Introduction
This manual provides comprehensive instructions for the LSW06-90B1CFSB 36V 14A Brushless Motor Controller, designed for electric scooters, mountain bikes (MTB), and e-bikes. Manufactured by Lishui Controller, a company with a long history in motor control technology since 1979, this controller is built to high standards, focusing on reliability and performance.
Lishui Controller has been a pioneer in brushless motor controller development since 1997, ensuring compatibility with international standards such as EN 15194:2017, EN ISO 13849-1:2015, UL 2849, and UL 2272. The LSW06-90B1CFSB model incorporates advanced technologies like Hall-Sensorless motor control and is designed for efficient and responsive operation.
Specifications
The LSW06-90B1CFSB controller offers robust performance for various electric vehicle applications. Key specifications are detailed below:
| Attribute | Specification |
|---|---|
| Model | LSW06-90B1CFSB |
| Type | Controller |
| Rated Voltage (Vrated) | 36V |
| Rated Current (I rated) | 7A |
| Maximum Current (I max) | 14A |
| Cut-off Voltage (Vcutoff) | 31.5V |
| Dimensions (L x W x H) | 93mm x 49mm x 29mm |
| Product Weight | 216g |
| Origin | Mainland China |
Setup and Installation
Proper installation is crucial for the optimal performance and safety of your electric vehicle. Please follow these guidelines carefully.
1. Pre-Installation Verification
Before attempting installation, it is highly recommended to verify compatibility. The LSW06-90B1CFSB controller uses the 5S communication protocol. If your existing system uses a different protocol, it may lead to error codes or malfunction.
To ensure correct replacement, compare the model number of your original controller with LSW06-90B1CFSB. If you are unsure, please consult customer service with photos of your original controller's label and connectors. This step helps prevent compatibility issues and ensures a smooth installation process.
2. Wiring Connections
The controller connects to various components of your electric vehicle. Refer to the wiring diagram below for proper connection points. The main components typically include:
- Power Supply
- Motor Hall Sensor Wires
- Brakes
- Throttle Grip
- Pedal Assist Sensor (PAS)
- Bike Headlight
- Motor
Connector Identification (Refer to Figure 4):
- Power Input: Connects to the battery. (Red/Black wires)
- Motor Phase Wires: Connects to the motor. (Typically three thicker wires)
- Motor Hall Sensor: Connects to the motor's Hall sensors. (Usually a multi-pin connector)
- Throttle: Connects to the throttle grip.
- Brake Levers: Connects to the brake cut-off sensors.
- Display/Communication: Connects to the display unit for information and control.
- Pedal Assist Sensor (PAS): Connects to the pedal assist sensor.
- Headlight/Taillight: Optional connection for lighting.
If your existing connectors do not match, modifications may be necessary. Lishui Controller offers customization software for EPAC controllers, allowing adjustment of parameters to match different pedal, display, torque sensor, and motor configurations. Contact support for assistance with connector modifications or software adjustments.
Operating Instructions
The LSW06-90B1CFSB controller acts as the "brain" of your e-bike, managing power and signals to ensure smooth operation. It processes inputs from various components and delivers appropriate output to the motor.
1. Powering On/Off
Typically, the system is powered on or off via the main switch on your e-bike's battery or display unit. Once powered on, the controller will initialize and be ready for use.
2. Basic Operation
- Throttle Control: Use the throttle grip to manually control motor speed and power output.
- Pedal Assist System (PAS): Engage the PAS by pedaling. The controller will provide motor assistance based on your pedaling input and the selected assist level.
- Brake Levers: Activating the brake levers will cut off power to the motor, ensuring safe stopping.
- Display Unit: Your e-bike's display unit (if connected) will show real-time information such as speed, range, battery capacity, and current PAS level. Use the display controls to adjust settings like assist level or turn on/off lights.
3. Advanced Features (with IoT Module & APP)
For enhanced functionality, the controller can be integrated with an IoT module and a dedicated smartphone application. This allows for:
- Real-time Monitoring: View speed, range, and battery status directly on your smartphone.
- Remote Control: Adjust light settings and PAS levels via the app.
- GPS Tracking: Track your e-bike's location.
- Riding Activity Records: Log and share your rides.
Consult the IoT module and app documentation for detailed instructions on these advanced features.
Maintenance
To ensure the longevity and reliable performance of your LSW06-90B1CFSB controller, follow these maintenance recommendations:
- Keep Dry: Protect the controller from water and excessive moisture. While the controller may have some water resistance (e.g., IPX5 rating), prolonged exposure to water can cause damage.
- Clean Connections: Periodically inspect all electrical connections for corrosion or loose fittings. Ensure they are clean and securely fastened.
- Avoid Physical Damage: Protect the controller from impacts and vibrations. Mount it securely in a protected location on your vehicle.
- Temperature Management: Avoid operating the controller in extreme temperatures outside its specified operating range (-10°C to 45°C). Ensure adequate ventilation if enclosed.
- Software Updates: If using an IoT module and app, regularly check for and install any available software or firmware updates to ensure optimal performance and compatibility.
The Hall-Sensorless motor technology used with this controller contributes to lower maintenance costs by reducing the likelihood of Hall sensor malfunctions, which are a common issue in traditional systems.
Troubleshooting
If you encounter issues with your LSW06-90B1CFSB controller, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller not responding / No power to motor | Loose power connections, faulty battery, or main power switch off. | Check battery charge. Ensure all power cables are securely connected. Verify main power switch is ON. |
| Error codes on display / Incompatible operation | Controller protocol mismatch (e.g., not 5S protocol). | Confirm your system uses the 5S protocol. If not, contact customer service for compatibility assessment or potential connector modification assistance. |
| Motor not engaging with throttle/PAS | Faulty throttle/PAS sensor, loose connections, or brake cut-off engaged. | Check throttle and PAS sensor connections. Ensure brake levers are not engaged. Test components if possible. |
| Intermittent power loss | Loose wiring, overheating, or internal fault. | Inspect all wiring for secure connections. Allow controller to cool down if it feels hot. If problem persists, contact support. |
If you are unable to resolve an issue, or if you suspect a deeper problem, please contact Lishui Controller customer support. Providing photos of your controller's label and any error messages can help expedite the diagnostic process.
User Tips
- Pre-Purchase Verification: Always send photos of your original controller's label and connectors to customer service before purchasing a replacement. This ensures you receive a compatible model and avoids potential issues.
- Protocol Awareness: Be aware that different controller models use different communication protocols. The LSW06-90B1CFSB uses the 5S protocol. Compatibility is key for proper function.
- Connector Modification: If your existing connectors don't match, it might be possible to modify them. Lishui Controller can provide assistance with this process, allowing broader compatibility.
- Leverage Hall-Sensorless Technology: This controller's Hall-Sensorless design reduces maintenance needs related to Hall sensor malfunctions, offering a more reliable experience.
- Utilize Customization Software: If you have specific component configurations (pedal, display, torque sensor, motors), inquire about Lishui's customization software to fine-tune your controller's parameters for optimal performance.
Support and Contact Information
For further assistance, technical support, or inquiries, please refer to the official user manual PDF or contact Lishui Controller directly.
Official User Manual (PDF): A detailed user manual in PDF format is available for download. This document contains additional information regarding installation, operation, and advanced features. You can access it via the following link: LSW06-90B1CFSB User Manual (PDF)
Lishui Controller Contact Information:
Lishui Controller is committed to providing active pre-sales service and quick response after-sales support.
- Nanjing Lishui Electronics Research Institute Co., Ltd (Headquarters)
Add: No.9 Shuibao Road, Yongyang Town, Lishui District, Nanjing, 211200, P.R.China
Tel: +86-25-5720-2368 / +86-25-5720-7820
Fax: +86-25-5721-2368
Email: sales@lsdzs.com - EU R&D Center
Lishui Electronics Europe GmbH
Add: Am Bahnhof 21, 53757 Sankt Augustin, Germany
Mobile: +49 15221467527
Tel: +49-2241-9454576
Fax: +49-2241-9454577
Email: info@lsee.eu - Taiwan Office
Add: No.450, Fuxing Rd., Taoyuan Dist., Taoyuan City 330, Taiwan
Tel: +886 3-333 2298
Fax: +886 3-333 3843