1. Introduction
The Flipsky FT85BD is a high-performance Double Drive Electronic Speed Controller (ESC) designed for electric skateboards, scooters, and e-bikes. It supports PPM signal input and features an aluminum case for enhanced durability and heat dissipation. This manual provides essential information for the safe and effective use of your FT85BD ESC.
2. Specifications
| Feature | Specification |
|---|---|
| Firmware | V1.2 or above (firmware update via Flipsky ESC Tool supported) |
| Voltage Range | 14-84V (safe for 4S-20S Lipo) |
| Continuous Current | 100A / Single; 200A / Dual (values depend on mounting and ambient temperature) |
| Peak Current | 250A / Single; 500A / Dual |
| Communication Ports | USB, CAN, UART, PPM, ADC |
| Input Signals Support | PPM, ADC, UART (compatible with FLIPSKY remote VX4 and VX3Pro only) |
| Startup Modes Support | IPDS (sensorless), HFPI (sensorless), HALL (sensored) |
| BEC Output | 5V@1A |
| Multiple Speed Gear Levels | Low, Medium, High, Reverse |
| Lights & Horn Support | Front Lights, Rear Brake Lights & Horn |
| Programmable | Yes |
| Regenerative Capacity | Yes |
| Smart Switch Function | Slide Poweron & Auto shutdown |
| Power Button Diameter | 16mm (Self-resetting switch with green LED) |
| Power Wire Size | 10AWG |
| Motor Wire Size | 12 AWG |
| Dimensions (L*W*H) | 132mm * 81mm * 26.5mm (Including Aluminum Case) |
| USB Voltage Range | 5-20V DC |
| Charger Included | No |
| Battery Included | No |
| Output Voltage (Adjustable) | 5.0V (default) / 6.0V / 7.4V / 8.4V (4-10V adjustable) |
| Output Current (Continuous) | 20A (duration depends on external heat dissipation) |
3. Features
- Equipped with CPU AT32F403ARCT7 (ARM Cortex-M4 structure) for high clock speed.
- 240MHz CPU clock speed and max PWM switching frequency of 45KHz for improved motor RPM.
- Programmable via Flipsky ESC Tool for compatibility with various motor types, battery voltages, and control methods.
- Programmable via Flipsky remote controller VX4 (firmware version VX4_V1.2.1 or above).
- Supports motor FOC (Field-Oriented Control) for low working noise and smooth starting.
- Provides real-time data and fault alerts.
- Adaptive variable PWM frequency control.
- Supports sensor mode (HALL) and sensorless modes (IPDS, HFPI).
- Supports Current and Duty Cycle control types.
- Comprehensive protection functions: low/high voltage, over-current, abnormal temperature, MOSFET over-temperature/over-current, battery over-discharge, motor over-temperature.
- Integrated smart switch function with slide power-on and adjustable automatic shutdown via Flipsky ESC Tool.
- Extra interfaces for front lights, brake lights, and horn fixtures.
4. Package Contents
The standard package includes the following components:
- Flipsky FT85BD Double Drive ESC Unit
- Various wiring harnesses for connections (PPM, UART, CAN, ADC, Hall sensors, Power Switch, Lights, Horn)
- USB Cable for PC connection


5. Product Overview and Dimensions
The FT85BD ESC features a robust aluminum case for durability and efficient heat dissipation. Below are the key dimensions and a top-down view of the unit.


6. Setup
6.1 Wiring Connections
Carefully follow the wiring diagrams below to connect your FT85BD ESC to your motors, battery, and other accessories. Ensure all connections are secure and correctly oriented to prevent damage.


6.2 Software Setup and Firmware Update
The FT85BD ESC is programmable via the Flipsky ESC Tool. This tool allows for configuration of motor parameters, battery settings, and control methods. It also supports firmware updates to ensure your ESC is running the latest version (V1.2 or above is recommended).
- Connect the ESC to your computer using the provided USB cable.
- Download and install the Flipsky ESC Tool from the official Flipsky website.
- Follow the on-screen instructions within the software to configure your ESC and update firmware if necessary.

6.3 Optional Bluetooth Module Connection
For wireless configuration and monitoring, an optional Bluetooth module can be connected to the UART port. Ensure the module is compatible with the Flipsky ESC Tool or your chosen mobile application.

7. Operating Instructions
7.1 Power On/Off
- Slide Power-on: The ESC supports a slide power-on feature. Simply push your electric vehicle forward to activate the ESC.
- Power Button: Press the connected 16mm self-resetting switch with the green LED button to turn the ESC on or off.
- Automatic Shutdown: The ESC has an adjustable automatic shutdown function. This can be configured via the Flipsky ESC Tool to power off after a period of inactivity.
7.2 Control Modes
The FT85BD supports various control types and startup modes:
- Control Types: Current, Duty Cycle. These can be selected and configured through the Flipsky ESC Tool.
- Startup Modes: IPDS (sensorless), HFPI (sensorless), HALL (sensored). Choose the appropriate mode based on your motor type and preference.
7.3 Speed Gear Levels
The ESC supports multiple speed gear levels: Low, Medium, High, and Reverse. These settings are typically controlled via your remote controller (e.g., Flipsky VX4) and can be fine-tuned in the Flipsky ESC Tool.
7.4 Lights and Horn
If connected, the front lights, rear brake lights, and horn can be controlled through the ESC. Refer to your remote controller's manual for specific button assignments or configure through the Flipsky ESC Tool.
8. Maintenance
- Keep Clean: Regularly clean the ESC and its surroundings to prevent dust and debris buildup, which can affect cooling.
- Check Connections: Periodically inspect all wiring connections for looseness or damage. Secure any loose connections.
- Temperature Monitoring: While the ESC has over-temperature protection, avoid operating it in conditions that consistently push it to its thermal limits. Ensure adequate airflow around the unit.
- Firmware Updates: Keep the ESC firmware updated to benefit from performance improvements and bug fixes.
9. Troubleshooting
- ESC Not Powering On:
- Check battery connections and ensure the battery is charged.
- Verify the power switch is correctly wired and functioning.
- Motor Not Spinning / Irregular Operation:
- Ensure motor phase wires and Hall sensor wires (if applicable) are correctly connected.
- Check motor configuration in the Flipsky ESC Tool.
- Verify input signal (PPM, UART) from your remote controller.
- Bluetooth Not Working:
- Ensure the Bluetooth module is correctly connected to the UART port.
- Verify the Bluetooth module is powered on and discoverable.
- Check for correct UART settings in the Flipsky ESC Tool.
- Try restarting both the ESC and your mobile device.
- Fault Alerts: The ESC supports real-time data and fault alerts. If an alert occurs, connect to the Flipsky ESC Tool to diagnose the specific error (e.g., low/high voltage, over-current, over-temperature).
10. User Tips
- Advanced Power Configuration: For users seeking to optimize power output for specific applications (e.g., circuit racing), the Flipsky ESC Tool offers extensive configuration options. Adjusting motor current limits, battery current limits, and other advanced parameters can significantly impact performance. Always make small adjustments and test thoroughly to avoid damaging components.
- Firmware Updates: Regularly check the official Flipsky website for new firmware versions. Updates often include performance enhancements, new features, and bug fixes.
- Heat Management: While the aluminum case aids in heat dissipation, consider additional cooling solutions (e.g., heatsinks, active cooling) if operating the ESC at its continuous or peak current limits for extended periods, especially in high ambient temperatures.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or Flipsky customer service directly. Keep your purchase receipt as proof of purchase.