1. Introduction
The ElecDemo AD9851 High-Speed DDS Module is a highly integrated device utilizing advanced Direct Digital Synthesis (DDS) technology. It combines an internal high-speed, high-performance Digital-to-Analog (D/A) converter and comparator to function as a digitally programmable frequency synthesizer and clock generator. When referenced to an accurate clock source, the AD9851 generates stable, phase-programmable digital analog output sine waves. These sine waves can be directly used as a frequency source or internally converted into square waves for agile clock generation applications.
The module's high-speed DDS core accepts 32-bit frequency tuning words, enabling an output tuning resolution of approximately 0.04 Hz when operating with a 180 MHz system clock. It features a unique 6x REFCLK multiplier circuit, eliminating the need for a high-speed reference oscillator and minimizing effects on SFDR and phase noise characteristics.

1.1 Package Contents
- AD9851 Module
- PDF schematic diagram (available upon request)
- Routine source code (available upon request)
- After-sale technical support
- Electrostatic bag packaging
- Shockproof foam
2. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ElecDemo |
| Module Model | AD9851 |
| Module Type | Digital Synthesis Frequency Source |
| Origin | Mainland China |
| Supply Voltage | DC-5V (Max 5.2V) |
| Module Current | 70mA (MAX); 65mA (TYP) |
| Communication Protocol | SPI serial or parallel |
| Routine Support | STM32F103RCT6 (KEIL5 version source code) |
| System Main Frequency | 180MHz (MAX) |
| DAC Resolution | 10 bits |
| Phase Accumulator Bits | 32 bits |
| Output Interface | SMA; 24-hour salt spray anti-oxidation |
| Output Signals | Sine wave (with 65MHz low-pass filter), Square wave (coupling output) |
| Output Channels | 2 differential channels (180-degree phase difference) |
| Sine Wave Frequency Range | 1Hz - 65MHz |
| Square Wave Frequency Range | 1Hz - 30MHz |
| Output Amplitude (Sine Wave) | 340mVpp (MAX) (decreases with increasing frequency) |
| Output Amplitude (Square Wave) | 5Vpp (changes with increasing frequency) |
| Output Impedance | 75 ohms |
| Module Weight | 30g |
| Dimensions (L x W x H) | 70mm x 50mm x 12mm (PCB size) |
| Interface Types | SMA signal output, external clock input, DC5.5 power socket, XH2.54-14PIN double-row pin data interface |

3. Setup and Connections
3.1 Power Supply
- The module requires a DC-5V power supply. Do not exceed 5.2V to prevent damage.
- For optimal performance and to avoid unnecessary interference, it is recommended to use a linear power supply.
- Power is supplied via the DC5.5 power socket.
3.2 Signal and Data Interfaces
- Signal Output: The module provides SMA output interfaces for sine wave (OUT1, OUT2) and square wave (OUT3).
- External Clock Input: An external clock can be connected via the dedicated input.
- Data Interface: The XH2.54-14PIN double-row pin data interface is used for communication and control (SPI serial or parallel).

3.3 Microcontroller Connection (STM32 Example)
For controlling the AD9851 module with an STM32 microcontroller, refer to the pin mapping below. The provided routines are compatible with STM32F103RCT6 on a KEIL5 platform.

3.4 Initial Testing
If using a control board for testing, ensure the following sequence:
- Supply power to the AD9851 DDS module first.
- Then, supply power to the control board.
- Generate a waveform using the control board.
- Long press the middle button on the control board to switch functions.
4. Operation
4.1 Signal Generation
- Sine Wave: The module can generate sine waves in the range of 1Hz to 65MHz. The output amplitude is fixed at 340mVpp (MAX) but will decrease with increasing frequency.
- Square Wave: Square waves can be generated from 1Hz to 30MHz. The output amplitude is 5Vpp, and the waveform may change with increasing frequency. The square wave duty cycle is adjustable.
- Differential Output: The module provides two differential output channels with a fixed 180-degree phase difference. Note that at higher frequencies, phase shift may occur due to the internal filter.
4.2 Frequency Tuning and Control
- The AD9851 uses 32-bit frequency tuning words, allowing for precise frequency control with a resolution of approximately 0.04 Hz at a 180 MHz system clock.
- The module supports frequency sweep functionality, which can be implemented using the provided program code.
- The default code generates a point frequency signal. For other modes or advanced modulation, custom programming is required.
4.3 Observing Output Signals
- When connecting to RF equipment, note that the sine wave output has its own DC component. It is recommended to add a DC blocker or use an oscilloscope for direct measurement.
- For observing the output signal, use a high-quality SMA to BNC cable. Poor contact or low-quality wires can lead to signal attenuation or excessive noise.

5. Maintenance
- Keep the module clean and dry. Avoid exposure to dust, moisture, or extreme temperatures.
- Handle the module with care, as it contains high-precision electronic components.
- Ensure proper ventilation if integrating into an enclosure to prevent overheating.
6. Troubleshooting
- Q: What is the main frequency of the module? Can the output amplitude be adjusted?
- A: The module's main frequency is determined by the input clock (default 30MHz) and the program (which applies a 6x multiplier, resulting in a default frequency of 180MHz). The output amplitude is fixed and cannot be programmed or adjusted.
- Q: Can the module achieve frequency sweep? Is the square wave duty cycle adjustable?
- A: Yes, the module can perform frequency sweeps, and the provided code supports this functionality. The square wave duty cycle is adjustable.
- Q: Can the two channels be adjusted independently? Can it be modulated?
- A: The two output channels have a fixed 180-degree phase difference. At higher frequencies, phase shift may occur due to the internal filter, and the channels cannot be adjusted independently. The default code provides a point frequency signal; implementing other modes or modulation requires custom programming.
- Q: Why is the output signal attenuated or noisy?
- A: Ensure you are using a high-quality SMA to BNC cable for signal observation. Poor contact or low-quality wires can introduce signal attenuation or excessive noise.
7. User Tips
- Electronic Expertise: Operation of this module requires a certain level of electronic expertise, especially concerning wiring. Please ensure you are comfortable with such tasks.
- Documentation Review: Always refer to the module's schematic diagram and detailed specifications (available in the provided PDF manual) for functional verification and understanding power supply/use restrictions.
- Code Development: The delivered code is only for the supporting main control board and does not provide a microcontroller tutorial. Additional functions need to be developed by yourself.
- Initial Testing: If using a control board for testing, power the DDS module first, then the control board. Long press the middle button to switch functions.
A user manual in PDF format is available for download: AD9851 Module User Manual (PDF)
8. Warranty and Support
8.1 Limited Warranty
ElecDemo provides a manufacturer's limited warranty on defective items. This warranty does not cover items damaged or misused after receipt. Accessories are typically backed by a 3-month warranty. Any defective items must be reported and returned within the warranty period, preferably in their original packaging.
8.2 Technical Support
For technical assistance, operational problems, or to request the PDF schematic diagram and routine source code, please contact ElecDemo customer service. All modules are tested before shipment to ensure they meet specified parameters and functions.