VTOMAN X4

Contents

VTOMAN X4 Multi-functional Device User Manual

Model: X4

1. Introduction

The VTOMAN X4 is a versatile 4-in-1 multi-functional device designed for automotive emergencies and daily convenience. It integrates a powerful car jump starter, a 150PSI air compressor, a 10000mAh power bank, and a 100-lumen LED flashlight. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VTOMAN X4.

VTOMAN X4 4-in-1 device with jumper cables
The VTOMAN X4 device, showcasing its compact design and included jumper cables.

2. Safety Information

Please read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

  • Keep the device away from children.
  • Do not expose the device to rain or wet conditions.
  • Do not use the device if it is damaged or modified.
  • Ensure proper ventilation during use.
  • Do not short-circuit the jumper clamps.
  • Always connect the positive (+) clamp to the positive (+) terminal and the negative (-) clamp to the negative (-) terminal.
  • Disconnect the clamps from the car battery within 30 seconds after starting the vehicle.
  • Do not operate the air compressor continuously for more than 10 minutes to prevent overheating.
Diagram illustrating 10 smart safety protection features
The VTOMAN X4 features 10 smart safety protections, including Over Charge, Short Circuit, Spark Proof, Reverse Polarity, and Over-Current Protection.

3. Product Overview

The VTOMAN X4 combines multiple essential tools into one compact unit:

  • Car Jump Starter: 2500A peak current, capable of starting 12V vehicles with up to 8.5L gasoline or 6.0L diesel engines.
  • Air Compressor: 150PSI inflation pressure range, suitable for car tires, motorcycles, bicycles, and sports equipment. Features preset pressure value.
  • Power Bank: 10000mAh capacity with USB-A (Output: 5V/2.1A) and USB-C (Input: 5V/2A) ports for charging electronic devices.
  • LED Flashlight: 100 lumens with 3 lighting modes: Steady, SOS, and Strobe.
Overview of VTOMAN X4 features including jump start, air compressor, power bank, and LED light
Key features of the VTOMAN X4 device.

4. Specifications

Category Detail
General Brand: VTOMAN
Type: Car Jump Starter
Model: X4
Color: Black
Specification Battery Capacity: 37Wh
Starting Current: 400A
Peak Current: 2500A
USB-C Input: 5V/2A
USB-A Output: 5V/2.1A
Operating Temp: -20℃~60℃ (-4℉~140℉)
Life Time: >1000 Cycles
Full Charge Time: About 4.35 hours (5V/2A Charger)
Inflation Pressure Range: 150PSI
GAS Engine Rating: 8.5L
Diesel Engine Rating: 6L
Lighting Mode: Lighting / SOS mode / Strobe
Weight & Size Product Weight: 1.4kg
Package Weight: 1.5kg
Product Size: 7.48 x 4.59 x 2.13 inches
Package Size: 9.85 x 5.91 x 5.12 inches
Diagram showing product dimensions in inches
Product dimensions: 7.48 inches (height) x 4.59 inches (width).

5. Setup and Charging the Device

5.1 Initial Charge

Before first use, fully charge your VTOMAN X4. Connect the included USB-C cable to the USB-C input port on the device and to a 5V/2A charger (not included). The display will indicate charging status. A full charge takes approximately 4.35 hours.

5.2 Checking Battery Level

The device features a digital display that shows the current battery level. Ensure the device is sufficiently charged before attempting to jump start a vehicle or inflate tires.

6. Operating Instructions

6.1 Jump Starting a Vehicle

Follow these steps to safely jump start your vehicle:

  1. Insert the Jumper Cable: Plug the smart jumper cable into the jump starter port on the VTOMAN X4. Ensure a secure connection.
  2. Connect to Car Battery: Attach the red (+) clamp to the positive (+) terminal of your car battery and the black (-) clamp to the negative (-) terminal.
  3. Start Your Car: Once connected, the smart cable will indicate readiness. Start your car engine within 30 seconds.
  4. Remove Clamps: After the engine starts, immediately remove the jumper clamps from the car battery, then disconnect the smart jumper cable from the VTOMAN X4.
Four-step visual guide for vehicle starting operation
Visual guide for jump starting a vehicle: 1. Insert jumper cable, 2. Connect to car battery, 3. Start engine, 4. Remove clamps.

6.2 Using the Air Compressor

The VTOMAN X4 can inflate tires and other inflatables up to 150PSI.

  1. Connect Hose: Screw the inflation hose onto the tire valve stem.
  2. Select Mode/Set Pressure: Turn on the device. Use the control buttons to select the desired inflation mode (Car, Motorcycle, Bicycle, Basketball) or manually set the target pressure.
  3. Start Inflation: Press the start button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
  4. Disconnect: Unscrew the hose from the valve stem.
Image showing the VTOMAN X4 inflating a car tire with preset pressure values for different modes
The VTOMAN X4 functions as a cordless tire inflator with preset pressure values for various applications.

6.3 Using as a Power Bank

To charge your electronic devices:

  • Connect your device's charging cable to the USB-A output port (5V/2.1A) on the VTOMAN X4.
  • The VTOMAN X4 will automatically begin charging your device.
VTOMAN X4 acting as a 10000mAh power bank, charging a smartphone and tablet
The 10000mAh power bank feature allows charging of mobile devices via USB-A output.

6.4 Using the LED Flashlight

The built-in LED flashlight has three modes:

  • Steady Light: For general illumination.
  • SOS Mode: Emits an SOS signal for emergencies.
  • Strobe Mode: Flashing light for signaling or attracting attention.

Press the flashlight button to cycle through the modes.

Close-up of the VTOMAN X4 showing the 100 lumens LED light with SOS, Normal, and Strobe modes
The 100-lumen LED light offers three modes for various situations.

7. Maintenance

  • Cleaning: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the VTOMAN X4 in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the device is charged to at least 50% before long-term storage and recharge every 3-6 months to maintain battery health.
  • Battery Life: The device is designed for over 1000 charge cycles and offers a 24-month standby time.
Image indicating 24 month standby time for the VTOMAN X4
The VTOMAN X4 boasts an extended 24-month standby period.

8. Troubleshooting

  • Device not turning on: Ensure the device is charged. If not, connect it to a charger.
  • Vehicle not starting:
    • Check that the jumper clamps are securely connected to the correct battery terminals (red to positive, black to negative).
    • Ensure the car battery voltage is not extremely low (below 1V).
    • The vehicle's engine size might exceed the device's capacity (8.5L Gas / 6L Diesel).
    • Allow the device to cool down if it has been used multiple times in quick succession.
  • Air compressor not inflating:
    • Check that the inflation hose is securely attached to both the device and the tire valve.
    • Ensure the target pressure is set correctly.
    • The compressor may have overheated; allow it to cool down.
  • Device not charging other electronics: Ensure the USB cable is properly connected and the electronic device is compatible with 5V/2.1A output.

9. User Tips

No specific user tips from reviews or Q&A are available at this time.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official VTOMAN website or contact your retailer. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.