Dahao PC2220

Contents

Dahao PC2220B/PC2220C Control Board Instruction Manual

For Chinese Embroidery Machines with Dahao Control System

1. Product Overview

This manual provides essential information for the Dahao PC2220B and PC2220C control boards, which are electronic parts designed for use in Chinese embroidery machines equipped with the Dahao control system. The PC2220B and PC2220C models are compatible and serve as critical components for the machine's operation.

The control board is constructed from plastic and metal, ensuring durability and proper electronic function within the embroidery machine environment.

2. Installation and Compatibility

2.1. Compatibility Check

Before attempting installation, it is crucial to verify the compatibility of this control board with your specific embroidery machine. Manufacturers sometimes use similar components across different machine series. Always compare the part number (P/N PC2220B or PC2220C) and visual appearance with your existing board.

If you are unsure about compatibility, it is highly recommended to contact the seller or a qualified technician for assistance before proceeding with a purchase or installation.

2.2. Visual Identification

Refer to the images below for visual identification of the PC2220B and PC2220C control boards. These images can help you confirm that you have the correct part for your machine.

Dahao PC2220B Control Board (Front View)

Figure 1: Dahao PC2220B Control Board (Front View)

Dahao PC2220C Control Board (Front View)

Figure 2: Dahao PC2220C Control Board (Front View)

2.3. Installation Procedure (General Guidance)

Installation of this electronic component should only be performed by individuals with appropriate technical knowledge and experience in handling electronic parts for industrial machinery. Incorrect installation can lead to damage to the board or the embroidery machine.

  1. Power Off: Ensure the embroidery machine is completely powered off and disconnected from the main power supply before beginning any work.
  2. Access: Carefully open the machine's control panel or housing to access the existing control board.
  3. Disconnection: Document or photograph all existing cable connections to the old board. Gently disconnect all cables and fasteners.
  4. Removal: Remove the old control board.
  5. Placement: Install the new Dahao PC2220B/PC2220C board in the same position as the old one.
  6. Connection: Reconnect all cables and fasteners, ensuring they are securely attached according to your documentation.
  7. Secure: Close the machine's control panel or housing.
  8. Test: Reconnect the machine to power and perform a functional test as per your embroidery machine's specific operational guidelines.

Warning: Always ensure proper grounding and take anti-static precautions when handling electronic components to prevent damage.

3. Operation

The Dahao PC2220B/PC2220C control board is an internal electronic component that facilitates the overall function of your embroidery machine's Dahao control system. It does not have direct user-operable controls.

Once correctly installed, the board enables the machine's control system to function as intended. Refer to your embroidery machine's primary user manual for instructions on operating the machine itself.

4. Maintenance

As an electronic circuit board, the PC2220B/PC2220C requires minimal direct maintenance. However, to ensure its longevity and reliable performance, consider the following general guidelines:

  • Keep Clean: Ensure the environment around the control board within the machine is kept clean and free from dust, lint, and debris, which can accumulate and affect performance or cause short circuits.
  • Dry Environment: Protect the board from moisture and humidity. Operate the embroidery machine in a dry environment.
  • Handle with Care: When handling the board for installation or inspection, always use anti-static precautions and avoid touching the electronic components directly.
  • Regular Inspection: Periodically inspect the board for any visible signs of damage, corrosion, or loose connections.

5. Troubleshooting

If your embroidery machine experiences issues after installing the new control board, consider the following basic troubleshooting steps:

  • Recheck Connections: Ensure all cables and connectors are firmly and correctly attached to the board and other machine components.
  • Power Supply: Verify that the machine is receiving stable power.
  • Machine Diagnostics: Consult your embroidery machine's specific manual for any built-in diagnostic tools or error codes that might indicate the source of the problem.
  • Professional Assistance: If the issue persists, it is advisable to seek assistance from a qualified embroidery machine technician or contact the seller for further support.

6. Specifications

Feature Detail
Model Number PC2220 (PC2220B, PC2220C compatible)
Type Electronic Parts
Use Embroidery Machines
System Compatibility Dahao Control System
Material Plastic and Metal
Origin Mainland China
Package Length 25 cm
Package Width 15 cm
Package Height 6 cm
Package Weight 0.5 kg

7. User Tips

  • Always double-check the specific model, size, and color of the part you need against your machine's requirements before purchasing.
  • If you cannot find the exact part or have questions about compatibility, reach out to the seller for detailed information.
  • Keep records of your machine's original parts for easier replacement identification in the future.

8. Warranty and Support

This product is supplied by Richard's store - Yiwu Prague Embroidery Machine Parts Co., Ltd.

For any technical inquiries, compatibility questions, or support needs regarding the Dahao PC2220B/PC2220C control board, please contact the seller directly. Specific warranty terms and conditions should be confirmed with the seller at the time of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.