1. Introduction
The E-ACE K46/K46P Universal TPMS (Tire Pressure Monitoring System) is designed to enhance driving safety by providing real-time monitoring of your vehicle's tire pressure and temperature. This solar-powered wireless system features a clear LCD digital display and offers options for both external and built-in sensors to suit various vehicle types and user preferences. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your TPMS.

Image: E-ACE TPMS display unit with solar panel and four tire sensors (external and built-in types shown).
2. Safety Information
- Always ensure the TPMS display unit is securely mounted and does not obstruct your view or interfere with driving controls.
- Do not attempt to disassemble or modify the TPMS display unit or sensors, as this may void the warranty and pose safety risks.
- For built-in sensor installation, it is highly recommended to seek professional assistance from a car service center to ensure proper and safe installation.
- Regularly check tire pressure manually with a calibrated gauge, as the TPMS is an auxiliary monitoring system.
- Keep the display unit and sensors away from extreme heat or cold beyond their specified operating temperatures.
3. Product Overview
3.1 Display Unit Features
- Colorful LCD Digital Display: Provides clear, real-time information for all four tires.
- Real-time Monitoring: Continuously displays tire pressure and temperature.
- Intelligent Shock Boot: Automatically activates when the car is moving, eliminating the need for manual power on/off.
- Dual Charging Mode: Supports solar power charging and USB charging for continuous operation.

Image: Close-up view of the TPMS display showing tire pressure values (e.g., 2.5 Bar), tire temperatures (e.g., 30°C), and the device's power level.
3.2 Sensor Types
The E-ACE TPMS is available with two sensor options: External Sensors (K46) and Built-in Sensors (K46P).
External Sensors (K46)
- Easy to install and replace.
- Dust-Proof, Water-Proof, and Anti-theft design.
- Designed to withstand high and cold temperatures.

Image: Four external tire pressure sensors labeled LF, RF, RR, LR.
Built-in Sensors (K46P)
- More stable and accurate readings.
- Requires professional installation.
- Dust-Proof, Water-Proof, and Anti-theft design.
- Designed to withstand high and cold temperatures.

Image: Four built-in tire pressure sensors.

Image: Comparison of external sensor dimensions (approx. 17-20mm) and built-in sensor dimensions (approx. 55-80mm).
4. Specifications
| Feature | Description |
|---|---|
| Model Name | K46/K46P |
| Brand Name | E-ACE |
| Item Type | Alarm Systems & Security |
| Voltage | 5V |
| Batteries Included | Yes |
| Display Unit Dimensions | Approx. 7.9cm (width) x 5.5cm (height) |
| Charging | Solar Power + USB Charging |
| Origin | Mainland China |
4.1 External Sensor (K46)
- Protection: IP67 (Dust-Proof / Water-Proof / Anti-theft)
- Working Temperature: -20℃ to 80℃
- Battery Life: 3 Years (replaceable)
4.2 Built-in Sensor (K46P)
- Protection: IP67 (Dust-Proof / Water-Proof / Anti-theft)
- Working Temperature: -40℃ to 125℃
- Battery Life: 5 Years (not replaceable)

Image: Diagram illustrating the dimensions of the TPMS display unit, showing a width of 7.9cm and a height of 5.5cm.
5. Setup and Installation
5.1 Initial Activation and Charging
Upon receiving your TPMS, it is crucial to charge the display unit for approximately 3-4 hours to activate its internal battery. The device may have automatically started during transportation, draining its power. Therefore, it might not turn on immediately out of the box, which is normal. Use the provided USB cable for charging.

Image: Close-up of the micro USB charging port on the TPMS display unit and a USB charging cable, indicating approximately 3 hours for a full charge.
5.2 Display Unit Placement
The TPMS display unit offers non-destructive installation without wiring. It can be placed in two main ways:
- Concealed Sticker Glass: Mounted on the windshield with an adhesive.
- Simple Center Console Placement: Placed directly on the dashboard.

Image: The TPMS display unit positioned on a car's dashboard, demonstrating its non-destructive installation.

Image: Two examples of display unit placement: one mounted on the windshield (concealed sticker glass) and another on the center console.
5.3 External Sensor Installation (K46)
External sensors are designed for quick and easy self-installation, typically within 2 minutes per sensor, without the need for tire disassembly, wiring, or dynamic balancing.
- Rotate the air nozzle dust cover counter-clockwise to remove it.
- Screw on the hexagonal nut onto the valve stem.
- Insert the anti-disassembly gasket onto the valve stem.
- Screw the sensor onto the corresponding tire's valve stem and tighten it according to the position marked on the sensor housing (LF, RF, RR, LR).
- Tighten the hexagonal nut in reverse with the provided wrench (approximately 0.5Nm force) to secure the sensor.
- Check for air leaks around the sensor using soapy water.

Image: Six-step diagram illustrating the installation process for external tire pressure sensors, including removing the dust cover, screwing on the hexagonal nut, inserting the gasket, screwing on the sensor, tightening the nut with a wrench, and checking for leaks.
5.4 Built-in Sensor Installation (K46P)
Built-in sensors require professional installation as they are mounted inside the tire. It is strongly recommended to have this procedure performed by a qualified car service center.
- Remove the original tire valve.
- Install the built-in sensor onto the valve stem from inside the tire.
- Mount the tire back onto the wheel.
- Inflate the tire to the recommended pressure.
- Perform wheel balancing if necessary.

Image: Diagram showing the multi-step process for installing built-in tire pressure sensors, which involves dismounting the tire, installing the sensor, and remounting the tire.
6. Operating Instructions
6.1 Automatic Operation
The E-ACE TPMS features an intelligent shock boot function. The display unit will automatically wake up and begin monitoring when your vehicle starts moving. There is no need to manually turn the device on or off during normal use.
6.2 Understanding the Display
The LCD display shows real-time data for each of your four tires. Key indicators include:
- Tire Pressure Value: Displayed in Bar (or PSI, depending on settings).
- Tire Temperature: Displayed in Celsius (or Fahrenheit, depending on settings).
- Power Level: Indicates the battery status of the display unit.

Image: Close-up view of the TPMS display showing tire pressure values (e.g., 2.5 Bar), tire temperatures (e.g., 30°C), and the device's power level.
6.3 Alarms
The system will trigger an alarm under the following conditions:
- Low air pressure
- High temperature
- Tire leakage
- Low battery (for the display unit or individual sensors)
When an alarm sounds, check the display to identify the affected tire and the nature of the alert. Address any tire issues promptly and safely.
6.4 Charging the Display Unit
The display unit can be charged via two methods:
- Solar Power: The integrated solar panel charges the unit when exposed to sunlight. Ensure the unit is placed in a position where it receives adequate light.
- USB Charging: Connect the unit to a 5V USB power source using the provided Micro USB cable. A full charge typically takes about 3 hours.
7. Maintenance
7.1 External Sensor Battery Replacement (K46)
The batteries in the external sensors are replaceable and have an estimated life of 3 years. To replace a battery:
- Remove the sensor from the tire valve stem.
- Remove the dismantling gasket from the sensor.
- Use the provided wrench to carefully open the sensor shell.
- Remove the old battery.
- Insert a new CR1632 button cell battery, ensuring correct polarity.
- Close the sensor shell securely with the wrench and re-install the dismantling gasket.
- Re-install the sensor onto the tire valve stem following the installation steps in Section 5.3.

Image: Four-step visual guide for replacing the external sensor battery: 1. Remove gasket, 2. Wrench shell, 3. Remove battery, 4. Replace new battery (CR1632 shown).
7.2 Built-in Sensor Battery (K46P)
The batteries in the built-in sensors are not replaceable and have an estimated life of 5 years. If a built-in sensor battery depletes, the entire sensor unit will need to be replaced by a professional.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display unit does not turn on initially | Battery drained during transit. | Charge the display unit for 3-4 hours using the USB cable before first use. |
| No tire pressure/temperature readings | Sensors not installed correctly or not paired. Sensor battery low/dead. | Ensure sensors are correctly installed and tightened. Check sensor battery (external sensors). Re-pair sensors if necessary (refer to product specific pairing instructions, if any, not provided in current data). Drive the vehicle for a short period to activate sensors. |
| Inaccurate readings | Sensor malfunction or incorrect calibration. | Verify readings with a manual gauge. If discrepancies persist, contact customer support. |
| Alarm sounds frequently | Tire pressure/temperature outside set limits. | Check all tire pressures and temperatures. Adjust tire pressure to vehicle manufacturer's recommendations. If conditions are normal, check alarm thresholds in settings (if adjustable). |
9. User Tips
- Check Tire Manufacturer's Recommendations: Always refer to your vehicle's manual or the sticker on the driver's side door jamb for the recommended tire pressure for your specific vehicle. The TPMS will alert you if pressures deviate from safe operating ranges, but knowing your vehicle's optimal pressure is key.
- Regular Visual Inspection: Even with a TPMS, it's good practice to visually inspect your tires regularly for any signs of damage or punctures.
- Solar Charging Efficiency: For optimal solar charging, ensure the display unit's solar panel is clean and unobstructed by dust or glare.
10. Warranty and Support
The E-ACE K46/K46P TPMS comes with a one-year warranty from the date of purchase, covering manufacturing defects. For technical support, warranty claims, or any questions not covered in this manual, please contact the seller or manufacturer directly through your purchase platform.