HITBOX TIG200PRO

Contents

HITBOX TIG200PRO 6-in-1 Digital Welder Instruction Manual

Model: TIG200PRO | Brand: HITBOX

1. Introduction and Overview

The HITBOX TIG200PRO is a versatile 6-in-1 digital inverter welding machine designed for a wide range of welding applications. It supports Cold TIG, AC/DC TIG, Pulse TIG, Spot TIG, and Stick (MMA) welding, making it suitable for various metals including stainless steel, alloy steel, low carbon steel, copper, cast iron, chromium, and aluminum. Featuring IGBT technology, an exclusive large LED display, and advanced functions like downslope control, this welder offers precise control and reliable performance for both professional and personal use.

HITBOX TIG200PRO Welder with TIG torch, ground clamp, electrode holder, and gas hose.
Figure 1: HITBOX TIG200PRO Digital Welder and included accessories.
Close-up of the HITBOX TIG200PRO's multi-functional digital interface showing welding parameters like amperage, arc force, hot start, and TIG settings.
Figure 2: Exclusive large LED display for multi-functional digital interface.

2. Safety Information

Always prioritize safety when operating welding equipment. Read and understand all safety warnings and instructions before use. Failure to do so may result in serious injury or death.

  • Wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
  • Ensure adequate ventilation to avoid inhaling welding fumes.
  • Protect bystanders from arc rays and hot metal.
  • Always disconnect power before performing maintenance or changing accessories.
  • The machine features automatic overheat and overcurrent welding protection. However, do not rely solely on these features; always operate within the specified duty cycle.
  • Avoid welding in damp or wet conditions.
  • Keep a fire extinguisher nearby.
Internal view of the HITBOX TIG200PRO welder highlighting IGBT technology, a cooling fan, and protective features like overvoltage/overcurrent and overload/overheating protection.
Figure 3: Internal components and safety features of the TIG200PRO.

3. Package Contents and Accessories

Upon unpacking, verify that all items listed below are present and undamaged:

  • 1 x TIG200PRO Welding Machine
  • 1 x TIG Torch
  • 1 x Earth Clamp (205cm / 80.7in)
  • 1 x Electrode Holder (313cm / 123.2in)
  • 1 x Gas Tube / Gas Hose
  • 1 x Tube Locks
  • 1 x Tungsten Bar
  • Ceramic Nozzles (various sizes: 4, 5, 6)
  • Short / Long Crimp Caps
  • Conductive Nozzle
  • Collet Body
  • Collet
  • Hose Adjuster
  • 1 x 110V to 220V Adapter Cable (if applicable to your region)
Diagram showing the HITBOX TIG200PRO welder with its dimensions (41.8cm length, 16.5cm width, 27.6cm height) and all included accessories laid out, including TIG torch, electrode holder, earth clamp, gas hose, and various consumables.
Figure 4: Welder dimensions and included accessories.

4. Specifications

HITBOX TIG200PRO Technical Specifications
FeatureSpecification
Rated Input Voltage220V ±15%
Frequency50/60 Hz
Rated Input Power (KW)TIG: 4.37; MMA: 6.3
Rated Input Current (A)TIG: 28.1; MMA: 40.5
Rated Input Apparent Power (KVA)TIG: 6.21; MMA: 8.9
Welding Current Adjust Range (A)10 ~ 200
Welding Voltage Adjust Range (V)10 ~ 26
No-load Voltage (V)50V (adjustable)
Rated Output Current200A
Rated Output Voltage25 V
Rated Duty Cycle @40°C (TIG)60%
Power Factor0.73
Efficiency80%
Insulation ClassF
Protection ClassIP21S
Dimensions510*150*235mm
Weight12 KG
Welding MaterialCarbon Steel, Stainless Steel, Titanium, Copper, Nickel, Aluminum
Welding Thickness10 mm, 20 mm (specific to material/mode)
CertificationCE

5. Setup

  1. Power Connection: Connect the welder to a 220V power supply. Use the provided 110V to 220V adapter cable if your power source is 110V. Ensure the power outlet is properly grounded and capable of handling the welder's current requirements.
  2. Gas Connection (for TIG welding):
    • Connect the gas hose to the gas inlet on the rear of the welder and to your shielding gas cylinder (e.g., Argon for TIG).
    • Secure all connections with hose adjusters to prevent leaks.
    • Open the gas cylinder valve and set the flow rate on your regulator according to your welding requirements.
  3. TIG Torch Assembly:
    • Insert the collet into the collet body, then insert the tungsten electrode.
    • Screw the collet body into the torch head.
    • Attach the ceramic nozzle over the collet body.
    • Secure the short or long crimp cap onto the torch body.
    • Connect the TIG torch cable to the appropriate connector on the front panel of the welder.
  4. Earth Clamp Connection: Connect the earth clamp cable to the designated ground terminal on the welder. Attach the earth clamp securely to the workpiece or welding table, ensuring good electrical contact.
  5. Electrode Holder Connection (for MMA/Stick welding): If performing MMA welding, connect the electrode holder cable to the appropriate terminal on the welder.

6. Operating Instructions

6.1 Control Panel Overview

The TIG200PRO features an exclusive large LED digital interface for easy parameter adjustment and monitoring. Refer to Figure 2 for a visual guide to the control panel.

6.2 Welding Modes

The TIG200PRO offers 6-in-1 versatile welding selections:

  • Weld Clean: For cleaning the weld area.
  • Cold TIG: Precise cold welding for thin materials or heat-sensitive applications.
  • HF (DC) TIG: High-Frequency DC TIG welding for various metals.
  • (DC) Pulsed TIG: Pulsed DC TIG for enhanced control and reduced heat input.
  • Spot TIG: For quick, localized spot welds.
  • Stick (MMA): Manual Metal Arc welding for general purpose applications.
Six panels illustrating different welding modes: Weld Clean, Cold TIG, HF (DC) TIG, (DC) Pulsed TIG, Spot TIG, and Stick welding.
Figure 5: 6-in-1 Versatile Welding Modes.
Four panels showing examples of Precise Cold Welding, HF Hot Welding, Spot Welding, and Pulse TIG Welding.
Figure 6: Examples of various welding techniques.

6.3 Parameter Adjustment

  • Use the digital interface to adjust parameters such as Amperage, Arc Force, Hot Start, Pulse Frequency (Hz), and TIG specific settings (Tup, Ip, Ib, If, Tpost, Tpre, Is, Tdown).
  • The new downslope function helps decrease the current linearly, protecting the weld surface and creating cleaner patterns.
  • Select between 2T (Manual) for re-tack welding or 4T (Semi-auto) for welding medium thickness plates.
Comparison of the HITBOX LED screen with an ordinary panel, highlighting the downslope and post-flow functions for better welding quality.
Figure 7: LED Screen vs. Ordinary Panel, showing downslope and post-flow benefits.
Examples of DC Square Waveform and DC Pulse Waveform welds, demonstrating diverse waveforms for extended applications.
Figure 8: Square Wave & Triangle Wave for diverse applications.

6.4 Tungsten Electrode Guidelines

Refer to the table below for recommended tungsten electrode diameters, sharpening, angle, and background current settings:

Table detailing recommended Tungsten electrode diameter, sharpened electrode diameter, angle of cone, and background current in Amperes for TIG welding.
Figure 9: Tungsten Electrode Parameter Table.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the welder's exterior with a dry cloth. Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is disconnected from power before cleaning.
  • Cable Inspection: Regularly inspect all cables (power, TIG torch, earth clamp, electrode holder) for cuts, fraying, or damage. Replace damaged cables immediately.
  • Consumables: Check and replace TIG torch consumables (tungsten electrodes, collets, collet bodies, ceramic nozzles) as they wear out.
  • Gas System: Check gas hoses and connections for leaks. Ensure the gas regulator is functioning correctly.
  • Storage: Store the welder in a clean, dry environment, away from excessive dust, moisture, and corrosive materials.

8. Troubleshooting

This section provides solutions to common issues you might encounter.

Common Troubleshooting Guide
ProblemPossible CauseSolution
Welder does not power onNo power supply; faulty power cable; internal fuse blown.Check power connection and outlet. Inspect power cable. Contact support if fuse is suspected.
No arc / Weak arcPoor earth connection; incorrect current setting; worn tungsten/electrode; gas flow issue (TIG).Ensure good earth contact. Adjust current. Replace consumables. Check gas supply and flow rate.
Overheat indicator onExceeded duty cycle; blocked ventilation; high ambient temperature.Allow machine to cool down. Clear ventilation openings. Operate in a cooler environment.
Poor weld qualityIncorrect parameters; improper technique; contaminated workpiece; wrong shielding gas.Adjust welding parameters. Practice technique. Clean workpiece thoroughly. Use correct shielding gas.

9. User Tips

  • For aluminum welding, ensure you are using AC TIG mode and pure argon shielding gas for best results.
  • When using the Cold TIG function, start with lower amperage and adjust gradually to prevent overheating thin materials.
  • Experiment with the Pulse TIG settings (frequency and duty cycle) to find the optimal balance for penetration and bead appearance on different materials.
  • Always prepare your workpiece by cleaning it thoroughly to remove any rust, paint, oil, or contaminants, which can significantly affect weld quality.
  • Utilize the downslope feature to prevent crater cracking at the end of a weld, leading to a smoother finish.

10. Warranty and Support

The HITBOX TIG200PRO welding machine comes with a 1-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.

For technical support, warranty claims, or any questions regarding your product, please contact customer service:

Contact information for customer service including WhatsApp, phone number, email, and a QR code.
Figure 10: Customer Service Contact Information.

Please provide your model number (TIG200PRO) and purchase details when contacting support to expedite assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.