Bykski N-RTXPRO6000-WS-SR

Contents
Bykski Logo

Bykski N-RTXPRO6000-WS-SR GPU Water Block User Manual

For NVIDIA RTX Pro 6000 Blackwell Workstation Edition Cards

1. Product Overview

The Bykski N-RTXPRO6000-WS-SR is an all-metal copper radiator GPU water block designed for high-performance liquid cooling of NVIDIA RTX Pro 6000 Blackwell Workstation Edition graphics cards. It features a full-coverage design to cool the GPU core, memory, and VRM components, ensuring optimal thermal performance and stability.

Bykski N-RTXPRO6000-WS-SR GPU Water Block

Figure 1.1: Bykski N-RTXPRO6000-WS-SR GPU Water Block (Top View)

Bykski N-RTXPRO6000-WS-SR GPU Water Block Angled View

Figure 1.2: Bykski N-RTXPRO6000-WS-SR GPU Water Block (Angled View)

2. Package Contents

Please inspect the package contents upon receipt. If any items are missing or damaged, contact your retailer.

List of Installation Parts for Bykski GPU Water Block

Figure 2.1: List of Installation Parts

List of Installation Parts:

Item Description Quantity
① N-RTXPRO6000-WS-SR Water Block 1 PCS
② 1.5 MM Grease (Thermal Paste) 5 PCS
③ PCB (Thermal Pads) 1 PCS
④ 0.5 MM Spacer 4 PCS
⑤ M2*5MM Spring Screw 4 PCS
⑥ Water Cooling Backplate 1 PCS
⑦ Backplate Screws 4 PCS
⑧ PCB Golden Finger 1 PCS
⑨ Original GPU Bracket 1 PCS
⑩ M2*5 MM Cross Flat Screw 8 PCS
⑪ M1.5*4 MM Cross Flat Screw 2 PCS
⑫ Backplane 2 PCS
⑬ M2*3 MM Flat Head Screw 8 PCS
⑭ PCI-E Baffle 1 PCS
⑮ M3*5 MM Flat Head Screw 3 PCS

3. Installation Guide

This section provides detailed instructions for installing the Bykski N-RTXPRO6000-WS-SR GPU Water Block. Please follow these steps carefully to ensure proper installation and avoid damage to your components.

3.1 Compatibility Check

Ensure your graphics card is an NVIDIA RTX Pro 6000 Blackwell Workstation Edition. Compatibility is based on the reference design. The block may not fit altered, super-clocked, or other third-party variations that deviate from the reference design. Stock backplates are not guaranteed to fit due to mounting variances.

NVIDIA RTX 6000 PCB schematic and compatibility table for water cooling

Figure 3.1: GeForce RTX 6000 PCB Schematic and Water Cooling Compatibility Platform

3.2 Preparation

  1. Power off your computer and disconnect all cables.
  2. Remove your graphics card from the PCI-E slot.
  3. Carefully remove the stock cooler from your graphics card. Refer to your GPU's manufacturer instructions for this step.
  4. Clean any residual thermal paste or thermal pads from the GPU die, memory chips, and VRM components using isopropyl alcohol.

3.3 Water Block Installation Steps

Installation steps diagram, showing thermal paste application and screw tightening sequence

Figure 3.2: Product Installation Diagram

  1. Apply Thermal Paste and Thermal Pads (Before Applying):
    • Apply an appropriate amount of thermal paste to the GPU die.
    • Cut the thermal pads to the correct size and place them on the memory chips and VRM components as indicated in the diagram.
  2. Secure the Water Block and Backplate (After Applying):
    • Align the water block with the GPU and gently place it onto the PCB. Ensure the screw holes align.
    • Install the backplate from the back of the motherboard. Align it with the screw holes.
    • Insert the spring screws (⑤) into the corresponding holes on the water block.
    • Tighten the screws in a diagonal pattern to ensure even pressure. Do not overtighten.
    • For the backplate, use the backplate screws (⑦) to secure it.
    • If you encounter any difficulties, contact technical support to avoid damaging the PCB.
  3. Final Assembly (Refer to Figure 3.3 - 3.6 for visual guidance):
    • Attach the original GPU bracket (⑨) if applicable.
    • Secure any remaining components using the provided screws (⑩, ⑪, ⑬, ⑮).
    • Install the PCI-E baffle (⑭).
Installation diagram 1-2, showing components assembled

Figure 3.3: Installation Diagram 1-2

Installation diagram 1-3, showing components assembled

Figure 3.4: Installation Diagram 1-3

Installation diagram 1-4, showing components assembled

Figure 3.5: Installation Diagram 1-4

Installation diagram 1-5, showing components assembled

Figure 3.6: Installation Diagram 1-5

4. Operating Principles

The Bykski GPU water block is designed for efficient heat dissipation through advanced fluid dynamics and material science.

4.1 Thermal Conductivity (Part 1)

Thermal conductivity plays a crucial role in heat transfer, determining a material's ability to conduct heat. Higher thermal conductivity means faster heat transfer. The water block utilizes high-purity copper, known for its excellent thermal conductivity.

Detailed view of the water block's internal structure, highlighting 0.3mm micro-channels for efficient heat transfer

Figure 4.1: Water Block Internal Structure with 0.3mm Micro-channels

The water block features a 0.3mm micro-channel design, increasing the heat absorption area and enhancing heat dissipation performance. It boasts up to 56 water channels, increasing the water channel area to 15565.2954 mm².

4.2 Thermal Resistance (Part 2)

Thermal resistance is the opposition to heat flow. Optimizing thermal resistance improves heat transfer efficiency. The total thermal resistance (R) is the sum of case-to-sink resistance (Rcs) and sink-to-ambient resistance (Rsa).

Thermal resistance model diagram (Rcs, Rsa) for the water block

Figure 4.2: Bykski Water Block Thermal Model

4.3 Convective Heat Transfer (Part 3)

Convective heat transfer is the process of heat transfer through fluid motion. When an object comes into contact with a fluid, the fluid transfers heat away from the object through natural and forced convection. Strong convection leads to higher heat transfer rates.

Diagram explaining heat transfer coefficients (Convective, Nusselt, Reynolds, Prandtl numbers)

Figure 4.3: Convective Heat Transfer Principles

The water block's design promotes efficient fluid flow, minimizing flow resistance and maximizing heat exchange. The internal water channels are optimized to reduce turbulence and improve the mixing of fluid with the copper cold plate, thereby enhancing heat transfer efficiency.

Diagram of the water block's internal structure and dimensions, emphasizing the 0.35mm copper base thickness

Figure 4.4: Water Block Internal Structure and Dimensions

The water block features a thin 0.35mm copper base thickness, which helps reduce thermal resistance and improve heat transfer efficiency while maintaining structural integrity under installation pressure.

4.4 Water Flow and Resistance

Understanding the water flow and resistance characteristics is crucial for optimizing your liquid cooling loop. The water block is designed to provide efficient flow with minimal resistance.

Water block flow resistance (PQ curve) diagram

Figure 4.5: Water Block Flow Resistance PQ Curve

The PQ curve illustrates the relationship between flow rate (L/min) and flow resistance (Pa) through the water block. This data helps in selecting appropriate pumps for your cooling system.

Internal water flow path diagram within the water block, showing fluid dynamics

Figure 4.6: Water Flow Direction Display

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your water cooling system.

  • Fluid Replacement: It is recommended to replace the cooling fluid every 6-12 months, depending on the fluid type and usage.
  • System Flush: Periodically flush your entire cooling loop to remove any accumulated debris or contaminants.
  • Block Inspection: Visually inspect the water block for any signs of corrosion or buildup. If necessary, disassemble and clean the internal micro-channels with a soft brush and distilled water.
  • Leak Check: Always perform a leak test after any maintenance or component changes before powering on your system.

6. Troubleshooting

If you encounter issues with your water block, consider the following common troubleshooting steps:

  • Poor Cooling Performance:
    • Check for proper thermal paste application and contact between the GPU die and water block.
    • Ensure thermal pads are correctly placed and making good contact with memory and VRM components.
    • Verify that the pump is functioning correctly and fluid is circulating.
    • Inspect for air bubbles trapped in the loop, especially in the water block. Tilt your system to help dislodge them.
    • Check for blockages in the cooling loop or radiator.
  • Leaks:
    • Immediately power off your system if a leak is detected.
    • Tighten all fittings, ensuring they are snug but not overtightened.
    • Inspect O-rings for damage or improper seating.
    • Perform a thorough leak test with paper towels placed around components before powering on.
  • No Flow:
    • Ensure the pump is powered and connected correctly.
    • Check for kinks in tubing that might restrict flow.
    • Verify that the reservoir has sufficient fluid.

7. Specifications

Feature Detail
Model Number N-RTXPRO6000-WS-SR
Brand Name Bykski
Type VGA Front Water Block
Compatible GPU NVIDIA RTX Pro 6000 Blackwell Workstation Edition
Material Electroplated High Purity Copper / 304 Stainless Steel
Heatsink Material Copper
RGB Support NO RGB
Thermal Pads Included
Screw Thread G 1/4' internal thread
Fittings 2pcs Plug
Net Weight 1.5 Kg
Working Pressure Max 2 bar
Working Temperature -20 to 60°C
Fluid Type Compatibility Water, Ethylene Glycol, Propylene Glycol, Fluorinated Fluid, Mineral Oil
Convective Heat Transfer Method Jet
Seal Material EPDM

8. Warranty and Support

The Bykski N-RTXPRO6000-WS-SR GPU Water Block comes with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use.

For technical support, installation queries, or warranty claims, please visit the official Bykski website at www.bykski.com.

A detailed user manual in PDF format is also available for download: Download User Manual (PDF).

9. User Tips

  • Pre-assembly Check: Before starting installation, lay out all components and compare them against the parts list to ensure everything is present.
  • Thermal Paste Application: Apply a thin, even layer of thermal paste to the GPU die. Too much or too little can negatively impact cooling performance.
  • Screw Tightening: Always tighten screws in a diagonal pattern to ensure even pressure distribution and prevent warping of the PCB or water block. Tighten until snug, but avoid excessive force.
  • Leak Testing: After installation, always perform a leak test for at least 24 hours with only the pump running (and no power to other components) to ensure there are no leaks before powering on your entire system.
  • Fluid Quality: Use high-quality, purpose-built coolant for PC liquid cooling systems. Avoid using tap water or automotive coolants, as they can cause corrosion or blockages.

© 2024 Bykski. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.