GT SONIC GT SONIC-D13

Contents

GT SONIC 13L Digital Heated Ultrasonic Cleaner User Manual

Model: GT SONIC-D13

Brand: GT SONIC

1. Introduction

The GT SONIC-D13 is a professional-grade digital heated ultrasonic cleaner designed for efficient and thorough cleaning of various tools and parts. Featuring degas and dual power modes (Normal/Soft), this unit is versatile for both robust and delicate cleaning applications. Its high-performance industrial transducers ensure effective cavitation for superior cleaning results.

2. Safety Instructions

  • Always ensure the unit is properly grounded.
  • Do not operate the cleaner without liquid in the tank.
  • Do not immerse the main unit in water or other liquids.
  • Keep the unit away from children.
  • Use appropriate cleaning solutions for your items and always follow solution manufacturer's safety guidelines.
  • Avoid touching the tank or solution during operation, especially when heated.
  • Unplug the unit before cleaning or performing any maintenance.
  • Do not use flammable, explosive, or corrosive cleaning solutions.
  • Ensure proper ventilation when using cleaning solutions that may emit fumes.

3. Package Contents

Upon unpacking, please verify that all the following items are included:

  • GT SONIC-D13 Ultrasonic Cleaner Unit
  • Stainless Steel Lid
  • Stainless Steel Basket
  • Power Cord
  • User Manual
Contents of the GT SONIC-D13 Ultrasonic Cleaner box, including the main unit, lid, basket, power cord, and user manual.
Figure 3.1: Included Accessories

4. Product Overview

4.1 Front View

Front view of the GT SONIC-D13 Ultrasonic Cleaner, showing the control panel and stainless steel tank.
Figure 4.1: Front View of the Unit

4.2 Rear View

Rear view of the GT SONIC-D13 Ultrasonic Cleaner, showing the power input socket, power switch, fuse, and ventilation louvers.
Figure 4.2: Rear View of the Unit

4.3 Control Panel and Components

Detailed diagram of the GT SONIC-D13 Ultrasonic Cleaner's control panel and external components.
Figure 4.3: Control Panel and Components

The control panel features digital displays and intuitive buttons for setting cleaning parameters:

  • Temperature Display (0-80°C): Shows the current and set temperature.
  • Timer Display (1-99 min): Shows the remaining and set cleaning time.
  • Temp+ / Temp-: Buttons to increase or decrease the target temperature.
  • Time+ / Time-: Buttons to increase or decrease the cleaning duration.
  • Heating ON/OFF: Activates or deactivates the heating function.
  • Degas ON/OFF: Activates or deactivates the degas function.
  • Soft Ultrasonic: Selects the soft power mode for delicate items.
  • Normal Ultrasonic: Selects the normal power mode for standard cleaning.

Key components of the unit include:

  • Stainless Steel Tank: The main reservoir for cleaning solution.
  • Stainless Steel Lid: Covers the tank during operation to reduce noise and evaporation.
  • User Manual: Provides detailed instructions.
  • Plug: For connecting to a power outlet.
  • Stainless Steel Basket: For holding items during cleaning, preventing them from resting directly on the tank bottom.
  • Handle: For easy portability.
  • Louver: Ventilation openings for heat dissipation.
  • Fuse Inside: Safety feature to protect against electrical overload.
  • Power Switch: Main on/off switch for the unit.
  • Socket: Power input connection.
  • Water Outlet: Drain valve for emptying the tank.

5. Setup

  1. Placement: Place the ultrasonic cleaner on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
  2. Power Connection: Connect the power cord to the unit's socket and then to a suitable electrical outlet. The unit supports various plug types depending on your region (e.g., 100V-120V US Plug, 220V-240V AU/EU/UK Plugs). Ensure the voltage matches your local supply.
  3. Fill the Tank: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the MIN and MAX marks. Do not overfill or underfill.
  4. Insert Basket: Place the stainless steel basket into the tank. Place the items to be cleaned into the basket, ensuring they are fully submerged but not touching the bottom of the tank directly.
Diagram showing various power plug types: US, AU, EU, and UK, with corresponding voltage ranges and regions.
Figure 5.1: Power & Plug Types (Reference Only)

6. Operating Instructions

  1. Power On: Flip the main Power Switch located at the rear of the unit to the 'ON' position. The digital displays will illuminate.
  2. Set Temperature (Optional): Press the 'Heating ON/OFF' button to activate the heater. Use the 'Temp+' and 'Temp-' buttons to set the desired cleaning solution temperature (range: 0-80°C). The unit will begin heating.
  3. Set Cleaning Time: Use the 'Time+' and 'Time-' buttons to set the desired cleaning duration (range: 1-99 minutes).
  4. Select Power Mode: Choose between 'Soft Ultrasonic' for delicate items or 'Normal Ultrasonic' for general cleaning by pressing the respective buttons.
  5. Activate Degas (Optional): For improved cleaning effect or to prepare the solution, press the 'Degas ON/OFF' button. This function helps remove dissolved gases from the cleaning solution.
  6. Start Cleaning: The ultrasonic cleaning will start automatically once the time and power mode are set. The timer will count down.
  7. End of Cycle: The unit will automatically stop when the timer reaches zero. You can manually stop the cleaning at any time by pressing the power mode button again or turning off the main power switch.
  8. Remove Items: Carefully remove the basket with the cleaned items. Rinse the items with clean water if necessary and dry them.
  9. Drain Solution: After cleaning, turn off the unit and unplug it. Use the water outlet (drain valve) to empty the used cleaning solution into a suitable container.

7. Maintenance

  • Cleaning the Tank: After each use, especially when using different cleaning solutions, drain the tank completely. Wipe the interior of the tank with a soft cloth. Do not use abrasive cleaners or steel wool.
  • Exterior Cleaning: Wipe the exterior of the unit with a damp cloth. Avoid getting water into the control panel or electrical components.
  • Solution Replacement: Replace cleaning solutions regularly, or as recommended by the solution manufacturer, to maintain optimal cleaning performance.
  • Storage: When not in use, ensure the unit is clean, dry, and stored in a cool, dry place.

8. Troubleshooting

ProblemPossible CauseSolution
Unit does not power onNo power supply; Power switch off; Blown fuseCheck power connection; Turn on power switch; Replace fuse (refer to service manual or contact support)
Ultrasonic function not workingNo liquid in tank; Incorrect power mode selected; Faulty transducerEnsure tank is filled; Select 'Soft' or 'Normal' ultrasonic mode; Contact support
Heating function not workingHeater switch off; Faulty heating elementPress 'Heating ON/OFF' button; Contact support
Poor cleaning resultsIncorrect cleaning solution; Insufficient cleaning time/temperature; Overloaded tankUse appropriate solution; Increase time/temperature; Reduce load; Use degas function

9. Specifications

FeatureSpecification
ModelGT SONIC-D13
Tank Size (L×W×H)330 × 300 × 150 mm
Unit Size (L×W×H)360 × 330 × 310 mm
Volume13 L
Ultrasonic Power (Normal)300 W
Ultrasonic Frequency40 kHz
Heating Power400 W
Timer1-99 MIN
Heating Temperature0-80℃
Voltage110 V (or 220-240V depending on region)
MaterialStainless Steel SUS304
Core ComponentsTransducer
CertificationCE, RoHS, FCC
Diagram illustrating the overall dimensions and tank dimensions of the GT SONIC-D13 ultrasonic cleaner.
Figure 9.1: Product Dimensions

10. User Tips

  • Choosing Cleaning Solution: Always use a cleaning solution specifically designed for ultrasonic cleaners and compatible with the materials of your items. Distilled water with a small amount of dish soap or specialized ultrasonic cleaning concentrate is often effective for general cleaning.
  • Pre-Rinse Heavily Soiled Items: For items with heavy dirt or debris, a quick pre-rinse or wipe-down can improve ultrasonic cleaning efficiency and prolong the life of your cleaning solution.
  • Degas for Best Results: For new cleaning solutions, running the degas function for a few minutes before adding items can significantly improve cleaning performance by removing dissolved gases that interfere with cavitation.
  • Basket Use: Always use the provided basket to suspend items in the solution. This prevents items from dampening the ultrasonic vibrations by touching the tank bottom and protects the tank from potential damage.
  • Temperature Matters: Heating the solution can enhance cleaning effectiveness, especially for oils and greases. However, always check if your items can withstand the chosen temperature.

11. Warranty and Support

The GT SONIC-D13 Ultrasonic Cleaner comes with a 1-year warranty on core components, including the transducer. For any issues or inquiries, please contact customer support. After-sales service includes online support, video technical support, and availability of spare parts.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.