WDXSKY XF40V

Contents

XF40V Retro Handheld Game Console User Manual

Model: XF40V | Brand: WDXSKY

Introduction

Thank you for purchasing the WDXSKY XF40V Retro Handheld Game Console. This device offers a portable and immersive gaming experience with its 4.0-inch IPS screen, Linux operating system, and support for a wide range of retro games. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your new console.

XF40V Mobile Amusement console in various colors
The XF40V Retro Handheld Game Console, available in multiple colors.

Setup

Package Contents

Upon unboxing your XF40V console, please verify that all items listed below are included:

Product package contents including console, case, cable, screen guard, and joysticks
Contents of the XF40V package.
  • XF40V Game Console
  • Organizer/Case
  • Type-C Data Cable
  • Screen Guard
  • Replaceable Joystick Caps (2)
  • Instruction Manual (PDF) - For a detailed multi-language manual, please scan the QR codes provided at the end of this document.

Initial Charging

Before first use, it is recommended to fully charge your console. Connect the provided Type-C data cable to the console's charging interface and a compatible 5V1.5-2A charger. The red light on the console indicates charging. Once fully charged, the red light will automatically turn off. Do not press the reset button during charging.

Power On/Off

  • Power On: Press and hold the power button for 5 seconds. The system will take approximately 25 seconds to boot up.
  • Power Off: Press and hold the power button for 7 seconds to display the power-off menu. Select the appropriate option to turn off the device.

Note: Always exit any running game before shutting down. Avoid pressing any buttons while the system is starting up.

Operating Instructions

Console Layout and Controls

Familiarize yourself with the buttons and ports on your XF40V console:

Detailed button marking and port layout of the XF40V console
XF40V Button Marking and Interface Layout.
  • Front Controls: Cross Arrow Keys, Left Joystick, LED Light Strip, Right Joystick, LED Light Strip, Start Key, Select Key, FN Key, Y/X/A/B Buttons, Horn.
  • Top/Bottom/Side Ports: R1/R2/L1/L2 Keys, Vibration Motor, Power Indicator, Reset Button, TF Card Slot, Volume Keys, Headphone Jack (Standard 3.5mm), Type-C OTG Data Port, Type-C Charging Interface, Lanyard Hole.

The console features replaceable joystick caps, allowing you to customize your tactile experience.

Image showing the replaceable arcade joysticks on the XF40V console
Replaceable arcade joysticks for different tactile sensations.

Function Shortcut Combinations (General)

These shortcuts apply during gameplay (except for PSP and NDS games):

  • Fix System Bugs: L1 + L2 + R1 + R2 + (SELECT + 3)
  • Save Game Progress: SELECT + R1
  • Load Saved Game Progress: SELECT + L1
  • Exit the Game: (SELECT + START) * 2
  • Display FPS: SELECT + B
  • RA Menu: SELECT + X
  • Game Screenshot: SELECT + Y
  • Game Acceleration Start/Stop: SELECT + R2
  • Pause the Game: SELECT + A

PSP Game Button Instructions

  • PSP Menu: SELECT + B
  • PSP Save Game: Press SELECT + B to enter the PSP menu, then navigate to 1.settings > 2.system > 3.loadsavestate > 4.slot. After successful saving, select 7.Exit to return to the game.

NDS Game Button Instructions

  • Switch Vertical/Horizontal Screen: Press R2
  • Display Full-Screen Switch: Press L2
  • Stylus Click: Press the Right Joystick
  • Game Background Menu: Press the Left Joystick

Child Mode Unlock

To unlock Child Mode, press the START key, select "UNLOCK USER INTERFACE MODE", press A, and then press the sequence A-A-A-B-A.

Joystick Light Settings

Press START to open the menu, then press A at "LEDS SETTINGS" to enter the selection. Note that the brightness of the joystick lights cannot be adjusted in "SCROLLING" mode, but it can be adjusted in all other modes.

WiFi Multiplayer Setup

The XF40V supports Wi-Fi multiplayer for games that offer a two-player or multi-player battle mode.

Two XF40V consoles engaged in WiFi multiplayer combat
Enjoy multiplayer combat via Wi-Fi connection.

Setup Steps for the First Game Console (Host)

  1. On the main interface, press the "START" button to enter the settings. Find "Network Settings" and connect to an available Wi-Fi network. (For multiplayer games, all devices must be connected to the same Wi-Fi network).
  2. Record the IP Address displayed (this will be needed for the second console).
  3. Open a game that supports multiplayer (2 or more players). Enter the game interface, then press "SELECT" + "X" to access the settings menu, and press the "B" button.
  4. Find the "Host" option to start the network game.

Setup Steps for the Second Game Console (Client)

  1. Press the "START" key in the main interface to enter the settings. Find "Network Settings" and connect to the same Wi-Fi network as the first console.
  2. Once the Wi-Fi connection is successful, open the same game and access the settings menu by pressing "SELECT" + "X", then press "B".
  3. Find the "Connect to Netplay Host" option.
  4. Enter the IP address of the first console (host) and press the "X" button to join the game.
  5. If both consoles display a successful connection, select the double battle option to enter the game.

Note: The console designated as the "host" will act as the main control for the network game.

Emulator Core Switching

If a game fails to run, it might be due to the emulator not supporting that specific game. You can try changing the emulator core:

  1. Select the game name with an error in the game list.
  2. Hold down the "A" key for a few seconds to open "Advanced Game Options".
  3. Try changing the "Emulator" to a different core.

If the game still cannot run after changing the emulator, there might be an issue with the game ROM. Please report such issues for correction.

Core Selection Suggestions:

  • CPS1, 2, 3: Prioritize FBAlpha2012, followed by FBNeo and other cores.
  • FBNeex: Prioritize FBNeo, followed by FBAlpha2012 and other cores.
  • MAME: Prioritize FBNeo, followed by MAME2010 and other cores.
  • GBA: MGBA supports shortcut combinations, and GPSP supports game modification.

Game Settings (Global, Emulator, Single Game)

The XF40V offers three levels of game settings:

  1. Global Settings: Configured in the "Game Settings" section of the ES menu.
  2. Emulator Settings: Accessed via "Game Settings" > "PERSYSTEMADVANCED CONFIGURATION", corresponding to different emulator modes.
  3. Single Game Settings: Hold down the "A" button on a specific game name and set options in the "Advanced Game Options" that appears.

Priority Order: Individual game settings > Emulator settings > Global settings.

Changing the Theme

Press START to open the selection menu, select "User Interface Settings", press A to enter, then choose "Background Theme" and switch to your preferred theme.

Adjusting Game Display Aspect Ratio

  1. Press START to open the selection menu, select "Game Settings", press A to enter the settings, scroll down to select "Game Screen Aspect Ratio", and choose an appropriate aspect ratio.
  2. X/Y: Select according to the game's original resolution. For example, 720x720 corresponds to a 1:1 aspect ratio; 640x480 and 1024x768 correspond to a 4:3 aspect ratio; 480x272, 1080x720, and 800x480 correspond to a 16:9 aspect ratio. Games will basically display in full screen (some games may not be displayed in full screen without distortion).
  3. CORE PROVIDEO: This setting uses the default resolution of the emulator, which corresponds to the default resolution of the game model. This ensures the game screen is fully displayed according to its original ratio without distortion. For example, if a vertical shooting game is displayed horizontally, it will be stretched, resulting in serious screen distortion. Using COREPROVIDEO can ensure the original ratio remains unchanged. For GB and GBC games, using X/Y full screen may cause serious distortion; COREPROVIDEO is recommended.

Adding a Game to Favorites

Select the game you wish to add to your favorites list. Hold down the "A" key to open a menu, select "Add to Favorites", press the "A" key to confirm, and the selected game will be added.

Adjusting Screen Brightness

Press the START key to open the selection menu, select "System Settings", press the "A" key to enter the System Settings menu, select "Brightness". The left key of the directional pad decreases brightness, and the right key increases it.

Converting Language

Press the START key to open the selection menu, select "System Settings", then "Language". Press A to enter the language selection, choose your desired language, and press A to confirm. Changing the language requires a restart. After selection, return to the previous menu, enter the exit option, and select to restart.

Setting B Side in FDS Games

Some FDS games require setting the B side to start. If you open the game and are prompted to set the B side, press L1 to set the B side, and the game will load normally.

Adding Games to the Console

To add new games:

  1. Insert the TF card into your computer.
  2. Locate the disk named "EEROMS".
  3. Place the downloaded game ROMs into the corresponding emulator folder.
  4. Place game images (screenshots/covers) into the "media/screenshot" folder.
  5. Open the "gamelist.xml" file with a text editor (like Notepad).
  6. Add the newly added game to the list by imitating the existing game information structure.
  7. Safely eject the TF card from your computer.
  8. Insert the TF card back into the console and start it. The newly added game should now appear.

Note: If the "EEROMS" disk is not displayed on your computer, go to "This PC" on your desktop, right-click, select "Manage", then "Disk Management". Scroll down to find the TF card disk, right-click, and assign a drive letter to it.

Maintenance

Charging Guidelines

  • Always use a 5V1.5-2A charger for optimal charging.
  • Avoid pressing the reset button while the console is charging.
  • A full charge typically takes 2 hours.

General Care

  • Keep the console clean and free from dust. Use a soft, dry cloth for cleaning.
  • Apply the provided screen guard to protect the IPS screen from scratches.
  • Store the console in its organizer/case when not in use to prevent damage.

Troubleshooting

  • Game Not Running: Try switching the emulator core as described in the "Emulator Core Switching" section. If the issue persists, the game ROM might be incompatible or corrupted.
  • System Startup Issues: Ensure no buttons are pressed during the system's boot sequence.
  • Charging Indicator (Red Light) Stays On/Off Incorrectly: Verify the charger meets the 5V1.5-2A specification. If the issue persists, try a different compatible Type-C cable and charger.
  • Wi-Fi Multiplayer Connection Failure: Ensure both consoles are connected to the exact same 2.4G Wi-Fi network. Double-check the IP address entered for the client console.
  • Screen Distortion in GB/GBC Games: Switch the aspect ratio setting to "CORE PROVIDEO" instead of X/Y full screen.

Specifications

Table of XF40V technical specifications
Detailed technical specifications of the XF40V console.
FeatureDescription
SystemOpen Source Linux System
Emulators SupportedMAME, N64, PS1, NEOG10, GBA, IFC, IMDI, CPS1, CPS2, CPS3, PSP, and 30+ others
Screen4.0 inch IPS OCA full fit MIPI screen
Screen Resolution720*720
CPURK3326 ARM 64bit quad-core Cortex-A35 CPU up to 1.5GHz
GPUMALI-G31MP2 (520MHz), Support for OpenGL ES 3.2
EMMC Storage1GB + 8GB/4GB (Internal)
TF Card Support64GB-256GB
HornBuilt-in 8Ω 1W Cavity Horn
Vibration MotorRated speed: 13000±3000 RPM, Vibration Level: 1G
WiFi2.4G WiFi 802.11B/G/N
BatteryLi-Po 3.7V 4000mAh
Battery Life4-6 hours of gaming time
Input Power5V1.5-2A
Charging Time2 hours
Charging InterfaceType-C (Support)
OTG Data PortType-C (Support)
Earphone InterfaceStandard 3.5mm Interface
Games Included18000 (64G version), 22000 (128G version)
RGB Lighting JoysticksYes
Bluetooth-compatibleYes
Touch ScreenNo
Recommended Age12+
CertificationsCE, FCC, RoHS

User Tips

  • Game Compatibility: Due to the limitation of the CPU function, some games may not be compatible. This is considered normal and falls outside the scope of after-sales service warranty.
  • External Display: The XF40V does not support direct HDMI output to a larger screen.
  • Game Library: The console comes pre-loaded with a vast library of games (18,000 for 64GB, 22,000 for 128GB), offering a wide variety of retro classic titles.
  • Charging Safety: Always use a charger with a current output not exceeding 5V2A to prevent damage to the device.
  • Screen Settings for Older Games: For Game Boy (GB) and Game Boy Color (GBC) games, using the X/Y full screen option might cause significant distortion. It is recommended to use the "CORE PROVIDEO" aspect ratio setting for these titles to maintain their original display proportions.

Warranty and Support

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE 2:

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Additional Resources

For further details and multi-language instructions, please refer to the comprehensive user manual PDF. You can access it by scanning the QR codes below:

QR codes for multi-language instruction manuals
Scan these QR codes to access the multi-language instruction manual.

The full PDF manual can be found at: XF40V User Manual (PDF)

Product Video Demonstration

Watch a video demonstration of the XF40V console, including unboxing, system manual overview, simulator demonstration, and multiplayer gameplay:

Video: XF40V Unboxing, System Manual, Simulator Demonstration, and Multiplayer Gameplay.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.