1. Introduction
The Ziqqucu DC1036L is a 36W Digital Uninterruptible Power Supply (UPS) designed to provide seamless power backup for various home devices such as routers, optical modems, surveillance cameras, network switches, and NAS devices. It features multiple DC output voltages (5V, 9V, 12V, 15V, 24V) and a USB output, ensuring your essential devices remain operational during power outages. The device incorporates advanced features like instantaneous switching, overheating protection, reverse battery connection protection, and a high-definition LED display for real-time monitoring.
Important Note: This uninterruptible power supply case requires 4 x 18650 batteries, which are not included and must be provided by the user.
2. Package Contents
Please verify that all items listed below are included in your package:
- 1 x DC1036L Digital UPS Uninterruptible Power Supply
- 1 x Power Cord
- 1 x One-to-Two DC Adapter Cable
- 1 x One-to-One DC Adapter Cable
- 1 x Screwdriver
- 1 x Instruction Manual (Chinese and English)

3. Product Overview
The DC1036L UPS is designed for ease of use and reliability. Familiarize yourself with its components and features:

- Power Switch: Turns the UPS on/off.
- Reset Button: Resets the device.
- PoE Input Interface: For Power over Ethernet devices.
- LAN Input Interface: For standard network connections.
- Selector Switch (15V/24V): Adjusts output voltage for PoE/LAN ports.
- USB Output Port: 5V/2A output for charging or powering USB devices.
- DC Output Ports (5V, 9V, 12V): Dedicated DC outputs for various devices.
- LED Display Screen: Shows real-time battery voltage (vbat), internal temperature, and output current (Iout).

The LED display provides critical information at a glance:
- Battery Level Display: Indicates remaining battery charge.
- Temperature Display: Shows the internal circuit temperature.
- Voltage (vbat): Displays the current battery voltage.
- Electric Current (Iout): Shows the current output to connected devices.

The UPS features a removable battery compartment for easy replacement or upgrade of 18650 lithium-ion batteries.
Product Demonstration Video
4. Setup Instructions
Follow these steps to set up your DC1036L UPS:
- Install Batteries:
- Using the provided screwdriver, open the battery compartment cover on the underside of the UPS.
- Insert four (4) 18650 lithium-ion batteries (not included) into the compartment, ensuring correct positive (+) and negative (-) polarity. The device has reverse battery connection protection, but correct installation is always recommended.
- Close the battery compartment cover securely.

Figure 4.1: Battery Installation and Connection Guidance - Connect to Power Outlet: Plug the provided AC power cord into the UPS input port (AC85-265V) and then into a wall power outlet. The UPS will begin charging the installed batteries.
- Determine Device Voltage: Identify the operating voltage and current of the device you wish to power (e.g., router, modem). This information is usually found on the device's power adapter, a sticker on the device, or in its manual. Common voltages are 5V, 9V, 12V, 15V, or 24V.
- Connect Devices:
- Select the appropriate DC output port on the UPS (5V, 9V, 12V) or use the PoE/LAN ports with the selector switch (15V/24V).
- Use the provided DC adapter cables to connect your device to the corresponding output port on the UPS. For example, if your device requires 5V, connect it to the 5V DC output.
- If using PoE/LAN, ensure the selector switch is set to the correct voltage (15V or 24V) before connecting.
- You can also use the USB output for 5V devices.

Figure 4.2: Connecting Multiple Devices - Power On: Press the power switch on the UPS to turn it on. The LED display will illuminate, showing the battery status, voltage, and current.
5. Operating Instructions
Normal Operation
Once set up, the DC1036L UPS operates automatically. When connected to a power outlet, it will charge its internal batteries and provide power to your connected devices. The LED display will show real-time operational parameters.
Power Outage Takeover (Instantaneous Switching)
In the event of a power outage, the UPS will immediately and seamlessly switch to battery power, ensuring your connected devices continue to operate without interruption. There will be no reboots, disconnections, or black screens for your devices.

Power Restoration
When grid power is restored, the UPS will smoothly switch back to AC power and resume charging its batteries, all without interrupting the power supply to your connected devices.
Monitoring the LED Display
Regularly check the LED display for the following information:
- Battery Level: Monitor the battery icon to ensure sufficient charge.
- Voltage (vbat): Displays the current battery voltage.
- Output Current (Iout): Shows the total current being drawn by connected devices.
- Temperature: If the internal circuit temperature exceeds 45°C, the temperature icon will flash, and the DC output will temporarily shut off to prevent damage. The output will resume once the temperature cools down.
6. Maintenance
Battery Replacement
The DC1036L UPS uses four (4) 18650 lithium-ion batteries. Over time, battery capacity may decrease. You can replace or upgrade the batteries to extend the service life of the device.
- Ensure the UPS is turned off and disconnected from the AC power outlet and all connected devices.
- Use the provided screwdriver to open the battery compartment cover on the underside of the unit.
- Carefully remove the old 18650 batteries.
- Insert new 18650 batteries (with a capacity of at least 2000mAh each) into the compartment, paying close attention to the correct positive (+) and negative (-) polarity markings.
- Close the battery compartment cover securely.
- Dispose of old batteries responsibly according to local regulations.

Cleaning
Wipe the exterior of the UPS with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Storage
If storing the UPS for an extended period, ensure the batteries are fully charged, then turn off the unit. Store in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| UPS does not power on. | Batteries not installed or incorrectly installed. | Ensure 4 x 18650 batteries are correctly inserted with proper polarity. |
| No output power to connected devices. | Incorrect voltage selection or cable connection. | Verify the connected device's voltage requirement and ensure it matches the UPS output port. Check cable connections. |
| Temperature icon flashing, DC output off. | Overtemperature protection activated. | Disconnect devices and allow the UPS to cool down. Ensure adequate ventilation around the unit. Output will resume automatically. |
| UPS shuts down unexpectedly. | Overload protection activated or low battery. | Reduce the load by disconnecting some devices. Check battery level and recharge if necessary. |
| Device connected to PoE/LAN port not receiving power. | Incorrect selector switch setting. | Ensure the 15V/24V selector switch is set to the correct voltage for your PoE/LAN device. |
8. Specifications
| Feature | Specification |
|---|---|
| Product Name | Digital UPS Uninterruptible Power Supply |
| Model | DC1036L |
| Input Voltage | AC85-265V |
| Output Current | 16.4V/DC 2.5A |
| Total Output Power | 36W |
| Battery Type | Lithium-ion battery (18650) |
| Battery Quantity | 4 (not included) |
| Minimum Battery Capacity | >2000mAh per 18650 battery |
| Frequency | 50-60Hz |
| Output Specifications | USB: 5V/2A DC1: 5V/2A DC2: 9V/2A DC3: 12V/2A LAN: 15V/24V-1A PoE: 15V/24V-1A |
| Working Temperature | 0℃~45℃ |
| Humidity | 10% -90% RH |
| Shell Material | Fireproof ABS |
| Product Size | 171mm x 113mm x 37mm |
| Net Weight | ≈446g |
| Display | LED |

9. User Tips
- Always double-check the voltage requirements of your devices before connecting them to the UPS to prevent damage.
- For optimal performance and battery life, use high-quality 18650 lithium-ion batteries with a capacity of 2000mAh or higher.
- Ensure proper ventilation around the UPS to prevent overheating, especially when powering multiple devices.
- If you experience frequent power outages, consider having a spare set of charged 18650 batteries ready for quick replacement.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official Ziqqucu website. Keep your purchase receipt as proof of purchase.