light detects motion, it can trigger other Intelamp solar lights within a 20-meter (66ft) radius to illuminate, providing advanced pathway lighting.
  • Dual Sensing & Wide-Angle Illumination: Features two motion sensors for enhanced sensitivity and dual wide-angle light surfaces offering a 240° lighting angle.
  • Durable Design: Constructed with high-quality ABS body material and an acrylic lampshade. The solar panel's design helps reduce the lamp's internal temperature, extending battery and product lifespan.
  • IP65 Waterproof: Designed to withstand various outdoor weather conditions, ensuring reliable performance.

3. Technical Specifications

FeatureSpecification
Model NumberYL005-16B
Brand Nameintelamp
Power SourceSolar
Light SourceLED bulbs (5730*99 pieces)
Bulbs IncludedYes
Batteries IncludedYes
Solar Cell TypeLithium battery (3.2V/4000mAh lithium iron phosphate)
Protection LevelIP65
Body MaterialABS
Installation MethodSelf-contained
DimmableYes
CertificationsLVD, GS, FCC, UL, ROHS, CE
Product BrightnessInduction 1200 lumens
Charging TimeApprox. 5 hours (strong sunlight)
Lighting TimeLong periods in sensing mode
Induction AngleDual induction head 180° Sensor range
Solar Panel5V/800mA (single crystal silicon)
Product Dimensions (approx.)240mm (Length) x 126mm (Width) x 216mm (Solar Panel Length)
Package Dimensions (approx.)31 cm (L) x 15 cm (W) x 6 cm (H)
Package Weight (approx.)1.2 kg

4. Package Contents

Please check the package for the following items:

  • 1 x Intelamp Solar Garden Light Unit
  • 1 x Remote Control
  • Mounting Accessories (including ties, screws, and rubber stoppers)
Product dimensions and included accessories: solar light, remote control, ties, screws, rubber stopper.
Image: Product dimensions and included accessories.

5. Safety Information

  • Ensure the solar panel is clean and free from obstructions for optimal charging.
  • Do not attempt to disassemble or modify the product, as this may void the warranty and pose safety risks.
  • Keep the product away from open flames or extreme heat sources.
  • Dispose of batteries according to local regulations.
  • This product is designed for outdoor use and is IP65 waterproof, but avoid submerging it in water.

6. Installation

  1. Choose a Location: Select an outdoor location that receives direct sunlight for at least 5 hours daily to ensure efficient charging of the solar panel. The recommended installation height is between 2 to 5 meters.
  2. Mount the Light: Use the provided screws and ties to securely mount the solar light unit to a wall or pole. Ensure the mounting surface is stable.
  3. Adjust Solar Panel Angle: Adjust the angle of the solar panel to align it with the sun for maximum exposure and better charging efficiency. The solar panels are designed for a 20° bevel installation to ensure charging and help remove floating dust when it rains.
Diagram showing adjustable solar panel angle and recommended installation height of 2-5m.
Image: Efficient charging with adjustable solar panel and recommended installation height.
Diagram showing solar panel blocking direct sunlight from the lamp body to prevent overheating.
Image: Solar panel design for long life and temperature management.

7. Operating Modes

The Intelamp solar light offers multiple operating modes, controllable via the included remote control.

7.1. Remote Control Functions

Diagram of the remote control with buttons for On/Off, Induction Delay (30s, 60s, 120s), Long-lasting Timing (2h, 3h, 6h), Brightness Adjustment (60%, 80%, 100%), Sensing Mode, Long Light Mode, and Light Off.
Image: Smart remote control functions.
  • Turn On/Off: Power the light on or off.
  • Sensing Mode: Activates motion detection. The light will turn on brightly when motion is detected and dim or turn off after a set delay if no further motion.
  • Long Light Mode: The light remains on at a continuous brightness. Note: In this mode, if charging is insufficient (e.g., bad weather), brightness may be lower and lighting time shorter.
  • Induction Delay: Set the duration the light stays bright after motion is detected (30 seconds, 60 seconds, 120 seconds).
  • Long-lasting Timing: Set the light to operate for a specific duration after dark (2 hours, 3 hours, 6 hours).
  • Brightness Adjustment: Adjust the light output to 60%, 80%, or 100% brightness.

7.2. Intelligent Induction Linkage

The light features a dual probe sensor with a 180-degree sensing range. When a person approaches, the light will turn on in advance, and if multiple Intelamp lights are installed, they can communicate to illuminate your path up to 30 meters ahead.

Diagram illustrating the induction linkage feature where one light triggers nearby lights up to 30m in advance.
Image: Induction linkage functionality.
Comparison of Yinglang dual probe sensor (180 degrees) versus other single probe sensors (90 degrees).
Image: Large head sensing range comparison.
Comparison of Long Light Mode and Sensing Mode, highlighting advantages of sensing mode for battery life.
Image: Long light + induction linkage modes.

7.3. Product Demonstration Video

Video: Demonstration of the Intelamp solar light's features and operation, including motion sensing and illumination in various settings.

8. Maintenance

  • Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may hinder charging efficiency. Ensure the light sensor and LED surfaces are also clean.
  • Inspection: Periodically check the mounting for stability and ensure all connections are secure.
  • Winter Care: While designed for rainy days, prolonged periods of low sunlight in winter may affect performance. Ensure the solar panel is clear of snow or ice.

9. Troubleshooting

  • Light does not turn on at night:
    • Ensure the solar panel is receiving direct sunlight for at least 5 hours during the day.
    • Check if the light is in the correct operating mode (Sensing Mode or Long Light Mode) using the remote control.
    • Verify that the light sensor is not obstructed or exposed to other light sources at night.
  • Light is dim or short-lived:
    • The battery may not be fully charged. Ensure the solar panel is clean and positioned for maximum sun exposure.
    • Prolonged cloudy or rainy weather can reduce charging efficiency.
    • Adjust brightness settings using the remote control.
  • Motion sensor not working:
    • Ensure the light is in Sensing Mode.
    • Check if the sensor lens is clean and unobstructed.
    • Verify the sensing range and angle are appropriate for your needs.

10. Warranty and Support

This Intelamp solar light comes with a 2-year warranty, as indicated on the product packaging. For any issues or support needs, please contact your retailer or the manufacturer directly with your purchase details.

Main product image showing the solar light mounted on a wall, with text indicating '2 Years Warranty'.
Image: Product highlighting 2 Years Warranty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.