URLIFE F1L

Contents

URLIFE F1L 14 Inch Folding E-Bike User Manual

Model: F1L

1. Introduction

Thank you for choosing the URLIFE F1L 14 Inch Folding E-Bike. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new electric bicycle. Please read this manual thoroughly before your first ride and keep it for future reference.

2. Safety Information

Your safety is paramount. Please observe the following safety guidelines:

  • Always wear a helmet and appropriate protective gear while riding.
  • Familiarize yourself with local laws and regulations regarding electric bicycles.
  • Do not operate the e-bike under the influence of alcohol or drugs.
  • Perform a pre-ride inspection before each use (brakes, tires, battery, lights).
  • Be aware of your surroundings and ride defensively.
  • Avoid riding in heavy rain or extreme weather conditions.
  • Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
  • The e-bike is UL 2849 & GCC certified, ensuring safety and reliability.

3. Setup and Assembly

Your URLIFE F1L E-Bike comes mostly pre-assembled. Follow these steps to prepare your bike for its first ride:

3.1 Unpacking

Carefully remove the e-bike from its packaging. Inspect for any damage during transit. Keep all packaging materials until you are satisfied with the product.

3.2 Initial Assembly

The following components may require minor assembly or adjustment:

  • Seat: Install and adjust the seat height for comfortable riding.
  • Pedals: Attach the pedals to the crank arms. Note that pedals are often marked 'L' for left and 'R' for right.
  • Reflectors: Ensure all reflectors are properly installed and visible.

For a visual guide, please refer to the product installation video provided by the seller.

Video: URLIFE F1L E-Bike Unpacking and Setup Guide

3.3 Battery Installation and Charging

The e-bike is equipped with a 48V 7.5Ah removable lithium battery.

  • To install the battery, slide it into its compartment until it clicks securely. Use the provided key to lock it in place.
  • To charge, connect the charger to the battery charging port and then to a power outlet. The charging time is typically 3-5 hours.
  • The battery can be charged while installed on the bike or removed.
Diagram showing the removable 48V 7.5AH battery with BMS safety protection and charging port.

Image: Removable 48V 7.5Ah Battery with BMS Safety Protection

3.4 Folding and Unfolding

The F1L features a space-saving folding design for easy transport and storage.

  • Folding: Follow the steps outlined in the diagram to fold the bike in seconds. Ensure all latches are securely fastened after folding.
  • Unfolding: Reverse the folding steps, ensuring all locking mechanisms are engaged before riding.
Three-step diagram illustrating how to fold the e-bike for space-saving storage.

Image: Space-Saving Folding Steps

4. Operating Instructions

4.1 Powering On/Off

  • To power on the e-bike, insert the key into the ignition on the battery and turn it to the 'ON' position. The display on the handlebar should light up.
  • To power off, turn the key to the 'OFF' position and remove it.

4.2 Riding Modes

The URLIFE F1L offers three riding modes:

  • Classic Ride (Sport Mode): Standard pedal cycling with no electric assistance.
  • Pure Electric: Use the throttle for fully electric propulsion without pedaling. Provides up to 40km (25 miles) range.
  • Pedal-Assist: The motor provides assistance as you pedal, extending your range up to 60km (37 miles).
Image showing a rider on the e-bike with icons depicting three riding modes: Classic Ride (Sport Mode), Pure Electric (40km), and Pedal-Assist (60km).

Image: Three Riding Modes

4.3 Braking System

The e-bike is equipped with reliable front and rear dual disc brakes for instant stopping power in any weather.

  • Always apply both front and rear brakes simultaneously for optimal stopping performance and control.
  • Avoid sudden, hard braking, especially with the front brake, to prevent skidding.
Close-up of the e-bike's front wheel showing the dual disc brake system.

Image: Reliable Front and Rear Dual Disc Brakes

4.4 Suspension System

The F1L features a triple shock absorption design for a comfortable ride:

  • Front Fork Suspension
  • Mid-mounted Suspension
  • Saddle Shock Absorption
Diagram illustrating the three points of shock absorption: front fork, mid-frame, and saddle.

Image: Multiple Shock Absorption Design

4.5 Lighting

The e-bike is equipped with a front light and rear reflector for enhanced visibility and safety.

  • Ensure the front light is working before riding in low-light conditions.
  • The rear reflector helps you be seen by traffic from behind.
Image showing the e-bike's front light and rear reflector for safety.

Image: Front Light & Rear Reflector

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your e-bike.

5.1 Battery Care

  • Charge the battery regularly, even if not in use, to maintain its health.
  • Avoid completely draining the battery.
  • Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Do not expose the battery to water.

5.2 General Cleaning

  • Clean the e-bike with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
  • Keep the chain clean and lubricated to ensure smooth operation and prevent rust.

5.3 Brake and Tire Inspection

  • Regularly check brake pads for wear and replace them if necessary.
  • Ensure brake levers are firm and responsive.
  • Check tire pressure before each ride. Recommended pressure can usually be found on the tire sidewall.

6. Troubleshooting

Here are some common issues and their potential solutions:

  • E-bike not powering on:
    • Check if the battery is properly installed and locked.
    • Ensure the battery is charged.
    • Verify the key is turned to the 'ON' position.
  • Motor not engaging in electric/pedal-assist mode:
    • Check battery charge level.
    • Ensure all connections are secure.
    • If the issue persists, contact customer support.
  • Brakes feel spongy or ineffective:
    • Inspect brake cables for damage or looseness.
    • Check brake pads for wear.
    • If hydraulic brakes, they may need bleeding by a professional.
  • Reduced range:
    • Ensure the battery is fully charged before each ride.
    • Riding conditions (hills, headwind, rider weight) can affect range.
    • Tire pressure can impact efficiency; ensure tires are properly inflated.

7. Specifications

Diagram showing the dimensions and weight of the URLIFE F1L E-Bike, including suggested rider height.

Image: URLIFE F1L E-Bike Dimensions and Weight

FeatureSpecification
Model NumberF1L
Brand NameURLIFE
CertificationCE, UL 2849, GCC
Motor Wattage200-250W (Nominal), 500W (Peak)
Voltage48V
Power SupplyLithium battery
Battery Capacity7.5Ah
Charging Time3-5 hours
Range per Charge20-40 miles (Pure Electric), >60 km (Pedal-Assist)
Max Speed<25km/h (approx. 15.5 mph)
Max Slope30°
Rated Passenger CapacityOne Seat
StyleMultifunctional Type
Motor TypeBrushless
FoldedYes
Wheel Size14 Inches (350mm)
Frame MaterialSteel
Bicycle Weight46.5 LBS
Maximum Load265 LBS
Suggested Rider Height4'3" - 5'6"
Total Length120 cm
Tail Height50 cm
Max Seat Height101 cm
Min Seat Height68 cm
Max Handlebar Height98 cm
Min Handlebar Height85 cm
Seat Length29 cm
Folded Length75 cm

8. Warranty and Support

Your URLIFE F1L E-Bike comes with a comprehensive warranty to ensure your peace of mind.

8.1 Warranty Information

Warranty information table for Frame, Battery, and Motor, each with a 12-month warranty period and specific terms.

Image: Warranty Info Table

Parts & ComponentsWarranty PeriodWarranty Terms
Frame12 monthsCovered after sales: natural deformation/ welding cracks/ desoldering cracks/ manufacturing defects. Not covered after sales: self-modification/ damage upon crash.
Battery12 monthsCovered after sales: Replacement for poor contact, power failure, no power storage, and capacity below 60%. Not covered after sales: water ingression/ artificial damage/ poor maintenance as in no charging for over a month.
Motor12 monthsCovered after sales: repair for coil phase damage, demagnetisation, detachment, axle deformation, noisy bearing and other quality defects. Not covered after sales: any damage caused by improper riding or operation, alteration without authorisation or any other artificial reason.
Others/Please contact us upon damage.

8.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.

9. User Tips

  • Accelerator Functionality: Yes, the bike features an accelerator, allowing it to move without pedaling in 'Pure Electric' mode.
  • Riding Without Pedaling: The 'Pure Electric' mode enables the bike to operate solely on motor power, similar to a scooter.
  • Motor Power: The bike has a nominal motor wattage of 200-250W, with a peak power output of 500W, providing ample power for inclines and acceleration.
  • Rain Protection: While the e-bike is designed for outdoor use, it is generally recommended to avoid riding in heavy rain to protect electronic components and ensure longevity.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.