1. Introduction
Thank you for choosing the FDIK S3 4000W Pure Sine Wave Inverter. This device is designed to convert DC power from a battery into AC power, suitable for powering various electronic devices and appliances. It features a pure sine wave output, ensuring compatibility with sensitive electronics, and a smart digital display for real-time monitoring. This manual provides essential information for the safe and efficient operation of your inverter.
Note: The inverter is available in 12V and 24V input voltage models. These different input voltages are not universal. Please ensure you have purchased the correct model for your application.
2. Safety Information
Please read and understand all safety instructions before installing and operating the inverter. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure proper ventilation around the inverter to prevent overheating.
- Do not expose the inverter to water, rain, snow, or spray.
- Do not operate the inverter if it has been damaged in any way.
- Keep children away from the inverter.
- Connect the inverter only to a battery with the correct voltage (12V or 24V) as specified for your model.
- Always disconnect the battery before performing any maintenance or cleaning.
- This inverter is CE certified, indicating compliance with European safety standards.
Built-in Safety Protections:
The FDIK S3 inverter incorporates multiple safety features to protect both the device and connected appliances:
- Overload Protection: Shuts down if connected load exceeds rated capacity.
- Output Short Circuit Protection: Protects against short circuits at the AC output.
- Over Current Protection: Prevents damage from excessive current draw.
- Under Voltage Protection: Shuts down to prevent battery over-discharge.

3. Package Contents
Please check the package contents upon receipt. If anything is missing or damaged, contact your seller immediately.
- FDIK S3 Pure Sine Wave Inverter (12V or 24V model)
- Battery connection cables (red for positive, black for negative)
- User Manual
4. Product Overview
The FDIK S3 inverter is designed for reliability and ease of use, featuring a robust construction and a clear digital display.

Key Features:
- Pure Sine Wave Output: Provides clean power, identical to grid power, safe for all electronics.
- Smart Digital Display: Real-time monitoring of input voltage, output voltage, wattage, frequency, and battery level.
- Efficient Cooling System: Equipped with smart fans that operate quietly (<60dB) and efficiently to maintain optimal performance.
- Durable Construction: Features pure copper terminals for reliable connections and a white, simple aesthetic.
- High Conversion Rate: Self-developed chip brings a higher conversion rate of 93%.
- Quality Accessories: Includes copper wire cables designed to carry sufficient current without overheating.





5. Setup
Choosing the Right Battery:
The performance of your inverter is directly affected by the capacity and type of your battery. It is crucial to select a suitable battery to ensure the maximum output power of the inverter.
- Battery Voltage: Ensure your battery voltage matches your inverter model (12V or 24V).
- Battery Capacity: The maximum output power of the inverter is limited by the battery's ability to supply current.
Calculation for Maximum Battery Output Power:
- Maximum battery output power = U (battery voltage) * I (battery capacity) * 0.72
Calculation for Required Battery Capacity:
- Battery capacity = Inverter maximum output power / (U (battery voltage) * 0.72)
If you do not have a battery, use the table below to determine the appropriate battery capacity for your desired inverter output power:
| Battery Capacity | 12V Maximum Battery Output Power | Battery Capacity | 24V Maximum Battery Output Power |
|---|---|---|---|
| 70AH | 604W | 70AH | 1209.6W |
| 100AH | 864W | 100AH | 1728W |
| 150AH | 1296W | 150AH | 2592W |
Compatible Battery Types:
The FDIK S3 inverter is adaptable to various battery types, including:
- LI (Lithium-ion)
- SLD (Sealed Lead-Acid)
- GEL (Gel Cell)
- FLD (Flooded Lead-Acid)
- AGM (Absorbed Glass Mat)

Wiring Diagram (Solar System Example):
The inverter can be integrated into various power systems, including solar setups. Below is a typical wiring diagram for a solar system:

Wiring Steps:
- Connect solar panels to a charge controller.
- Connect the charge controller to the battery.
- Connect the inverter's DC input terminals (red for positive, black for negative) to the corresponding terminals on the battery. Ensure a secure connection.
- Plug your AC appliances into the inverter's AC output socket.
Always ensure all connections are tight and correctly polarized before turning on the inverter.
6. Operating Instructions
- Connect to Battery: Ensure the inverter is securely connected to a compatible 12V or 24V battery using the provided cables.
- Turn On: Flip the ON/OFF switch on the inverter to the 'ON' position. The digital display will illuminate.
- Monitor Display: Observe the smart digital display for real-time information on input voltage (DC), output voltage (AC), current wattage being drawn, frequency (50Hz), and battery level.
- Connect Appliances: Plug your AC appliances into the European standard AC output socket on the inverter. Ensure the total wattage of connected appliances does not exceed the inverter's rated power (2000W continuous, 4000W peak).
- Turn Off: When finished, first disconnect all AC appliances, then flip the ON/OFF switch to the 'OFF' position.
7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your inverter.
- Cleaning: Periodically clean the exterior of the inverter with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Ventilation: Ensure the cooling fans and vents are free from dust and obstructions. Blocked vents can lead to overheating.
- Connections: Regularly check battery cable connections to ensure they are tight and free from corrosion. Loose connections can cause power loss and overheating.
- Storage: If storing the inverter for an extended period, disconnect it from the battery and store it in a cool, dry place.
8. Troubleshooting
If you encounter issues with your inverter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Inverter does not turn on | Loose battery connections, low battery voltage, faulty ON/OFF switch. | Check battery cable connections. Recharge or replace battery. Ensure switch is fully 'ON'. |
| No AC output | Overload, short circuit, low battery voltage, inverter protection activated. | Reduce load. Check for short circuits in appliances/wiring. Recharge battery. Turn inverter off and on to reset protections. |
| Overheating | Blocked ventilation, excessive load, high ambient temperature. | Clear vents. Reduce load. Move inverter to a cooler, well-ventilated area. |
| Abnormal noise | Cooling fan issue, loose internal components. | Check if fan is obstructed. If noise persists, contact support. |
9. Specifications
| Feature | Specification |
|---|---|
| Model | S3 |
| Rated Power | 2000W |
| Peak Power | 4000W |
| Input Voltage | 12V DC or 24V DC (model dependent) |
| Output Voltage | 220V AC |
| Output Frequency | 50Hz |
| Output Waveform | Pure Sine Wave |
| Conversion Rate | 93% |
| Cooling | Smart Fan System (<60dB) |
| Dimensions (4000W) | 300mm x 173mm x 87mm |
| Type | DC/AC Inverter |
| Certification | CE |
10. User Tips
- Verify CE Certification: The FDIK S3 inverter is CE certified, ensuring it meets European safety, health, and environmental protection standards. This is an important consideration for safety and compliance.
- Match Voltage Carefully: Always double-check that the inverter's input voltage (12V or 24V) matches your battery system. Using the wrong voltage can damage both the inverter and the battery.
- Consider Peak Power: While the rated power is 2000W, the inverter can handle peak loads up to 4000W. This is useful for appliances with high startup currents, but continuous operation should remain within the rated power.
11. Warranty and Support
The FDIK S3 Pure Sine Wave Inverter comes with a Two-Year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or any questions regarding your FDIK inverter, please contact the FDIK INTL Store directly through your purchase platform.