Introduction
The ISDT F160 is a compact and efficient AC/DC Quad Smart Charger designed for a wide range of battery types used in RC hobbies and other applications. Featuring advanced GaN technology, it provides fast, reliable, and energy-efficient charging across its four independent channels. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your F160 charger.
Specifications
Below are the detailed technical specifications for the ISDT F160 charger:
| Feature | Detail |
|---|---|
| Model No. | F160 |
| Input Voltage Range | 200-240V~ 50Hz 2.5A (EU); 110-130V~ 60Hz 4A (US) |
| Output Voltage | Channel 1: 5-18.5V; Channels 2-4: 2.5-18.5V |
| Charging Current | 0.1-5.0A x4 |
| Discharging Current | 0.1-1.0A x4 |
| Maximum Charging Power | 40W x4 |
| Maximum Discharging Power | 5W x4 |
| Supported Battery Types and Cell Counts | LiFe, Lilon, LiPo, LiHv, ULiHv 1-4S | Pb 2-7S | NiCd/MH 4-12S |
| Balancing Current | 0.5A / Cell (Max) |
| USB Output Power | 5V/2A (only when Channel 1 is idle) |
| Operating Temperature | 0°C-40°C |
| Storage Temperature | -20°C-60°C |
| Dimensions | 130x128x41mm |
| Weight | 380g |
Setup
- Unpack the Charger: Carefully remove the ISDT F160 charger and all accessories from its packaging. Inspect for any damage.
- Power Connection:
- AC Power: Connect the provided AC power cable to the AC input port on the charger and then to a suitable wall outlet (200-240V~ 50Hz 2.5A for EU or 110-130V~ 60Hz 4A for US).
- DC Power: If using DC power, connect a compatible DC power source (not included) to the DC input port. Ensure the voltage and current ratings match the charger's requirements.
- Initial Power On: Once connected to power, the charger's display should illuminate.
- Battery Connection: Connect your batteries to the appropriate charging channels (CH1, CH2, CH3, CH4) using the correct balance and main discharge leads. Ensure polarity is correct.
Operating Instructions
Basic Charging Process
- Select Channel: Use the channel selection buttons (CH1, CH2, CH3, CH4) to choose the desired charging channel.
- Battery Type Selection: Navigate through the menu using the control dial to select the correct battery type (LiFe, Li-Ion, LiPo, LiHv, ULiHv, NiCd/MH, Pb) and cell count for the connected battery. Incorrect selection can damage the battery.
- Set Charging Current: Adjust the charging current (0.1-5.0A) according to your battery's specifications. It is generally recommended not to exceed 1C (one times the battery's capacity in Ah).
- Start Charging: Confirm the settings and start the charging process. The display will show real-time charging status, including current, voltage, and capacity charged.
- Monitor Progress: Keep an eye on the charging progress. The charger will automatically stop when the battery is fully charged.
Discharging
The F160 supports discharging at 0.1-1.0A per channel. Select the discharge function from the menu, set the desired discharge current and voltage cut-off, and start the process. This is useful for storage charging or cycling batteries.
USB Output
Channel 1 features a 5V/2A USB output. This port can be used to charge mobile devices or power accessories, but only when Channel 1 is idle (not actively charging or discharging a battery).
App Integration (ISDLink)
The ISDT F160 supports smart app integration and battery management via the ISDLink app. This allows for OTA cloud updates and optimized device performance. Scan the QR code or visit the official ISDT website to download the app.
Maintenance
- Cleaning: Regularly wipe the charger's exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners. Ensure no dust or debris accumulates in the ventilation slots.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect it from power when not in use for extended periods.
- Cable Inspection: Periodically check all power and battery cables for signs of wear, fraying, or damage. Replace any damaged cables immediately.
- Firmware Updates: Utilize the ISDLink app to check for and install any available firmware updates to ensure optimal performance and access to new features.
Troubleshooting
- Charger Not Powering On:
- Check if the AC or DC power cable is securely connected to both the charger and the power source.
- Ensure the power outlet or DC power source is functional.
- Battery Not Charging:
- Verify that the battery is correctly connected to the charger, including both the main discharge lead and the balance lead (if applicable).
- Ensure the correct battery type and cell count are selected in the charger's settings.
- Check if the battery itself is damaged or over-discharged.
- Error Messages:
- Refer to the charger's display for specific error codes or messages. Consult the ISDLink app or ISDT's official support for detailed explanations and solutions.
- Common errors include incorrect battery connection, over-voltage, or internal faults.
- Overheating:
- Ensure the charger is placed in a well-ventilated area and its cooling vents are not obstructed.
- Reduce the charging current if the charger consistently overheats.
User Tips
- Always double-check battery type and cell count settings before starting a charge cycle to prevent damage to batteries or the charger.
- For optimal battery life, consider using the balance charging feature for multi-cell LiPo/LiFe/Li-Ion batteries.
- Keep the charger's firmware updated via the ISDLink app for the best performance and latest features.
- Utilize the 5V/2A USB output on Channel 1 for convenient charging of small electronic devices when the channel is not in use for battery charging.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or the manufacturer directly. Keep your proof of purchase for any warranty claims.