1. Introduction and Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your JONSBO CA40, CA80, or CA90 CPU Air-Cooled Cooler. Designed for high-performance cooling, these radiators feature multiple heat pipes and quiet fans to ensure optimal thermal management for your processor. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
Figure 1.1: JONSBO CA Series CPU Air-Cooled Cooler (Example: CA40)
For a complete and detailed user manual in PDF format, please refer to the official document: User manual (PDF).
2. Safety Information
Always observe the following safety precautions to prevent damage to the product or injury to yourself:
- Ensure your computer system is powered off and unplugged from the wall outlet before installation or maintenance.
- Handle components with care to avoid electrostatic discharge (ESD) damage. Consider using an anti-static wrist strap.
- Do not touch the fan blades while the cooler is operating.
- Keep the cooler away from liquids and excessive moisture.
- Ensure proper ventilation around your computer case to prevent overheating.
- If you are unsure about any installation step, consult a qualified technician.
3. Package Contents
Verify that all components are present in your package:
- JONSBO CA Series CPU Air Cooler (Heatsink with pre-attached fan)
- Mounting Brackets for Intel (LGA 1150, 1151, 1155, 1156, 1200, 1700)
- Mounting Brackets for AMD (Socket AM4, AM5)
- Thermal Paste
- Screws and accessories kit
- User Manual (this document and/or PDF)
Figure 3.1: Cooler unit with fan, ready for installation.
4. Specifications
Key technical specifications for the JONSBO CA Series CPU Air-Cooled Cooler:
| Feature | Specification |
|---|---|
| Model Number | CA40, CA80, CA90 |
| Cooler Type | Tower |
| Heatpipes | 4 |
| Supported CPU Sockets | LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA1200, LGA 1700, Socket AM5, AM4 |
| TDP (Thermal Design Power) | 225W |
| Fan Speed | 800 - 1800rpm |
| Power Interface | 4PIN (PWM), 5v-3pin ARGB |
| Fan Life | 100,000 hrs |
| Certification | CE, RoHS |
| Blade Quantity | 9 |
| Bearing Type | Fluid Bearing |
| Air Volume | 69.61 CFM |
| Air Pressure | 1.79 mmH2O |
| Noise Level | 30dBA (Max) |
| Fan Size | 120mm |
| Package Dimensions (Approx.) | 22cm (L) x 20cm (W) x 18cm (H) |
| Package Weight (Approx.) | 1.599 kg |
Figure 4.1: Illustrative diagram of cooler dimensions and socket compatibility.
5. Installation Guide
Follow these general steps for installing your JONSBO CPU cooler. Specific details may vary slightly depending on your CPU socket (Intel or AMD). Refer to the detailed PDF manual for comprehensive, step-by-step instructions and diagrams.
5.1. Preparation
- Power off your computer and unplug it from the power source.
- Open your computer case and locate the CPU socket.
- Remove any existing CPU cooler and clean the CPU surface thoroughly with isopropyl alcohol to remove old thermal paste.
- Identify the correct mounting brackets for your CPU socket (Intel or AMD).
5.2. Mounting the Backplate and Stand-offs
- Attach the appropriate backplate to the rear of your motherboard, aligning it with the CPU cooler mounting holes.
- Secure the stand-offs through the motherboard from the front, screwing them into the backplate.
5.3. Applying Thermal Paste
- Apply a small, pea-sized amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it evenly.
5.4. Installing the Heatsink
- Carefully place the heatsink onto the CPU, aligning the mounting holes on the cooler's base with the stand-offs.
- Secure the heatsink using the provided mounting screws, tightening them in a diagonal pattern until snug. Do not overtighten.
5.5. Connecting the Fan and ARGB Cables
- Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard.
- If your cooler has ARGB lighting (5v-3pin), connect the ARGB cable to a compatible 5V 3-pin ARGB header on your motherboard or an ARGB controller.
Figure 5.1: Detail of the cooler's heatpipes and contact base, crucial for proper thermal paste application.
6. Operation
Once installed, the JONSBO CPU cooler operates automatically, with its fan speed controlled by the motherboard's PWM signal based on CPU temperature. The ARGB lighting, if connected, can be controlled via your motherboard's software or a dedicated ARGB controller.
6.1. Fan Control (PWM)
The 4-pin PWM connector allows your motherboard to dynamically adjust the fan speed (800-1800rpm) based on the CPU's thermal load. This ensures efficient cooling when needed and quieter operation during lighter tasks. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
6.2. ARGB Lighting Control
The 5v-3pin ARGB connector enables addressable RGB lighting. If connected to a compatible motherboard header, you can synchronize the cooler's lighting effects with other ARGB components in your system using the motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). Ensure you connect to a 5V ARGB header, not a 12V RGB header, to prevent damage.
Figure 6.1: JONSBO CA series cooler showcasing its ARGB lighting capabilities.
7. Maintenance
Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your JONSBO CPU cooler.
7.1. Dust Cleaning
- Periodically (every 3-6 months, depending on environment) power off your computer and unplug it.
- Use compressed air to blow dust out of the heatsink fins and fan blades. Hold the fan blades gently to prevent them from spinning too fast during cleaning, which can damage the bearings.
- For stubborn dust, a soft brush or microfiber cloth can be used.
7.2. Thermal Paste Reapplication
- It is recommended to reapply thermal paste every 2-3 years, or if you remove the cooler for any reason.
- Carefully remove the cooler, clean both the CPU IHS and the cooler's base thoroughly with isopropyl alcohol.
- Apply new thermal paste as described in the installation section.
Figure 7.1: Close-up of the fan, highlighting areas for dust cleaning.
8. Troubleshooting
If you encounter issues with your JONSBO CPU cooler, refer to the following common problems and solutions:
8.1. Fan Not Spinning or Spinning Slowly
- Check Connections: Ensure the 4-pin PWM fan cable is securely connected to the CPU_FAN header on your motherboard.
- BIOS Settings: Verify that fan control settings in your motherboard's BIOS/UEFI are configured correctly (e.g., not set to a very low RPM or disabled).
- Power Supply: Ensure your power supply is providing adequate power to the motherboard and components.
- Physical Obstruction: Check for any cables or debris obstructing the fan blades.
8.2. High CPU Temperatures
- Thermal Paste: Ensure thermal paste was applied correctly and evenly. Reapply if necessary.
- Heatsink Contact: Verify that the heatsink is making firm, even contact with the CPU. Check mounting screws for proper tightness.
- Airflow: Ensure your PC case has good airflow, with intake and exhaust fans properly oriented.
- Dust Buildup: Clean any dust from the heatsink fins and fan blades (refer to Maintenance section).
- Overclocking: If overclocking, ensure your CPU voltage and clock speeds are stable and within safe limits for your cooler's TDP (225W).
8.3. ARGB Lighting Not Working
- Check Connection: Ensure the 5v-3pin ARGB cable is securely connected to a compatible 5V ARGB header on your motherboard or controller. Do NOT connect to a 12V RGB header.
- Software: Verify that your motherboard's RGB control software is installed and configured correctly.
- Power: Some ARGB controllers require separate SATA power. Ensure this is connected if applicable.
9. User Tips
- Case Compatibility: Before purchasing, always check your PC case's CPU cooler clearance to ensure the JONSBO CA series cooler will fit.
- Thermal Paste Application: While a pea-sized dot is standard, some users prefer a small 'X' pattern for larger CPUs to ensure full coverage.
- Cable Management: Route fan and ARGB cables neatly to avoid obstructing airflow and for a cleaner build aesthetic.
- BIOS Fan Curve: Experiment with custom fan curves in your motherboard's BIOS to find a balance between cooling performance and noise levels that suits your preference.
10. Warranty and Support
JONSBO products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official JONSBO website or contact your retailer. Keep your proof of purchase for warranty claims.
This product is certified with CE and RoHS, indicating compliance with European safety, health, and environmental protection standards.