1. Introduction
This manual provides detailed instructions for the safe and effective operation of your 1500W LED RGB Smoke Bubble Machine. This versatile device combines smoke and bubble effects with vibrant RGB lighting, making it ideal for various events such as parties, weddings, Halloween, and DJ performances. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
- Always connect the machine to a grounded power outlet.
- Do not operate the machine if the power cord is damaged.
- Ensure adequate ventilation around the machine during operation.
- Use only high-quality, water-based smoke fluid and bubble fluid recommended for this type of machine. Using incorrect fluids can cause damage or fire hazards.
- Do not touch the nozzle during operation, as it can become very hot.
- Keep the machine away from children and pets.
- Do not immerse the machine in water or expose it to rain or moisture.
- Unplug the machine from the power supply before cleaning or maintenance.
- Do not block the fan or ventilation openings.
3. Package Contents
Please check the box to ensure all items are present:
- 1 x 1500W LED RGB Smoke Bubble Machine
- 1 x Power Cord
- 1 x Remote Control
- 1 x Instruction Manual (this document)
4. Product Overview
Familiarize yourself with the components of your smoke bubble machine:
- LCD Display: For menu navigation and settings.
- Handle: For easy transport.
- Visual Tank Scale: To monitor fluid levels.
- Recycling Bubble Oil: System for efficient bubble fluid use.
- Fog Liquid Tank: Reservoir for smoke fluid.
- Bubble Wheel: Mechanism for generating bubbles.
- Bubble Oil Sink: Collects excess bubble fluid.
- LED RGB Lights: Integrated lighting for color effects.
- Fan: Disperses smoke and bubbles.
- DMX OUT/IN: 3-pole XLR ports for DMX512 control.
- POWER Switch: Main power toggle.
- POWER IN: Power cord connection.
5. Setup
-
Placement
Place the machine on a stable, flat surface. Ensure there is sufficient space around the unit for proper ventilation and to allow for the dispersion of smoke and bubbles. Keep it away from heat sources, flammable materials, and water.
-
Fill Bubble Fluid
Open the tank and add bubble fluid. The bubble fluid should not be too full; fill it to approximately 2/3 of the capacity.
Step 1: Adding bubble fluid. -
Fill Smoke Fluid
Pour the smoke oil into the smoke oil tank. Remember to add smoke oil in time to avoid damaging the machine. 1 liter of smoke oil can be used for approximately 1 hour.
Step 2: Adding smoke fluid. -
Power Connection
Plug the adapter cable into the fog machine's power input.
Step 3: Connecting power.
6. Operation
-
Initial Heating
After connecting the power, turn on the machine. The fog machine will begin to heat up. The first heating cycle takes approximately 3-5 minutes. Wait for the display to show "READY" before operating.
Step 4: Heating the machine. -
Control Methods
The machine offers multiple control options:
Control methods: Remote Control, LCD Display, DMX 512 Console. - Remote Control: Use the included wireless remote control (315MHz protocol, effective distance 10-30M) to activate smoke and bubble effects.
- Panel Control (LCD Display): Navigate settings and control functions directly from the machine's LCD display.
- DMX512 Console: For professional setups, connect a DMX512 console using 3-pole XLR cables to control the machine's 7 channels.
Step 5: Using the remote control. -
RGB Lighting
The machine features 18 RGB LEDs. These tri-color LEDs can be mixed to create a wide variety of vivid colors, enhancing the visual effects of the smoke and bubbles.
18 RGB LEDs allow for a wide range of color effects. -
Independent Smoke and Bubble Control
The machine supports independent control for smoke-only or bubble-only operation, allowing you to customize the effects as needed for your event.
Switch between bubble-only and fog-only modes.
7. Maintenance
- Fluid Replacement: Regularly check fluid levels and refill as needed. Do not let the tanks run dry during operation.
- Cleaning: Periodically clean the exterior of the machine with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Nozzle Cleaning: If the smoke output decreases or becomes inconsistent, clean the nozzle. Consult a qualified technician if you are unsure how to do this safely.
- Storage: When not in use, store the machine in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure fluid tanks are properly sealed.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No smoke output | No smoke fluid; machine not heated; clogged nozzle. | Check smoke fluid level and refill; wait for "READY" indicator; clean nozzle. |
| No bubble output | No bubble fluid; bubble wheel obstructed. | Check bubble fluid level and refill; inspect bubble wheel for obstructions. |
| Remote control not working | Remote battery low/dead; remote out of range; interference. | Replace remote battery; move closer to the machine; check for signal interference. |
| Machine not powering on | Power cord not connected; power switch off; power outage. | Ensure power cord is securely plugged in; turn on power switch; check power supply. |
9. Specifications
| Feature | Detail |
|---|---|
| Model | ZQ10142 |
| Shell Color | Black |
| Material | Plastic |
| Voltage | AC110V-240V 50/60Hz |
| Rated Power | 1500W |
| Light Source | 18PCS RGB LEDs |
| Control Protocol | Standard DMX512 protocol |
| Operation Mode | Remote control, Panel control, DMX |
| Remote Control Protocol | 315MHz |
| Effective Control Distance (Remote) | 10-30M |
| First Heating Time | 3-5 minutes |
| Cycle Heating Time | 45-60 seconds |
| Smoke Time | 2-3 minutes |
| Bubble Blowing Time | No preheat required, immediate operation |
| Bubble Oil Capacity | 2 liters (approx. 30 minutes usage) |
| Smoke Oil Capacity | 1 liter (approx. 1 hour usage) |
| Control Channels | 7 CH |
| Data Connection | 3-pole XLR input/output |
| Display | LCD display |
| Protection Grade | IP20 |
| Working Environment | -10℃ to 45℃ |
| Luminous Flux | 2000-82000 |
| Installation Method | Self-contained |
| Certification | CE |
10. User Tips
- Always use high-quality, compatible fluids to ensure optimal performance and longevity of your machine.
- For best visual effects, operate the machine in an area with minimal wind to prevent rapid dispersion of smoke and bubbles.
- Experiment with different RGB color combinations to match the mood and theme of your event.
- When using DMX control, ensure your DMX controller is properly configured for 7 channels.
11. Warranty and Support
This product is designed for reliability and performance. For any technical support or warranty inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
