1. Introduction
Thank you for choosing the MOMAN H2 Pro Helmet Intercom. This device is designed to enhance your riding experience by providing seamless communication, music playback, and hands-free calling capabilities. Featuring Bluetooth 5.0, IP65 waterproofing, and advanced noise reduction, the H2 Pro ensures clear audio and reliable performance in various conditions. Please read this manual carefully to ensure proper installation and operation.
2. Package Contents
Verify that all items are present in your package:
- H2P Intercom Unit (x2 for dual pack)
- Velcro Clip (x2)
- Back Clip (x2)
- Hook and Loop Fasteners (x2)
- Replaceable Hard Mic and Soft Mic Speakers (x2 sets)
- User Manual (x1)
- USB Cable (x2)
- Screw Driver (x2)
- Headphone Velcro (x8)
3. Key Features
- Two-Rider Communication: Real-time intercom for up to 1000 meters.
- Bluetooth 5.0: Stable and efficient wireless connection for calls, music, and GPS.
- Dual Noise Reduction: DSP and CVC technologies minimize traffic, wind, and engine noise for clear audio.
- Hi-Fi Stereo Sound: Equipped with 40mm speakers for outstanding sound quality.
- IP65 Waterproof & Dustproof: Designed to withstand severe weather conditions including snow, rain, and dust.
- Flexible Knob Control: Intuitive single-knob design for easy music control (next/previous), volume adjustment (increase/decrease), and FM radio channel selection.
- AI Voice Assistant: Supports voice commands for hands-free operation.
- Long Battery Life: 900mAh battery provides up to 20 hours of working time and 300 hours of standby time.
- Wide Helmet Compatibility: Suitable for full-face, modular, open-face, retro, and motocross helmets.
4. Setup and Installation
The MOMAN H2 Pro can be easily attached to most helmet types using the provided clips.
4.1 Attaching the Intercom Unit
- Choose between the Velcro Clip or the Back Clip based on your helmet design and preference.
- Securely attach the chosen clip to the side of your helmet. Ensure it is firmly in place to prevent movement during riding.
- Slide the H2 Pro intercom unit onto the attached clip until it clicks into place.
4.2 Installing Speakers and Microphone
- Place the 40mm speakers inside the helmet's ear pockets. Use the provided Headphone Velcro pads to secure them.
- Select either the hard mic (for open-face helmets) or soft mic (for full-face helmets) based on your helmet type.
- Attach the microphone to the inside of the helmet, positioning it close to your mouth for optimal voice pickup. Use the Hook and Loop Fasteners if needed.
- Connect the speaker and microphone cable to the appropriate port on the H2 Pro intercom unit.
5. Operating Instructions
5.1 Power On/Off
- Power On: Press and hold the power button until the indicator light turns on.
- Power Off: Press and hold the power button until the indicator light turns off.
5.2 Bluetooth Pairing with Mobile Device
- Ensure the H2 Pro is powered off.
- Press and hold the power button for approximately 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your mobile device, enable Bluetooth and search for "MOMAN H2 Pro".
- Select the device to pair. Once connected, the indicator light will turn blue.
5.3 Intercom Communication
For two-rider communication, both H2 Pro units must be paired with each other.
- Ensure both H2 Pro units are powered on and not connected to any mobile devices.
- On one unit, press and hold the intercom button until the indicator light flashes green rapidly.
- On the second unit, press the intercom button once.
- The units will automatically connect. Once connected, the indicator lights will turn solid green.
- To initiate intercom, press the intercom button once on either unit. To end, press it again.
5.4 Music and Volume Control
The flexible knob control allows for easy adjustment:
- Next Music: Rotate the knob clockwise (1).
- Previous Music: Rotate the knob counter-clockwise (2).
- Increase Volume: Press and hold the knob while rotating clockwise (2).
- Decrease Volume: Press and hold the knob while rotating counter-clockwise (1).
- Voice Alarm: The device will provide a voice alarm if the volume is too high or too low.
5.5 FM Radio
To activate and control the FM radio:
- Turn On/Off FM Radio: Press the FM button (if available) or a designated multi-function button.
- Change Channels: Rotate the knob to scan for the next or previous FM station.
5.6 Voice Assistant
To activate your mobile device's voice assistant (e.g., Siri, Google Assistant):
- Activate: Briefly press the designated voice assistant button or a specific combination of buttons (refer to quick start guide for exact button).
6. Maintenance
6.1 Cleaning
- Wipe the intercom unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the charging port cover is securely closed to maintain IP65 waterproof rating.
6.2 Storage
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery to approximately 50% to prolong its lifespan.
6.3 Battery Care
- Charge the device using the provided USB cable and a standard 5V charger.
- Avoid fully discharging the battery frequently.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery | Charge the device for at least 2 hours. |
| No sound from speakers | Volume too low, speakers not connected, or faulty speakers | Increase volume, check speaker connection, or test with another audio source. |
| Cannot pair with mobile device/intercom | Device not in pairing mode, too far apart, or interference | Ensure device is in pairing mode (flashing red/blue), bring devices closer, or restart both devices. |
| Intercom connection drops frequently | Out of range, obstacles, or interference | Stay within 1000m range, avoid large obstacles, or try re-pairing. |
8. Specifications
| Feature | Detail |
|---|---|
| Style | Headset Microphone |
| Use | Communication |
| Function | Portable |
| Brand Name | MOMAN |
| Model Number | H2 pro |
| Frequency Response Rate | 2.4GHz |
| Transmission Range (Intercom) | Up to 1000m |
| Connection Distance with Mobile | 20m |
| Bluetooth Protocol | A2DP, AVRCP |
| Charging Port | Type-C |
| Standby Time | 300H |
| Working Time | 20H |
| Battery Capacity | 900mA |
| Charging Time | 2H |
| Charging Voltage | 5V |
| Speaker Diameter | 40mm |
| Waterproof Rating | IP65 |
| Operating Temperature | -20°C to 50°C |
9. User Tips
- Replacement Parts: If you require replacement headphones or microphones, please contact MOMAN customer support or an authorized dealer to ensure compatibility and maintain optimal performance.
- Optimal Mic Placement: For the best noise cancellation and voice clarity, ensure the microphone is positioned directly in front of your mouth, ideally within 1-2 cm.
- Intercom Range: While the device supports up to 1000m, actual range may vary depending on terrain, obstacles, and weather conditions. For best results, maintain a clear line of sight between units.
10. Warranty and Support
MOMAN products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official MOMAN website. Keep your proof of purchase for warranty claims.