Introduction
The Choyong WT2 is a versatile, multi-functional communication device designed to offer both extensive range walkie-talkie capabilities and a rich entertainment experience. It integrates global public network intercom, analog intercom, internet radio, and an AI voice assistant. This manual provides detailed instructions for setting up, operating, and maintaining your WT2 device.

Setup
1. Connecting to Wi-Fi
- From the standby screen, press the "0" key to enter the Settings menu.
- Select the Wi-Fi network you wish to connect to.
- Use the device's keys (up/down arrows) to select characters on the virtual keyboard and the OK key to input.
- After entering all required characters, choose the "Connect" icon on the virtual keyboard to input the password and complete the connection.
Wi-Fi Connection Notes:
- This device only supports WPA/WPA2 encryption protocols. If Wi-Fi still does not work after entering the correct password, please check your router settings to ensure the encryption protocol is not set to WPA2/WPA3.
- If you are using a Mesh network, make sure the Fast Roaming feature is disabled, as it may cause Wi-Fi to malfunction.
- This device only supports 2.4 GHz Wi-Fi.
2. Activating the Built-in eSIM
The Choyong WT2 does not have a physical SIM card slot. To use a 4G network outdoors, you need to enable the built-in eSIM function.
- Purchase a Data Package: Go to the Choyong official website (www.choyongradio.com) to purchase a data package.
- Alternatively, follow the instructions under
Settings → eSIMon the device to purchase and activate the eSIM.
The system will automatically choose the best available 4G network operator based on your local carrier coverage. If you prefer not to use the eSIM, you can still access the network outdoors by connecting through your mobile phone's hotspot.
3. TF Card Insertion
- Turn off the device before inserting the TF card.
- After insertion, turn the device back on to use it normally.
4. Battery Charging
The device is powered by a 2500mAh rechargeable lithium battery. A USB-Type-C cable is supplied in the package.
- Connect the Type-C cable to a 5V power adapter.
- You may use any standard mobile phone charger, as the mobile quick-charging protocol will automatically adjust the charger's output voltage to 5V when charging the device.
IMPORTANT: DO NOT use an iPad charger or a computer charger for charging.
Note: If the device is playing while charging, the charging process will take significantly longer to complete.

Operating Instructions
1. Basic Device Operation
- Power On/Off: Long press the ON/OFF ( ) button to turn the device on or off.
- Volume Control: Use the Volume + and Volume - buttons to adjust the audio level.
- Navigation: Use the Previous ( ) and Next (►) buttons to navigate through content or menus.
- Confirmation: Short press the OK button to confirm selections.
- Return: Short press the Return (C) button to go back to the previous menu.
2. Key Functions
- PTT Key: Short press to activate the intercom function. Highlight and select the intercom mode, then long press to start speaking.
- Number 1 (Ai Key): Long press on the standby screen to search programs using the AI voice assistant.
- Number 2 (FM Shortcut Key): Short press to enter FM mode. Long press in FM mode to activate the ATS (Automatic Tuning System and Storage) function.
- Number 3 (SW/MW Shortcut Key): Short press to enter SW mode, and press again to switch to MW mode. Long press in SW mode to activate the ATS function for SW. Press and hold in MW mode to activate the ATS function of MW mode.
- Number 4 (VF/VM Switch Key): In FM/AM mode, short press to switch between Frequency mode (FREQ) and Stored Channel mode (ADDR).
- Number 5 (Pause/Play Button): Short press in playback mode to pause, and short press in standby or pause mode to resume playback.
- Number 6 (Menu Key): Short press to enter the menu interface.
- Number 7 (Favorite Key): Short press in standby mode to open the favorites list. In playback mode, short press to save the program currently being played.
- Number 8 (Recording Key): When playing online programs, short press to activate the recording function. In radio mode, short press to change the receiving bandwidth. In standby mode, short press to play recordings.
- Number 9 (Local File Key): Short press to play programs or recordings stored on the TF card.
- Number 0 (Settings Key): Short press in standby mode to enter the settings interface. In radio mode, short press to activate the keyboard input function.
3. Intercom Background Standby
After enabling the background standby function of the walkie-talkie, real-time intercom messages can be received. However, this will significantly shorten standby time. When not using the intercom function, it is recommended to turn off the background standby feature.

4. Whip Antenna Usage
- Intercom Mode: Retract the antenna to ensure efficient transmitting and receiving.
- Radio Mode: Extend the telescopic antenna to improve reception.
Attention: When removing the telescopic antenna, do not enable the intercom function. Doing so may damage the analog intercom amplifier module.
5. Bluetooth Playback
This device supports Bluetooth transmission. You can listen to the programs it plays through a Bluetooth speaker or Bluetooth headphones. You can configure the Bluetooth function in the Settings → Bluetooth menu.

6. Voice Search Function (GPT AI)
The built-in GPT AI voice assistant allows you to vocally request any radio station, podcast, or music.
- Long press the Number 1 (Ai key) button.
- Wait for the MIC icon on the screen to start flashing.
- Speak the name of the radio station or content you wish to find.
Tips: Please say the name of the radio stations only, so that the search results will be more accurate.

7. How to Add a Station/Podcast
You can add new stations or podcasts to your device in the following ways:
Method 1: Via the Choyong Official Website
- Visit www.choyongradio.com to search for stations or podcasts.
- Add them directly to your device under the "My Favorites" menu.
Method 2: By Scanning a QR Code with Your Mobile Phone
- After scanning the code with your mobile phone, paste the URL of the radio station you want to add into the address bar.
- Make sure the URL is an audio format link (e.g., ending with .mp3, .m3u8, .aac) rather than a regular website address.

Maintenance
To ensure the longevity and optimal performance of your Choyong WT2, follow these general maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Exposure: The device is not waterproof. Avoid exposing it to water or high humidity.
- Physical Damage: Protect the device from drops and impacts.
Troubleshooting
Problem: Unable to play particular stations after connecting to the network successfully.
- Solution: The station may not be broadcasting at this time of day (consider different time zones).
- Solution: The station server capacity might be insufficient due to too many users.
- Solution: The internet connection between the radio and the radio station server might be too slow or unstable to support the broadcast data rate.
- Solution: The link of the radio station might be outdated. Please contact Choyong support to update the station list.
Problem: Cannot connect to Wi-Fi network.
- Solution: Confirm that the Wi-Fi network can access the internet (i.e., can browse the web) using another device.
- Solution: This radio only supports 2.4G Wi-Fi and does not support 5G Wi-Fi.
- Solution: Check the encryption protocol of the router; this radio only supports WPA/WPA2 and does not support WPA3.
- Solution: The radio does not support Wi-Fi extenders.
Problem: Insufficient Wi-Fi signal strength.
- Solution: Check the distance to the router. See if a computer/mobile phone can connect to the network in this location. If the signal is weak, please optimize the distance of the router's location.
Problem: The radio got freeze or no response.
- Solution: Force restart the radio. Press the ON/OFF ( ) button and hold for 5 seconds until the radio restarts (shows a white screen), then release the button.
Problem: The radio screen is black and no response, regardless of any button operation/charging.
- Solution: Hold down the power button for 30 seconds, release it, then hold down the power button again for 5 seconds until the screen lights up, and then release it. The machine should now be functioning normally.
- Solution: If it still doesn't work, please check if the battery needs charging.
Specifications
| Feature | Specification |
|---|---|
| Model | WT2 |
| Weight | 176g |
| Colour | Black |
| Size | 125*60*25mm |
| FM Frequency | 64-108MHz (Step: 100KHz) |
| SW Frequency | 2300-26000KHz (Step: 5KHz) |
| MW Frequency | 522-1710KHz (Step: 9KHz/10KHz) |
| Speaker | 4ohm 3W |
| Battery | 2500mAh Rechargeable Battery Pack |
| Network | FDD Band 1/2/3/4/5/7/8; TDD Band 38/40/41 |
| Bluetooth Version | 5.2 |
| Analog Walkie-Talkie Power | 2W |
| LCD | 1.8 inch (Resolution: 240*284) |
| TF Card Support | Maximum 32 GB |
| Analog Distance | 1-5KM |
User Tips
- Radio Selectivity: The device is equipped with a TEF6686 chip, which contributes to ultra-sensitive radio selectivity, especially for FM/SW reception.
- Internet Radio: Take advantage of the 40,000+ internet radio stations available globally via Wi-Fi or eSIM. These are categorized by continent, country, province, city, station type, and popularity for easy browsing.
- Voice Assistant: Utilize the GPT AI voice assistant for quick access to radio stations, podcasts, or music. Remember to speak clearly and state only the name of the station for best results.
- Custom Stations: For ultimate playback flexibility, you can add custom streaming stations by directly entering a valid audio URL (supporting mp3, AAC, m3u8 formats) on the device.
- Analog Intercom: The analog intercom supports manual frequency programming and communication with other walkie-talkies. Features like Direct Connect Mode, Repeater Mode, and various encryption options are available.
- Firmware Updates: Keep an eye on the official Facebook Group and YouTube Channel for announcements regarding firmware upgrades. Regularly check for new versions under
Settings → Version Infoto benefit from feature upgrades and bug fixes. - TF Card for Updates: When performing firmware upgrades, use a high-quality TF card (max 32GB). If an upgrade fails, try formatting the card or downloading the firmware from the official website and using a Windows computer.
Firmware Upgrade Instructions
For feature upgrades or bug fixes, your device may receive occasional updates. We will announce these updates on our official Facebook Group and YouTube Channel. You can follow our official accounts, or check for new versions under Settings → Version Info.
- When a new version is available, please insert a high-quality TF card (with a capacity no greater than 32GB) into the device.
- Follow the on-screen instructions to complete the upgrade.
If the upgrade fails:
- Remove the TF card and check whether the device still works properly. If it functions normally, you may format the TF card and attempt the upgrade again.
- Alternatively, you can download the latest firmware from the Choyong official website (www.choyongradio.com) and perform the upgrade using a Windows computer.
Support
For more details and operation tips, please check the instruction videos on YouTube:
https://www.youtube.com/@choyongradio
For 24-hour customer service, please contact:
Official Website: