ATK X1 V2 Series Wireless Gaming Mouse User Manual

1. Introduction

The ATK X1 V2 Series Wireless Gaming Mouse is engineered for peak performance, offering an ultra-lightweight design, advanced sensors, and low-latency wireless connectivity. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your ATK X1 V2 mouse to ensure an optimal user experience.

The X1 V2 Series includes several versions: the Extreme Edition, Ultimate, and Ultra Max, each optimized for specific user needs while maintaining high standards of performance and durability.

2. Package Contents

Please check the contents of your mouse package. The items may vary slightly depending on the specific model (Ultimate/Extreme or Ultra Max).

2.1 X1V2 Ultimate/Extreme Packaging List:

• GEM 8K receiver
• 8K data cable
• Gray double-layer anti-dent PTFE foot patches (factory equipped)
• Same color anti-slip sticker
• User guide
• Warranty certificate
• Safety specification guide

2.2 X1V2 Ultra Max Packaging List:

• New NANO 8K receiver
• 8K data cable
• Same color anti-slip sticker
• Adapter
• User Guide
• Warranty Certificate
• Safety Specification Guide
• Gray double-layer anti-dent foot patches (equipped)

3. Setup

3.1 Connecting Your Mouse

1. Unpack the mouse and the 8K receiver from the box.
2. Plug the 8K receiver into an available USB port on your computer.
3. Turn on the mouse using the switch located on the underside of the mouse.
4. Your computer should automatically detect and install the necessary drivers for the mouse.

3.2 Charging the Mouse

To charge your ATK X1 V2 mouse, connect the provided 8K data cable to the mouse and to a USB power source (e.g., your computer's USB port or a USB wall adapter). Ensure you use the original data cable for optimal charging.

3.3 Software Installation (ATK HUB 3.0)

For advanced customization, including DPI settings, button remapping, and macro creation, download and install the ATK HUB 3.0 software from the official ATK website. This software provides a new, easier-to-use design for managing your ATK peripherals.

3.4 System Requirements for Optimal 8KHz Performance

To ensure optimal 8KHz usage experience with your ATK mouse, please confirm your computer meets the minimum recommended specifications below for best performance:

• CPU: Intel Core i7-9700K or above, AMD Ryzen 7 3700X or above
• Monitor: Refresh rate above 240Hz
• Graphics: NVIDIA GTX1080 or above, AMD RX5700 or above
• Memory: 16GB or more

4. Operating Instructions

4.1 Basic Mouse Functions

• Left Click: Primary action, selection.
• Right Click: Context menu, secondary action.
• Scroll Wheel: Scroll up/down, middle click for universal scroll or customizable function.
• Side Buttons: Customizable, often used for forward/back navigation or in-game actions.

4.2 DPI Adjustment

The mouse features an adjustable DPI range (100-30000DPI for PAW3395Ultra, 10-30000DPI overclockable up to 42000 DPI for PAW3950Ultra). Use the dedicated DPI button (if present) or the ATK HUB 3.0 software to cycle through or set your preferred DPI levels. The software allows for fine-tuning and saving multiple profiles.

4.3 Wired/Wireless Dual Mode

The ATK X1 V2 Series supports both wired and 2.4Ghz wireless connectivity. You can switch between modes using the switch on the underside of the mouse or by connecting the 8K data cable. Wired mode also allows for charging while in use.

4.4 Battery Life

The X1 V2 Ultra Max and Ultimate models offer over 800 hours of battery life (at 1000Hz polling rate), while the Extreme model provides 265+ hours (at 1000Hz polling rate). Battery status can typically be monitored via the ATK HUB 3.0 software or an indicator light on the mouse.

5. Maintenance

5.1 Cleaning

The ATK X1 V2 mouse features a brand new nano coating that is sweat-resistant, stain-resistant, and easy to clean. To clean your mouse:

• Use a soft, lint-free cloth, slightly dampened with water or a mild cleaning solution.
• Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the coating and internal components.
• Gently wipe the surface of the mouse. For crevices, use a dry cotton swab or compressed air.

5.2 Foot Pads

The mouse is equipped with high-content PTFE or standard gray double-layer anti-sink foot pads, designed for smooth gliding and durability. If the foot pads show significant wear, replacement sets may be available from ATK support or authorized retailers.

5.3 Battery Care

To prolong battery life, avoid fully discharging the mouse frequently. Charge the mouse when the battery indicator suggests low power. Store the mouse in a cool, dry place when not in use for extended periods.

6. Troubleshooting

6.1 Mouse Not Responding

• Ensure the mouse is turned on.
• Check battery level and charge if necessary.
• Verify the 8K receiver is securely plugged into a working USB port.
• Try plugging the receiver into a different USB port.
• If using wireless, try connecting the mouse via the 8K data cable to rule out wireless interference or receiver issues.
• Restart your computer.

6.2 Unstable 8KHz Polling Rate or Frame Drops

If you experience instability or frame drops at 8KHz polling rate, ensure your system meets the recommended specifications outlined in Section 3.4. High polling rates demand significant system resources. Lowering the polling rate in the ATK HUB 3.0 software may resolve the issue if your system is underperforming.

6.3 DPI or Button Settings Not Working

• Ensure the ATK HUB 3.0 software is installed and running.
• Check if the mouse profile in the software is active.
• Update the mouse firmware via the ATK HUB 3.0 software if an update is available.

7. Specifications

The ATK X1 V2 Series offers different models with varying specifications to cater to diverse user preferences. Below is a detailed parameter table:

7.1 Sensor Comparison

8. User Tips

• Software Updates: Regularly check for updates to the ATK HUB 3.0 software and mouse firmware to ensure optimal performance and access to new features.
• Polling Rate Optimization: While 8KHz offers the lowest latency, consider using 1000Hz for general use or if your system doesn't meet the recommended specifications, as it still provides excellent performance with less system strain.
• Surface Compatibility: For best tracking performance, use your mouse on a high-quality mouse pad.
• Customization: Explore the ATK HUB 3.0 software to customize DPI stages, button assignments, and macros to suit your specific gaming or work needs.

9. Warranty and Support

Your ATK X1 V2 Series Wireless Gaming Mouse comes with a manufacturer's warranty. Please refer to the warranty certificate included in your package for specific terms and conditions, including warranty duration and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please visit the official ATK website or contact their customer service. Keep your proof of purchase handy when seeking support.