1. Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ATTACK SHARK X82Pro HE Magnetic Wireless Gaming Keyboard. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Product Features
- Magnetic Axis Technology: Experience 0.01mm full-range precision triggering with customizable actuation sensitivity, ideal for various gaming scenarios.
- 8K High Polling Rate: Achieve pro-level competitive responsiveness with an 8000Hz polling rate in wired mode, ensuring zero input delay. Wireless 2.4G mode offers 1000Hz polling rate.
- Tri-Mode Wireless Connectivity: Connect via 2.4G wireless, Bluetooth 5.0, or USB Type-C wired modes, compatible with PC, PS5, and Mac.
- Dynamic RGB Lighting: Personalize your setup with 16.8 million customizable colors, programmable effects, and audio synchronization.
- Hot-Swappable Design: Easily replace magnetic and mechanical switches for DIY customization and enhanced typing feel.
- Advanced Internal Structure: Features PO sandwich cotton and base cotton for superior sound dampening and a refined acoustic experience.
- Ultra-Low Latency: Achieves an event-level delay of 0.1ms, supported by a 128K scanning sampling rate and high-frequency gaming-grade chips.
- Long-Lasting Battery: Equipped with a 5000mAh battery, providing extended usage, up to 30 days with lighting off.
- Web-Based Driver: Configure macros and settings via www.qmk.top, eliminating the need for software installation.
3. Package Contents
Please check the package for the following items:
- ATTACK SHARK X82Pro HE Keyboard
- USB Type-C Cable
- 2.4G Wireless Receiver
- Keycap Puller (for hot-swapping)
- User Manual (this document)
4. Setup Guide
4.1. Initial Charging
Before first use, it is recommended to fully charge the keyboard. Connect the provided USB Type-C cable to the keyboard's Type-C port and the other end to a USB power source (e.g., computer, wall adapter).
4.2. Connection Modes
The X82Pro HE keyboard supports three connection modes:
- Wired Mode (USB Type-C): Connect the keyboard directly to your device using the USB Type-C cable. This mode provides the highest polling rate (8000Hz) and lowest latency (0.1ms).
- 2.4G Wireless Mode:
- Plug the 2.4G wireless receiver into an available USB port on your computer.
- Switch the keyboard's mode selector to 2.4G. The keyboard should automatically connect.
- Bluetooth Mode:
- Switch the keyboard's mode selector to Bluetooth.
- On your device (PC, PS5, Mac, Tablet), search for Bluetooth devices and select "ATTACK SHARK X82Pro HE" to pair.
5. Operating Instructions
5.1. RGB Backlight Control
The keyboard features dynamic RGB backlighting. Use the following FN key combinations to control the lighting effects:
| Key Combination | Function |
|---|---|
| FN + \ | | Backlight effect switching |
| FN + : ; | Keyboard light switch / Triggering mode switch |
| FN + [ { | Backlight brightness - |
| FN + ] } | Backlight brightness + |
| FN + - _ | Backlight speed - |
| FN + = + | Backlight speed + |
| FN + Enter | Main backlight color switching |
| FN + Caps | Switch the light mode of the luminous strip |
5.2. Customizing Actuation and Macros
The X82Pro HE keyboard supports web-based driver adjustment for customizing key functions, actuation points, and macros. No software installation is required.
- Visit www.qmk.top in your web browser.
- Follow the on-screen instructions to connect your keyboard and access the customization interface.
- Adjust actuation sensitivity (0.01mm precision), set rapid trigger, and configure macros for a personalized gaming experience.
Note on Dead Zone: To prevent accidental key triggers from minor environmental factors, a small dead zone (e.g., 0.1mm) is recommended. This can be manually set via the web driver.
6. Maintenance
6.1. Cleaning the Keyboard
- Disconnect the keyboard from all devices before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
- For deeper cleaning, use a keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Avoid using harsh chemicals, abrasives, or solvents as they may damage the keyboard's finish.
6.2. Hot-Swapping Switches
The X82Pro HE supports hot-swappable magnetic switches. To replace switches:
- Carefully remove the keycap using the provided keycap puller.
- Gently pull the switch upwards to remove it from the PCB.
- Align the pins of the new switch with the holes on the PCB and press down firmly until it clicks into place.
- Reattach the keycap.
Caution: Ensure the keyboard is disconnected before hot-swapping switches to prevent damage.
7. Troubleshooting
- Keyboard not responding:
- Ensure the keyboard is charged.
- Check the connection mode (wired, 2.4G, Bluetooth) and ensure it matches your device's connection.
- For wired mode, try a different USB port or cable.
- For 2.4G, ensure the receiver is properly plugged in.
- For Bluetooth, re-pair the device.
- Keys not registering or double-typing:
- Clean under the affected keycap.
- Consider hot-swapping the switch for a new one.
- Adjust the actuation point and dead zone settings via the web driver (www.qmk.top).
- RGB lighting not working:
- Ensure the keyboard is powered on.
- Check FN key combinations for lighting control (refer to section 5.1).
- Verify settings in the web-based driver.
- Wireless connection issues:
- Ensure the keyboard is within range of the receiver/device.
- Minimize interference from other wireless devices.
- Re-pair Bluetooth or re-plug the 2.4G receiver.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Attack Shark |
| Model | X82Pro HE |
| Keycup Material | PBT plastic (double-shot injection, five-sided thermal sublimation) |
| Switches | Magnetic (Hot-swappable) |
| Backlight Type | Multicolor (RGB, 16.8 million colors) |
| Interface Type | USB Type-C (wired), 2.4G Wireless, Bluetooth Wireless |
| Battery Capacity | 5000mAh |
| Operation Style | Mechanical |
| Language | English |
| Keyboard Standard | Mini Keyboard (75% layout) |
| Application | Desktop, Laptop, Tablet, PC, PS5, Mac |
| Origin | Mainland China |
| Certification | CE |
| Weight | Approx. 780g ± 10g (excluding wire) |
| Dimensions (W x L x H) | 145mm x 330mm x 40mm |
| Wired Return Rate | 8000Hz |
| Wireless Return Rate (2.4G) | 1000Hz |
| Shaft Body Accuracy | 0.01mm |
| Driver Support | Dual drivers for PC and web pages (www.qmk.top) |
9. User Tips
- Experiment with Actuation: Take advantage of the 0.01mm adjustable actuation to find the perfect sensitivity for different games or typing tasks. A lower actuation point can provide faster response in competitive gaming.
- Utilize Web Driver: Regularly check the web-based driver at www.qmk.top for firmware updates or new customization options.
- Battery Management: To maximize battery life, consider turning off RGB lighting when not needed, especially during extended wireless use.
- Switch Customization: Explore different magnetic switches if you desire a different typing feel or sound profile, thanks to the hot-swappable design.
10. Warranty and Support
For warranty information and technical support, please refer to the official Attack Shark website or contact your retailer. Keep your proof of purchase for warranty claims.
For further assistance, you may also visit the web-based driver portal at www.qmk.top for FAQs and community support.
