1. Introduction
Thank you for choosing the BUVAYE N1 Multi-functional Device. This product combines a powerful car jump starter, a portable air pump, a power bank, and an emergency LED light, making it an essential tool for any vehicle owner. Designed for convenience and reliability, it ensures you are prepared for various roadside emergencies. Please read this manual thoroughly before use to ensure safe and optimal operation.
2. Safety Information
Your safety is paramount. Please observe the following precautions:
- Ensure the product's power level is above 75% for optimal jump-starting performance. Performance may decline with lower power levels.
- During continuous inflation, the pump will generate heat. Do not inflate continuously for more than 10 minutes to prevent overheating. Allow a 5-8 minute cooling period between uses.
- For safety, do not expose the product directly to sunlight for extended periods or use it in humid conditions, as this may damage the mainboard and cause a short circuit.
- Keep the device away from children.
- Do not disassemble the device. Refer all servicing to qualified personnel.
Intelligent Protective Ignition Clamp
The intelligent protective ignition clamp is designed with multiple safety features:
- High Voltage Protection
- Low Voltage Protection
- High Temperature Protection
- Low Temperature Protection
- Short-circuit Protection
- Power Failure Protection
- Reverse Charging Protection
- Vibration Protection
3. Package Contents
Please check the package for the following items:
- BUVAYE N1 Jump Starter Unit x 1
- Smart Clamps x 1
- Inflatable Trachea (Air Hose) x 1
- Air Valves (Nozzle Adapters) x 4
- USB-C Charging Cable x 1
- Storage Box x 1
- User Manual x 1
4. Product Overview
The BUVAYE N1 is a versatile device designed for automotive and general utility. It features:
- Car Jump Starter: Capable of starting 12V vehicles with up to 8.0L gasoline and 5.0L diesel engines.
- Portable Air Pump: Dual-display digital air pump with preset tire pressure and auto-stop function, suitable for cars, motorcycles, electric vehicles, bicycles, and balls.
- Power Bank: Equipped with QC3.0 fast charging via USB output to charge mobile phones, tablets, and headphones.
- LED Lighting: Features emergency continuous lighting, exploration/pathfinder mode, and an alarm SOS mode for emergencies.
- Intelligent Temperature Control: Compatible with a wide temperature range from -20°C to 60°C.
5. Setup Instructions
5.1. Jump Starting a Vehicle
Follow these steps to jump-start your vehicle:
- Connect the Wire Clamp to the Power Supply: Insert the blue port of the smart clamps into the designated port on the jump starter unit.
- Connect to the Battery Terminals: Clip the red clamp to the positive (+) terminal of the vehicle battery. Clip the black clamp tightly to the negative (-) terminal of the vehicle battery.
- Start the Engine: Get into the car and start the engine. The car should start within 30 seconds.
- Remove Clamps: After the car starts, immediately remove the smart clamps from the vehicle battery and then from the jump starter unit.
5.2. Using the Portable Air Pump
To inflate tires or other items:
- Connect Inflation Hose: Connect the inflation tube to the device and attach the appropriate nozzle adapter to the item you wish to inflate.
- Turn On and Select Mode: Press and hold the power button to turn on the device. Click the mode selection button to choose the inflation mode (e.g., car, motorcycle, bicycle, ball).
- Adjust Pressure: Use the '+' and '-' buttons to adjust the preset tire pressure to your desired level.
- Start Inflation: Click the inflation button to begin inflation. The device will automatically stop when the preset pressure is reached. Click again to turn off inflation manually if needed.
6. Operating Instructions
6.1. Power Bank Function
To use the device as a power bank:
- Connect your mobile phone, tablet, or other USB-powered device to the USB output port using a compatible charging cable.
- The device will automatically begin charging. It supports QC3.0 fast charging for compatible devices.
6.2. LED Lighting
The device features multiple lighting modes for various situations:
- Emergency Lighting: Provides continuous illumination for general use, exploration, or as a pathfinder.
- Alarm SOS Mode: Flashes alternately to signal for assistance in emergency situations.
Refer to the device's buttons for cycling through lighting modes.
7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage box for protection.
- Charging: Recharge the device periodically, even when not in use, to maintain battery health. It is recommended to fully charge it every 3-6 months.
- Battery Care: Avoid fully discharging the battery frequently to prolong its lifespan.
8. Troubleshooting
- Device Not Turning On: Ensure the device is sufficiently charged. Connect it to a power source using the USB-C cable and allow it to charge for a few hours.
- Jump Starter Not Working:
- Check if the device's power level is above 75%.
- Ensure the smart clamps are correctly and securely connected to the vehicle battery terminals (red to positive, black to negative).
- Verify that the smart clamps are fully inserted into the jump starter unit.
- If the vehicle does not start within 30 seconds, disconnect the clamps, wait a few minutes, and try again.
- Air Pump Not Inflating:
- Check if the inflation hose is securely connected to both the device and the item to be inflated.
- Ensure the correct pressure unit and target pressure are set on the display.
- If the pump stops prematurely, check for overheating and allow a cooling period.
- Charging Other Devices Slowly: Ensure your device and cable support QC3.0 fast charging. If not, charging speed will be standard.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | BUVAYE |
| Model | N1 |
| Battery Type | Lithium Polymer |
| Battery Capacity | 10000mAh |
| Rated Voltage | 14.8V |
| Peak Current | 2000A (>1200 A) |
| Vehicle Voltage | 12 V |
| Conversion Rate | >90% |
| Number Of Built-in Batteries | 4 |
| Max Inflation Pressure | 150PSI |
| Pressure Units | PSI, BAR, KPA, KG/CM² |
| Pump Cylinder Diameter | 22mm |
| Air Volume | 25L/min |
| Charging Time | 4-5 hours |
| Special Features | USB, Lighting, Warning Light, SOS Lighting |
| Other Features | Power Bank, LED Light, Hand-Held Design |
| External Testing Certification | MSDS, ROHS, CE, UL |
| High-concerned chemical | None |
10. User Tips
- For optimal jump-starting, always ensure the device's battery is charged above 75%.
- When using the air pump, if inflating for more than 10 minutes, allow a 5-8 minute cool-down period to prevent overheating and prolong the device's life.
- Store the device in its provided case to protect it from dust and physical damage.
- Regularly check the tire pressure of your vehicle, not just in emergencies, to ensure safety and fuel efficiency.
11. Warranty and Support
This product comes with a 1-year warranty service. If you encounter any issues with the product, such as battery damage or the product not functioning correctly, please contact the seller for assistance. The warranty covers manufacturing defects and functional failures under normal use.
