HITBOX HBT250P ACDC

Contents

HITBOX HBT250P ACDC TIG Welder Instruction Manual

Model: HBT250P ACDC

1. Introduction

The HITBOX HBT250P ACDC is a versatile 200Amp TIG/Stick/Pulse cold TIG welder designed for precision welding of various metals. Featuring IGBT inverter technology and a 220V input, it offers reliable performance for both professional and personal use. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your welding machine.

Front view of the HITBOX HBT250P ACDC welding machine with included accessories
Figure 1: HITBOX HBT250P ACDC Welding Machine and Accessories

2. Safety Precautions

Always prioritize safety when operating welding equipment. Failure to follow safety guidelines can result in serious injury or death.

  • Wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
  • Ensure adequate ventilation to avoid inhaling welding fumes.
  • Keep a fire extinguisher nearby and know how to use it.
  • Do not weld near flammable materials.
  • Ensure the welding machine is properly grounded.
  • Never touch live electrical parts.
  • Disconnect power before performing any maintenance or adjustments.
  • Keep children and unauthorized personnel away from the welding area.

3. Product Components and Accessories

The HITBOX HBT250P ACDC welding machine comes with the following standard components and accessories:

Welding machine and its accessories: TIG torch, earth clamp, electrode holder, gas tube, tube locks, tungsten needles, ceramic nozzles, crimp caps, conductive nozzle
Figure 2: Included Accessories
  • 1 x TIG torch (WP-17)
  • 1 x Earth clamp
  • 1 x Electrode holder
  • 1 x Gas tube
  • Tube locks
  • Tungsten needles
  • Ceramic nozzles
  • Short / long crimp caps
  • Conductive nozzle

4. Setup and Connections

Before operating the welding machine, ensure all connections are secure and correct.

  1. Power Connection: Connect the welding machine to a 220V power supply. Ensure the power switch is in the OFF position before plugging in.
  2. Gas Connection: Connect the gas tube to the "GAS IN" port on the rear panel of the machine and to your shielding gas cylinder (e.g., Argon for TIG welding).
  3. Ground Clamp Connection: Connect the earth clamp cable to the designated terminal on the front panel (or "ground clamp Back pane" as indicated in the diagram). Secure the earth clamp to the workpiece or welding table.
  4. Welding Torch/Electrode Holder Connection:
    • For TIG welding: Connect the TIG torch to the appropriate terminal on the front panel.
    • For Stick (MMA) welding: Connect the electrode holder to the appropriate terminal on the front panel.
Rear view of the welding machine with labels for Power ON/OFF switch, Fan, Gas In, Current Adjust Knob, On Pulse/Off Pulse Shift Switch, and connections for ground clamp/welding torch
Figure 3: Rear Panel Connections and Controls

Control Panel Overview: The front panel features a digital display, a current adjust knob, and an On Pulse/Off Pulse shift switch, along with various indicators for different welding modes (ARC, TIG AC, TIG Pulse, TIG DC).

5. Operating Instructions

The HBT250P ACDC supports AC/DC TIG welding and Stick (MMA) welding.

5.1. General Operation Steps

  1. Ensure all safety precautions are followed and connections are secure.
  2. Turn on the main power switch located on the rear panel.
  3. Select the desired welding mode (TIG AC, TIG DC, or ARC) using the controls on the front panel.
  4. Adjust the welding current using the "CURRENT ADJUST KNOB" according to the material thickness and welding process.
  5. For TIG welding, open the gas valve on your shielding gas cylinder.
  6. Begin welding, maintaining proper arc length and travel speed.
  7. After welding, close the gas valve (if TIG) and turn off the machine.

5.2. TIG Welding (AC/DC)

This machine is capable of AC TIG for aluminum and DC TIG for stainless steel, alloy steel, low carbon steel, copper, and cast iron.

  • AC TIG (Aluminum): Suitable for welding aluminum with a welding wire diameter of 1.6/2.4/3.2mm and welding thickness of 1.2-4mm.
  • DC TIG: Ideal for stainless steel, alloy steel, low carbon steel, copper, and cast iron.
  • Pulse TIG: Use the "ON PULSE OFF PULSE SHIFT SWITCH" to activate pulse welding for enhanced control and reduced heat input, especially beneficial for thin materials.
  • Downslope Function: The new downslope function linearly decreases the current at the end of the weld, helping to create a clean crater fill and a visually appealing weld bead.
  • 2T (Manual) / 4T (Semi-auto) Switch:
    • 2T (Manual): Press and hold the torch trigger to weld, release to stop. Suitable for short welds or tack welding.
    • 4T (Semi-auto): Press and release the trigger to start welding, press and release again to stop. Ideal for longer welds, reducing operator fatigue.
AC/DC TIG aluminum welding specifications: wire diameter 1.6/2.4/3.2mm, welding thickness 1.2-4mm
Figure 4: Aluminum TIG Welding Parameters
Image illustrating ARC welding with anti-stick, hot start, and arc force features, and TIG welding with stable square wave AC/DC
Figure 5: ARC and TIG Welding Capabilities

5.3. Stick (MMA) Welding

The machine also supports Stick welding with features like Anti-stick, Hot Start, and Arc Force for improved arc ignition and stability.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to clear internal components if necessary, ensuring the machine is unplugged.
  • Cable Inspection: Regularly inspect all welding cables, torch, and ground clamp for damage, fraying, or loose connections. Replace damaged components immediately.
  • TIG Torch Maintenance:
    • Inspect and replace worn tungsten electrodes.
    • Clean or replace ceramic nozzles as needed.
    • Ensure gas lenses and collets are clean and free from obstructions.
  • Storage: Store the welding machine in a clean, dry environment away from excessive dust, moisture, and corrosive materials.

7. Troubleshooting

This section provides solutions to common issues you might encounter.

ProblemPossible CauseSolution
No powerPower cord unplugged, circuit breaker tripped, machine switch off.Check power connections, reset breaker, turn on machine.
No arc / Weak arcPoor ground connection, incorrect current setting, worn electrode/tungsten, gas flow issue (TIG).Ensure good ground, adjust current, replace consumables, check gas supply.
Overheat indicator onExceeded duty cycle, blocked ventilation.Allow machine to cool down, clear ventilation openings.
Poor weld qualityIncorrect settings, improper technique, contaminated material, wrong shielding gas.Adjust parameters, practice technique, clean workpiece, use correct gas.

8. Technical Specifications

FeatureSpecification
ModelHBT250P ACDC
Rated Input Voltage220V ±15%
Frequency50/60 Hz
Rated Input Power (KW)TIG: 4.37; MMA: 6.3
Rated Input Current (A)TIG: 28.1; MMA: 40.5
Rated Input Apparent Power (KVA)TIG: 6.21; MMA: 8.9
Welding Current Adjust Range (A)10 ~ 200
Welding Voltage Adjust Range (V)10 ~ 26
No-load Voltage (V)50V (adjustable)
Rated Duty Cycle @40°C (TIG)60%
Output PolarityAC/DC TIG
Power Factor0.73
Efficiency80%
Insulation ClassF
Protection ClassIP21S
Weight12 kg
Weldable MaterialsStainless steel, alloy steel, low carbon steel, copper, cast iron, aluminum, chromium
Aluminum Welding Thickness1.2 - 4 mm
Dimensions and specification label for HBT250P AC/DC, showing ability to weld copper, aluminum alloy, stainless steel, and cast iron
Figure 6: Product Specifications and Weldable Materials

9. Warranty and Support

9.1. Warranty Information

The HITBOX HBT250P ACDC welding machine comes with a 1-year warranty from the date of discharge at the destination. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

9.2. Customer Support

For any questions, technical assistance, or warranty claims, please contact HITBOX customer service:

Contact information for customer service including WhatsApp, Telephone, and Email
Figure 7: Customer Service Contact Information
  • WhatsApp: +86 16633953613
  • Tel: +86 166 3395 3613
  • Email: 1428040867@qq.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.