1. Introduction to JIKONG Active Balance BMS
The JIKONG Active Balance Battery Management System (BMS) is designed to optimize the performance and extend the lifespan of various battery types, including LiFePO4, Li-Ion, and LTO batteries. This intelligent system actively balances cell voltages, ensuring efficient energy transfer and protection against common battery issues.
Active balancing, also known as non-lossy balancing, transfers energy from cells with higher energy to those with lower energy. This process achieves voltage balance with minimal energy loss and operates continuously during charging, discharging, or idle states until the voltage difference is within a set range. Unlike passive balancing, active balancing can utilize larger currents (typically 1-2A) without generating excessive heat, making it ideal for larger capacity battery packs that require longer balancing times and higher currents.

2. Package Contents
Upon opening your JIKONG Active Balance BMS package, please verify that all the following components are included:
- BMS Unit x 1
- Switch Key x 1 (long 50cm)
- NTC Temperature Sensor x 1 (long 40cm)
- Sampling Line B x 1 (long 70cm)
- Sampling Line A x 1 (long 70cm)

3. Key Features
- Active Balancing: Efficiently transfers energy between cells to maintain voltage equilibrium, extending battery life and improving performance. Balanced current typically ranges from 400mA to 2A.
- Robust Construction: Features a full aluminum alloy shell for superior heat dissipation and enhanced durability, protecting internal electronic components from environmental damage.
- High-Performance MCU: Equipped with a main control chip for efficient operation and precise battery management.
- Accurate Monitoring: Provides voltage detection accuracy of ±0.015V and a short circuit protection response time of 10-500µs.
- Comprehensive Protection: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, and Short Circuit Protection.
- Rich Interfaces: Supports multiple communication modes simultaneously, including RS485, CAN, Bluetooth (BT), NTC, Soft Switch, SOC Indicator, Key Switch, and Active Equalizer. Customizable GPS and Heat interfaces are also available.
- Multi-interface Display: Compatible with APP, PC external display screens, and dedicated JIKONG home storage displays for real-time data monitoring (voltage, current, temperature, SOC, cycles).
- Protocol Compatibility: Supports various mainstream inverter communication protocols such as Deye, Pylontech, Growatt, Victron Energy, INVT, SMA, and SRNE.
- Wide Application: Suitable for power lithium batteries, storage lithium batteries, outdoor batteries, and other major application scenarios including E-bikes, electric tricycles, forklifts, industrial drones, RV energy storage, and power tools.


4. Installation and Wiring
Proper installation and wiring are crucial for the safe and efficient operation of your JIKONG BMS. Please follow these steps carefully:
- Connecting all the cables: Ensure all necessary cables (sampling lines, NTC, communication cables) are prepared and ready for connection.
- Insert the cable into the BMS: Carefully insert the sampling cables into the designated sampling ports (Sampling port A, Sampling port B) on the BMS. Connect the NTC temperature sensor to its dedicated port.
- Connect the B-line and the P-line to the battery: Connect the main negative terminal (B-) of the battery pack to the B- terminal on the BMS. Connect the main positive terminal (P+) of the battery pack to the P+ terminal on the BMS. The P- terminal on the BMS is for the load/charger negative connection.
Important: Always double-check all connections before powering on the system to prevent damage to the BMS or battery pack.
Wiring Diagrams:


5. Operating Instructions
The JIKONG BMS offers intelligent interaction and easy operation through its dedicated mobile application and PC software.
5.1 Mobile App & PC Software
The mobile phone Bluetooth app "JIKONG SMART BMS" allows for multi-screen display and data connection. All kinds of information are clear at a glance. The app supports iOS, Android, and HarmonyOS systems and multiple languages, which can be switched automatically with your mobile phone system.
With one click, you can view multiple information such as voltage, current, temperature, and number of strings. You can freely choose between the mobile app, computer upper computer software, or a dedicated home storage display according to your actual needs.

5.2 Parameter Adjustment
The system allows you to freely adjust multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance. If you need to adjust the parameters, please read the internal parameters of the protection board first, and then make changes.
The inverter communication protocol can also be set through the host computer software to ensure compatibility with mainstream inverters.


6. Specifications
The JIKONG Active Balance BMS comes in various configurations to suit different battery series and current requirements. Below is a general overview of its specifications. For detailed specifications of specific models (e.g., JK-BD4A17S4P), please refer to the product parameters table.
| Attribute | Value |
|---|---|
| Brand Name | JIKONG |
| Type | LIFEPO4 Battery BMS |
| Handware or Smart | SMART BMS |
| Balance Function | Active Balanced BMS |
| Active Balanced Current | 0.4A/0.6A (up to 1A-2A for some models) |
| Charge and Discharge Port | Common Port BMS |
| Battery Series Supported | 8-17S / 8-20S / 8-24S |
| Continuous Discharge Current | 40A / 60A / 80A |
| Continuous Charge Current | 40A / 60A / 80A |
| Charging Current | 80A (Max) |
| Function | Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection |
| Usage Scenario | Power BMS, Energy Storage BMS, 3C Digital BMS |
| Certification | CE, WEEE |
| Origin | Mainland China |

7. Maintenance
To ensure the longevity and optimal performance of your JIKONG Active Balance BMS, consider the following maintenance guidelines:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
- Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
- Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges. Avoid exposing it to extreme conditions.
- Software Updates: Regularly check for and install any available firmware or software updates for the mobile app or PC software to benefit from improved features and bug fixes.
8. Troubleshooting
If you encounter issues with your JIKONG Active Balance BMS, consider the following basic troubleshooting steps:
- No Power/Display:
- Check all power connections to the BMS and battery.
- Ensure the switch key is correctly inserted and activated.
- Verify the battery pack voltage is within the operational range.
- Balancing Issues:
- Confirm all sampling lines are correctly connected to each cell and are not loose or damaged.
- Check the balancing current settings in the app/software.
- Allow sufficient time for active balancing, especially for large capacity battery packs.
- Communication Problems (Bluetooth/RS485/CAN):
- Ensure the communication module is properly connected.
- For Bluetooth, ensure your device's Bluetooth is enabled and within range.
- For RS485/CAN, verify wiring and protocol settings in the software.
- Over-protection Triggered:
- Identify the specific protection (overcharge, over-discharge, overcurrent, temperature) indicated by the BMS or app.
- Address the root cause (e.g., reduce load for overcurrent, check charger for overcharge, check battery health for over-discharge, ensure proper ventilation for over-temperature).
- The BMS will typically reset automatically once the condition is resolved, or may require a manual reset via the app/software.
For persistent issues or complex problems, please refer to the official JIKONG website or contact customer support.
9. User Tips
- Initial Setup: Always connect the balance wires to the battery cells before connecting the main B- and P- wires to the BMS. This prevents potential damage from voltage spikes.
- App Connectivity: If you experience issues connecting to the app, try restarting your phone's Bluetooth and ensuring the BMS is powered on. Sometimes, a quick power cycle of the BMS can also help.
- Parameter Customization: Take advantage of the customizable protection parameters in the app/software. Adjusting these settings to match your specific battery chemistry and application can significantly improve performance and safety.
- Monitoring: Regularly monitor your battery's health through the app or PC software. Pay attention to cell voltage differences, temperature, and overall State of Charge (SOC) to catch potential issues early.
10. Warranty and Support
JIKONG products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact JIKONG directly through their official website or authorized distributors. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer: Chengdu Jikong Technology Co., Ltd.
For further information, visit www.jk-bms.com.