1. Introduction
The Galletto 1260 is an easy-to-use hardware device designed for automotive chip tuning. It allows for reading and writing data to your vehicle's Engine Control Unit (ECU), enabling performance modifications such as increasing BHP, torque, and power, and improving vehicle responsiveness across all RPM ranges. This tool is compatible with a wide range of modern diesel (TDi, HDi, JTD) and petrol cars.
2. Setup and Software Installation
- Operating System Requirements: The Galletto 1260 software is designed to run on Windows 7 (32-bit version) or Windows XP. Ensure your computer meets these requirements for optimal performance.
- Antivirus Software: Before downloading and installing the software, temporarily disable your computer's antivirus software. Re-enable it after installation is complete.
- Internet Connection: Do not connect to the Internet while installing or using the software to prevent potential conflicts or interruptions.
- Software Download: If the installation CD is damaged or unavailable, please contact customer support to obtain the software download link. A known download link for Galletto 1260 is: https://mega.nz/#!LGYUGA4K!X9jIWZ7omJLtSQH-hxg0G5IYmvIIK LeejbtqVMqv2Jo. Copy and paste this link into a new browser tab (Microsoft Edge is recommended) rather than clicking directly from potentially restricted sources.
- Hardware Connection: Connect the Galletto 1260 device to your computer via the USB cable and to your vehicle's OBD2 port.
3. Operating Instructions
3.1 Software Interface and Language Selection
Upon launching the Galletto 1260 software, you will be presented with an interface allowing you to select your preferred language. Supported languages include English, Spanish, French, German, Italian, and Portuguese.
3.2 ECU Read/Write Operations
The Galletto 1260 tool facilitates reading and writing data to various Engine Control Units (ECUs). It supports a range of ECUs including EDC16, EDC15, MEx.x, and DELCO. The process typically involves selecting the vehicle make and model within the software, then initiating the read or write operation. Always ensure you have a stable connection and a backup of your original ECU data before performing any write operations.
3.3 Supported Vehicles
The tool supports a wide array of vehicles from manufacturers such as AUDI, VW, SEAT, SKODA, BMW, CHRYSLER, CITROEN, FERRARI, ALFA, FIAT, and LANCIA. It is compatible with various ECU types including, but not limited to, EDC15V, EDC15P, ME7.5.5, ME7.1.5, EDC16U1, EDC16U31, EDC16CP34, ME7xx Boot Mode, EDC15 C2, EDC16 C2, EDC16+ C34, ME744, ME745, IAW 48P, IAW 48P2, SAGEM2000, SIEMENS SID 881/801/804/806, M52 MOTRONIC, ME7 IBRIDA, ME7.3.2, EDC 15C, EDC 16C8, EDC 16C9, EDC 16+ C39, IAW MJD6JFH, M155 IBRIDA, IAW 4AF 59F, IAW 49F/4EF, ME2.1, ME73H4, ME7.2.1. For a comprehensive and up-to-date list of supported models and specific ECU versions, please refer to the detailed documentation provided with the software or the official PDF manual.
4. Maintenance
- Cleaning: Keep the device and cables clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Storage: Store the Galletto 1260 in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Care: Avoid bending or twisting the cables excessively to prevent internal damage.
5. Troubleshooting
- Software Not Opening/Restricted: If the software download link or web page cannot be opened, it may be restricted by your browser. Try using Microsoft Edge browser. Ensure antivirus software is disabled during download and installation.
- Product Not Working Normally: If the product does not function as expected, do not attempt to resolve the issue independently or open a dispute immediately. Please contact customer support for assistance.
- Damaged Installation CD: If the physical installation CD is damaged, contact customer support to receive a digital download link for the software.
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | JFIND |
| Model | Galletto 1260 |
| Item Type | Car Diagnostic Cables and Connectors |
| Function | ECU Chip Tuning Tool |
| Special Features | Auto Diagnostic Cable |
| Software Version | Galletto 1260 |
| Hardware Version | New |
| Voltage | 12v |
| Operating System | Windows 7 32bits/XP |
| Car Maker Compatibility | For VW/AUDI/SKODA/SEAT/BMW and others |
| Material | Plastic and Material |
| Certification | CE |
| Origin | Mainland China |
| Package Length | 19 cm |
| Package Width | 15 cm |
| Package Height | 4 cm |
| Package Weight | 0.11 kg |
7. User Tips
- Understand the Function: This tool is primarily used for ECU chip tuning, allowing you to read and write data to your vehicle's Engine Control Unit (ECU) to modify performance parameters.
- Check Compatibility: Always verify that your specific vehicle model and ECU type are supported by the Galletto 1260 software before attempting any operations. Refer to the comprehensive list within the software or the PDF manual.
- Backup ECU Data: Before performing any write operations to your ECU, always create a backup of the original ECU data. This is crucial for restoring your vehicle's original settings if needed.
8. Warranty and Support
For any technical support, troubleshooting assistance, or inquiries regarding software updates and compatibility, please contact the seller or manufacturer directly. Refer to the official user manual in PDF format for additional detailed information and support resources:
- Official User Manual (PDF): View PDF Manual
