1. Introduction
Thank you for choosing the Aairsk XT90 Electric Mountain Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your e-bike. Please read it thoroughly before your first ride and keep it for future reference. The Aairsk XT90 is designed for adult riders seeking a powerful and versatile electric bicycle capable of handling various terrains, including off-road, mountain trails, snow, and urban environments.

Figure 1: Aairsk XT90 Electric Mountain Bike highlighting 1500W motor, 48V 20Ah battery, 28MPH max speed, and 26*2.6 inch tires.
2. Important Safety Information
⚠ WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
- Always wear a helmet and appropriate safety gear when riding.
- Familiarize yourself with local traffic laws and regulations regarding electric bicycles.
- Perform a pre-ride inspection before each use, checking brakes, tire pressure, battery level, and all connections.
- Do not operate the e-bike under the influence of alcohol or drugs.
- Avoid riding in adverse weather conditions, such as heavy rain or snow, if not equipped for it.
- Ensure the battery is securely locked in place before riding.
- Do not modify the e-bike's electrical system or components, as this may void the warranty and create safety hazards.
3. Package Contents
Your Aairsk XT90 Electric Mountain Bike package should include the following items:
- Aairsk XT90 E-bike (partially assembled)
- 48V 20Ah Lithium Battery
- Battery Charger
- User Manual
- Assembly Tools (basic wrench set, hex keys)
- Pedals
- Front Wheel
- Handlebar
- Seat Post and Saddle
Please inspect all components upon receipt. If any items are missing or damaged, contact customer support immediately.
4. Assembly Instructions
The Aairsk XT90 comes partially assembled. Follow these steps to complete the assembly:
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- Front Wheel Installation: Attach the front wheel to the fork. Ensure the quick-release skewer or axle nuts are securely tightened.
- Handlebar Installation: Mount the handlebar onto the stem. Adjust the angle for comfortable riding and tighten the stem bolts. Ensure all cables are routed correctly and not pinched.
- Seat Post and Saddle: Insert the seat post into the frame's seat tube. Adjust the saddle height to allow for a slight bend in your knee when the pedal is at its lowest point. Tighten the quick-release clamp or bolt.
- Pedal Installation: Identify the left (L) and right (R) pedals. The left pedal tightens counter-clockwise, and the right pedal tightens clockwise. Apply a small amount of grease to the threads and tighten securely with a wrench.
- Battery Installation: Insert the 48V 20Ah battery into its designated compartment on the frame. Ensure it clicks into place and is locked with the key provided.
- Final Checks: Double-check all bolts, nuts, and quick releases for tightness. Ensure the brakes are functioning correctly and the tires are inflated to the recommended pressure (refer to tire sidewall).
5. Key Components Overview
Familiarize yourself with the main parts of your Aairsk XT90 e-bike:
- Motor: 1500W Peak Powerful Motor, providing strong acceleration and climbing ability.
- Battery: 48V 20Ah Lithium Battery, offering a range of 28-37 miles in throttle mode and 40-65 miles in assisted mode. Features BMS protection and 6-hour fast charging.
- Tires: 26"x2.6" All-Terrain Fat Tires, suitable for various surfaces.
- Suspension: Full Suspension system with a lockable feature, designed to absorb up to 85% of bumps for a smoother ride.
- Gears: Shimano 21-speed derailleur system for versatile gear shifting across different terrains.
- Brakes: Double Sensitivity Disc Brakes for reliable stopping power.
- Display: Intelligent Display showing real-time speed, battery level, speed grade, riding status, and gear adjustment.
- Lighting: Integrated Front Light for improved visibility.
- Throttle: Twist Throttle for electric-only propulsion.
- Horn: Integrated Horn for safety.

Figure 2: Intelligent Display and handlebar controls, including brake levers, Shimano derailleur, headlights + horn, and twist throttle.

Figure 3: Full suspension system with lockable feature for enhanced comfort and control.

Figure 4: Close-up of double sensitivity disc brakes, integrated front light, and adjustable seat.
6. Initial Setup and Charging
6.1 Battery Charging
Before your first ride, fully charge the battery. The 48V 20Ah Lithium Battery features 6-hour fast charging.
- Ensure the e-bike is turned off.
- Locate the charging port on the battery or frame.
- Connect the charger to the charging port, then plug the charger into a standard wall outlet.
- The charger indicator light will typically show red during charging and turn green when fully charged.
- Once fully charged, disconnect the charger from the outlet first, then from the battery.

Figure 5: Illustration of the 48V 20Ah battery and charging process.
6.2 Display Settings
The intelligent display allows you to monitor and adjust various settings:
- Power On/Off: Press and hold the power button on the display to turn the e-bike on or off.
- Information Display: The display shows battery level, real-time speed, speed grade (assist level), and riding status.
- Assist Level Adjustment: Use the '+' and '-' buttons to cycle through different pedal-assist levels.
- Headlight/Horn: Controls for the headlight and horn are typically located on the left handlebar.
7. Operating Your E-bike
7.1 Riding Modes
Your Aairsk XT90 offers three riding modes:
- Electric Mode: Use the twist throttle for purely electric propulsion without pedaling. Max speed up to 28 MPH.
- Assisted Mode (Pedal-Assist): The motor provides assistance as you pedal. Adjust the assist level via the display. This mode offers a longer range (40-65 miles).
- Ordinary Cycling Mode: Ride the bike like a traditional bicycle with no motor assistance.

Figure 6: 26"x2.6" all-terrain fat tires and illustration of Electric, Assisted, and Ordinary Cycling Modes for various terrains.
7.2 Gear Shifting
The Shimano 21-speed derailleur system allows you to adapt to different inclines and speeds. Use the shifters on the handlebars to change gears smoothly. Shift to lower gears for climbing hills and higher gears for flat terrain or descents.

Figure 7: Shimano 21-speed derailleur for versatile riding.
7.3 Braking
The Aairsk XT90 is equipped with double sensitivity disc brakes. Apply both front and rear brakes gently and evenly to slow down or stop. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.
8. Maintenance
Regular maintenance ensures the longevity and safe operation of your e-bike.
- Tires: Check tire pressure before each ride. Maintain pressure within the range indicated on the tire sidewall. Inspect tires for wear, cuts, or punctures.
- Brakes: Regularly check brake pads for wear and ensure brake levers are responsive. Adjust or replace as needed.
- Chain: Keep the chain clean and lubricated for smooth shifting and to prevent rust.
- Battery Care: Store the battery in a cool, dry place. Avoid fully discharging the battery for extended periods. Charge it regularly, even if not in use, to maintain battery health.
- Cleaning: Clean your e-bike with a damp cloth. Avoid using high-pressure washers directly on electrical components.
- Fasteners: Periodically check all bolts, nuts, and quick releases for tightness.
9. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| E-bike does not power on | Battery not charged, battery not connected, power button not pressed correctly | Charge battery, ensure battery is securely installed and locked, press and hold power button on display. |
| Motor not assisting | Low battery, assist level set to zero, loose motor cable connection | Check battery level and charge if low, increase assist level on display, check motor cable connections. |
| Brakes feel weak | Worn brake pads, loose brake cable, air in hydraulic system (if applicable) | Inspect and replace brake pads, adjust brake cable tension, consult a bike mechanic for hydraulic brake issues. |
| Unusual noises | Loose components, dry chain, rubbing brakes | Check all fasteners, lubricate chain, adjust brake calipers. |
If you encounter issues not listed here or cannot resolve a problem, please contact customer support.
10. Specifications
Detailed specifications for the Aairsk XT90 Electric Mountain Bike:
| Feature | Specification |
|---|---|
| Model Number | Aairsk XT90 |
| Motor Wattage | > 500W (1500W Peak) |
| Motor Type | Brushless |
| Voltage | 48V |
| Power Supply | Lithium Battery (48V 20Ah) |
| Max Speed | 30 - 50 KM/H (approx. 28 MPH) |
| Range per Power | 31 - 60 km (40-65 miles assisted, 28-37 miles throttle) |
| Wheel Size | 26 inches (26"x2.6" Fat Tire) |
| Rated Passenger Capacity | One Seat |
| Folded | No |
| Certification | CE |
| Bicycle Weight | Approx. 60 lbs |
| Load Capacity | Approx. 330 lbs |
| Recommended Rider Height | 64.2 - 74.8 inches |

Figure 8: Product size guide with key dimensions and capacity information.
11. User Tips
- Battery Range: Actual battery range can vary based on terrain, rider weight, assist level, and weather conditions. For maximum range, utilize pedal-assist mode over pure electric throttle.
- Tire Pressure: Experiment with tire pressure within the recommended range to find the optimal balance between comfort and rolling efficiency for your preferred terrain. Lower pressure offers more grip and comfort on soft surfaces, while higher pressure is better for hard-packed roads.
- Suspension Adjustment: Utilize the lockable feature of the full suspension when riding on smooth roads to improve pedaling efficiency, and unlock it for rougher trails to absorb shocks.
- Gear Shifting: Always ease off the pedals slightly when shifting gears to ensure a smooth transition and prevent damage to the drivetrain.
12. Warranty and Support
For warranty information, technical support, or replacement parts, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.