1. Introduction
The KJ103 Digital Multimeter is an effortless, fully automatic, and pocket-sized tool designed for both beginners and home use. It offers high precision measurements for various electrical parameters, making it perfect for general electrical testing and troubleshooting.

Figure 1: KJ103 Digital Multimeter
2. Key Features
- High Precision: Provides accurate and intuitive readings with a VA Extra-Large LCD Display.
- Fully Automatic & Auto Range: Simplifies operation by automatically selecting the correct measurement range.
- Versatile Measurements: Capable of measuring AC/DC Voltage (up to 600V), AC/DC Current (up to 10A), Resistance (up to 20MΩ), Capacitance (up to 2000μF), Continuity, and Diode.
- Non-Contact Voltage (NCV) Detection: Enhances safety by detecting AC voltage without physical contact.
- Durable Design: Features a PVC anti-drop protective case and durable silicone buttons.
- Convenient Functions: Includes Data Hold, Auto Power Off, and an integrated LED light for working in dimly lit areas.
- Compact and Portable: Designed for easy handling and transport.
- Certifications: CE, RoHS compliant.

Figure 2: Key Advantages of the KJ103 Multimeter
3. Package Contents
Upon opening your KJ103 Digital Multimeter package, please ensure all items are present and in good condition:
- 1 x KJ103 Digital Multimeter
- 1 x Pair of Test Leads (Red and Black)
- 1 x Specification Sheet / Operating Manual
- 1 x Packaging Box

Figure 3: What's included in the box
4. Controls and Display
Familiarize yourself with the multimeter's controls and display elements:
- VA Screen: Large LCD display for clear readings.
- Power Button: Turns the device ON/OFF.
- FUN Button: Cycles through different functions within a measurement mode (e.g., AC/DC, Resistance/Continuity/Diode).
- H (Hold) Button: Short press to hold the current reading on the display.
- NCV Button: Short press to activate Non-Contact Voltage detection. Long press to turn on/off the LED light.
- Input Jacks:
- A mA: Input for current measurements (up to 10A).
- COM: Common (negative) input for all measurements.
- INPUT: Positive input for voltage, resistance, capacitance, continuity, and diode measurements.

Figure 4: Front Panel Layout and Functions
5. Setup
5.1. Battery Installation
The KJ103 Multimeter requires 2x 1.5V AA batteries (not included). To install or replace batteries:
- Ensure the multimeter is powered off and disconnect all test leads from the device and any circuits.
- Locate the battery compartment on the back of the multimeter.
- Use a coin or appropriate tool to open the battery cover.
- Insert two 1.5V AA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
- Close the battery cover securely.
WARNING: To avoid electrical shock, remove test leads from the circuit before opening the battery cover.

Figure 5: Battery Compartment
5.2. Powering On/Off
Press the Power button to turn the multimeter ON. The display will light up. The device features an Auto Power Off function to conserve battery life.
6. Operating Modes
The KJ103 is a smart multimeter with auto-ranging capabilities, simplifying most measurements. For voltage, resistance, continuity, capacitance, and diode tests, you typically do not need to manually select a specific range.
6.1. Automatic Measurement (Voltage, Resistance, Continuity, Diode, Capacitance)
- Connect the red test lead to the 'INPUT' jack and the black test lead to the 'COM' jack.
- Power on the multimeter. It will automatically enter auto-recognition mode (indicated by 'AUTO APO' on the display).
- Apply the test probes to the circuit or component you wish to measure. The multimeter will automatically detect the type of measurement (AC/DC Voltage, Resistance, Continuity, Diode, Capacitance) and display the reading.
- Use the 'FUN' button to cycle between AC and DC voltage if needed, or to switch between resistance, continuity, and diode test results.
6.2. Non-Contact Voltage (NCV) Detection
- Short press the 'NCV' button to activate NCV mode. The display will show 'EF'.
- Move the top end of the multimeter close to an AC voltage source (e.g., a live wire or outlet).
- The multimeter will indicate the presence of AC voltage through audible beeps and visual alerts on the display.
6.3. LED Light
Long press the 'NCV' button to turn the integrated LED light ON or OFF. This is useful for illuminating dark work areas.

Figure 6: Multimeter with LED Light in use
6.4. Data Hold
During any measurement, short press the 'H' button to freeze the current reading on the display. Press 'H' again to release the hold function.
6.5. Demonstration Video
Watch this video for a visual demonstration of the KJ103 Multimeter's functions, including voltage, resistance, continuity, capacitance, diode, and NCV tests, as well as the LED light operation.
Video 1: KJ103 Digital Multimeter Function Demonstration
7. Maintenance
7.1. Cleaning
To clean the multimeter, wipe the case with a damp cloth and a mild detergent. Do not use abrasives or solvents. Ensure the device is powered off and dry before use.
7.2. Battery Replacement
When the battery indicator appears on the display, replace the batteries as described in the 'Battery Installation' section (5.1). Always use fresh 1.5V AA batteries.
8. Troubleshooting
- No Display/Power On: Check battery installation and ensure batteries are not depleted.
- Incorrect Readings: Verify test lead connections, ensure probes are making good contact, and check if the component being measured is functioning correctly.
- 'OL' or 'OVERLOAD' on Display: This indicates the measurement is outside the multimeter's range. Disconnect immediately to prevent damage.
- Slow Response: Low battery can affect performance. Replace batteries if necessary.
9. Specifications
| Function | Range | Accuracy |
|---|---|---|
| DC Voltage | 1.1V - 600V | ±(0.5%+3) |
| AC Voltage | 1.1V - 600V | ±(1.0%+3) |
| DC Current | 1mA - 10A | ±(2.0%+4) |
| AC Current | 1mA - 10A | ±(2.0%+4) |
| Resistance | 0Ω - 19.99MΩ | ±(1.5%+3) |
| Capacitance | 0 - 2000μF | |
| Continuity Test | Yes | |
| Diode Test | Yes | |
| LED Light | Yes | |
| NCV | Yes | |
| Auto Power Off | Yes | |
| True RMS | Yes | |
| Data Hold | Yes | |
| Backlight | Yes | |
| Display Type | Digital Display (3 1/2 digits, max 1999) | |
| Operating Mode | Auto Range | |
| DIY Supplies | Electrical | |
| Certification | CE, RoHS | |
| Origin | Mainland China |
Dimensions: Approximately 14cm (5.51in) x 6.8cm (2.68in) x 3.6cm (1.42in).

Figure 7: Product Dimensions
10. User Tips
- For quick checks, the auto-ranging feature is highly convenient, eliminating the need to manually select modes.
- Always ensure a firm connection with the test leads to get accurate readings.
- The NCV function is excellent for quickly identifying live wires without direct contact, enhancing safety.
- Utilize the built-in LED light when working in poorly lit environments to improve visibility.
11. Safety Information
Always adhere to basic safety precautions when using electrical testing equipment to reduce the risk of fire, electric shock, or personal injury.
- Read and understand all instructions before using the multimeter.
- Do not use the multimeter if it appears damaged or if the test leads are frayed.
- Never apply voltage or current that exceeds the maximum rated values for the multimeter.
- Be cautious when working with voltages above 30V AC RMS, 42V peak, or 60V DC. These voltages pose a shock hazard.
- Always disconnect the test leads from the circuit before changing batteries or opening the case.
- Do not operate the multimeter in explosive gas, vapor, or dust environments.
- Ensure your hands are dry and you are standing on an insulated surface when taking measurements.
12. Warranty and Support
For any questions, technical support, or warranty claims, please refer to the contact information provided by your retailer or the manufacturer. Keep your purchase receipt as proof of purchase.