NEEWER TP63/TP64

Contents

NEEWER TP63/TP64 Overhead Tripod & Horizontal Monopod Combo Instruction Manual

Model: TP63 / TP64

Brand: NEEWER

1. Introduction

Thank you for choosing the NEEWER TP63/TP64 Overhead Tripod & Horizontal Monopod Combo. This versatile photography accessory is designed to provide stable support and flexible positioning for your camera equipment, whether you need a sturdy tripod, an overhead shooting solution, or a portable monopod. This manual will guide you through the setup, operation, and maintenance of your new equipment to ensure optimal performance and longevity.

2. Safety Information

  • Always ensure all locking mechanisms are securely tightened before mounting any equipment or adjusting the tripod/monopod.
  • Do not exceed the maximum load capacity of 13.2 lbs (6 kg) to prevent damage to the equipment and potential injury.
  • Keep the product away from children to avoid accidents.
  • Avoid using the product in extreme weather conditions or environments that could damage the metal alloy components.
  • Handle with care to prevent drops or impacts that could affect stability and functionality.

3. Package Contents

Please check the package to ensure all items are present:

  • 1 x Camera Tripod Monopod (TP63 or TP64 model)
  • 1 x L Shaped Hex Key
  • 1 x Carrying Bag

4. Product Overview

The NEEWER TP63/TP64 is a robust and adaptable camera support system. It features a durable metal alloy construction, a flexible center column for diverse shooting angles, and the ability to transform into a monopod. The tripod comes with either a ball head (TP63) or a fluid head (TP64), both equipped with an Arca-type quick release plate for easy camera attachment.

NEEWER TP63/TP64 Overhead Tripod and Monopod Combo with flexible center column and detachable monopod.
The NEEWER TP63/TP64 features a main tripod, a detachable monopod, and a flexible center column for versatile shooting.

5. Setup Instructions

5.1 Unfolding the Tripod and Adjusting Height

  1. Release the leg locks on each tripod leg.
  2. Extend the legs to your desired height. The tripod can be adjusted from 25.2 inches (64 cm) to 65 inches (165 cm).
  3. Adjust the leg angles using the angle adjustment buttons located at the top of each leg. There are three adjustable leg angles for different stability requirements.
  4. Securely fasten all leg locks.
  5. To extend the center column for additional height (up to 90.6 inches / 230 cm), loosen the center column locking knob, raise the column, and then tighten the knob firmly.
Diagram showing the NEEWER TP63/TP64 tripod's adjustable height from 25.2 inches (64 cm) to 90.6 inches (230 cm) and its compact folded size of 21 inches (53 cm).
The tripod legs can be adjusted to various heights and fold reversibly for compact storage. Non-slip rubber feet provide stability.

5.2 Attaching Your Camera

  1. Locate the Arca-type quick release plate on the tripod head.
  2. Unscrew the 1/4" screw on the quick release plate and attach it to the bottom of your camera. Ensure it is tightly secured.
  3. Slide the quick release plate with your camera into the tripod head's clamp.
  4. Tighten the quick release plate locking knob to secure your camera firmly in place.
Detailed view of the NEEWER TP63 ball head with bubble level, 360° panorama base, quick release plate locking knob, ball head locking knob, and base locking knob.
The ball head features a quick release plate for easy camera attachment, a bubble level for precise leveling, and multiple locking knobs for secure positioning.

6. Operating Instructions

6.1 Flexible Center Column for Overhead and Low-Angle Shots

The flexible center column allows for versatile shooting angles, including overhead and low-angle photography.

  1. To adjust the center column horizontally, loosen the center column locking knob.
  2. Tilt the center column to the desired horizontal position (up to 180° vertical tilt) or rotate it (360° horizontal rotation).
  3. Tighten the center column locking knob firmly to secure the position.
  4. For low-angle shooting, the center column can be inverted. Consult the diagram for visual guidance.
Diagram illustrating the flexible center column of the NEEWER TP63/TP64 tripod, showing 360° horizontal rotation and 180° vertical tilt for flexible shooting angles.
Adjust the center axis for flexible shooting, including 360° horizontal rotation and 180° vertical tilt.

6.2 Transforming into a Monopod

One of the tripod legs can be detached and used as a monopod for increased portability and flexibility in tight spaces.

  1. Identify the tripod leg with the foam grip.
  2. Unscrew this leg from the tripod base.
  3. Detach the tripod head from the main center column and screw it onto the top of the detached leg.
  4. Extend the monopod to your desired height. The monopod is adjustable from 22.2 inches (56.5 cm) to 65.4 inches (166 cm) and up to 94.5 inches (240 cm).
  5. Ensure all sections are locked securely.
Illustration showing one leg of the NEEWER TP63/TP64 tripod detaching to form a monopod, with examples of its use for outdoor photography.
One tripod leg can be detached and combined with the tripod head to form a monopod, adjustable from 22.2 inches (56.5 cm) to 65.4 inches (166 cm) and 94.5 inches (240 cm).

6.3 Multi-Angle Shooting

The tripod offers multiple leg angles and an invertible center column for diverse shooting scenarios.

  1. Press the angle adjustment button on each leg to select one of the three available angles (e.g., 20-21°, 51-52°, 81-82°).
  2. For extremely low-angle shots, the center column can be inverted. Loosen the center column locking knob, remove the column, invert it, and reinsert it, then tighten the knob.
Diagram showing the NEEWER TP63/TP64 tripod's multi-angle shooting capabilities with adjustable leg angles (20-21°, 51-52°, 81-82°) and an inverted center column for low-angle shots.
The tripod supports various shooting angles with three adjustable leg angles and an invertible center column for low-angle photography.

6.4 Ball Head (TP63) / Fluid Head (TP64) Operation

Both the ball head (TP63) and fluid head (TP64) provide precise control over camera positioning.

  • Panning: Loosen the base locking knob to rotate the camera 360° on the scaled pan base. Tighten to lock.
  • Tilting: Loosen the ball head locking knob (TP63) or tilt locking knob (TP64) to tilt the camera from +90° to -90°. Tighten to lock.
  • Leveling: Use the integrated bubble level to ensure your camera is perfectly level for panoramic shots.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to wipe down the tripod and monopod after each use. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
  • Storage: Store the equipment in its carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Regular Checks: Periodically check all screws, knobs, and leg locks to ensure they are tight and functioning correctly. If any part feels loose, use the provided L-shaped hex key to tighten it.
  • Lubrication: Do not attempt to lubricate any moving parts unless specifically instructed by the manufacturer, as this could attract dust and debris.

8. Troubleshooting

  • Stability Issues: If the tripod feels unstable, ensure all leg locks are fully engaged and the legs are spread to an appropriate angle. Verify that the load capacity is not exceeded.
  • Stiff Head Movement: If the ball head or fluid head movement is stiff, check that the corresponding locking knobs are not overtightened. Loosen them slightly to allow for smoother movement.
  • Camera Not Secure: Ensure the quick release plate is properly attached to your camera and fully seated in the tripod head's clamp, with the locking knob tightened.

9. Specifications

FeatureTP63 (with Ball Head)TP64 (with Fluid Head)
Item TypeCamera Tripod Monopod
Main FeaturesFlexible Center Column
Mounting Points1/4", Arca Type
Main MaterialMetal Alloy
Load Capacity13.2 lbs (6 kg)
Height (Tripod)25.2" (64 cm) to 90.6" (230 cm)24.6" (62.5 cm) to 89.9" (228.5 cm)
Height (Monopod)22.2" (56.5 cm), 65.4" (166 cm), 94.5" (240 cm)Not specified separately, generally similar to tripod leg range.
Weight4.1 lbs / 1860g4 lbs / 1835g

10. User Tips

  • Always double-check all locking mechanisms before mounting expensive camera equipment to prevent accidental drops.
  • Experiment with the flexible center column for unique overhead shots, product photography, or creative low-angle perspectives.
  • The monopod feature is ideal for situations requiring quick setup and mobility, such as event photography or hiking.
  • Utilize the bubble level on the tripod head to ensure perfectly straight horizons in your landscape and architectural shots.

11. Warranty and Support

For warranty information, technical support, or any questions regarding your NEEWER TP63/TP64 tripod and monopod combo, please refer to the official NEEWER website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.