Akko 5087B Plus Tri-mode Mechanical Keyboard User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Akko 5087B Plus Tri-mode Mechanical Keyboard. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your user experience.

Key Features

• Tri-mode Connectivity: Supports Bluetooth, 2.4GHz wireless, and USB Type-C wired connections.
• 80% TKL Layout: Compact Tenkeyless design with 87 keys.
• Hot-Swappable Switches: Equipped with 5-pin hot-swappable sockets for easy switch replacement.
• Akko V3 Cream Yellow Pro Switches: Linear switches with 50gf ± 5gf actuation force and 3.3mm total travel.
• PBT Double-shot Keycaps: Durable keycaps with ASA profile, resistant to shine.
• RGB Backlighting: Customizable RGB lighting with multiple modes and effects via Akko Cloud Driver.
• Russian Layout: Designed for users who prefer or require the authentic Russian regional layout.
• Long-lasting Battery: Built-in 3000mAh battery for wireless use.
• Multi-System Compatibility: Compatible with Windows, macOS, iOS, and Android operating systems.

Setup Instructions

Package Contents

Before you begin, please ensure all items are present:

• Akko 5087B Plus Mechanical Keyboard
• USB Type-C Cable
• 2.4GHz Wireless Receiver
• Keycap Puller
• Switch Puller
• User Manual (this document)

Connecting Your Keyboard

The Akko 5087B Plus supports three connection modes: USB Type-C (wired), 2.4GHz wireless, and Bluetooth.

1. Wired Connection (USB Type-C)

1. Locate the USB Type-C port on the keyboard.
2. Connect one end of the provided USB Type-C cable to the keyboard.
3. Connect the other end of the cable to an available USB port on your computer.
4. The keyboard will be automatically detected and ready for use.

2. 2.4GHz Wireless Connection

1. Locate the 2.4GHz wireless receiver. It is usually stored in a compartment on the keyboard.
2. Plug the 2.4GHz receiver into an available USB port on your computer.
3. On the keyboard, switch the mode selector to 2.4G wireless mode.
4. The keyboard should automatically connect. If not, press Fn + E (for 2.4G pairing) to initiate pairing.

3. Bluetooth Connection

The keyboard supports Bluetooth 5.0 and can pair with up to three devices.

1. On the keyboard, switch the mode selector to Bluetooth mode.
2. Press and hold Fn + Q, Fn + W, or Fn + E for 3-5 seconds to enter pairing mode for Bluetooth device 1, 2, or 3 respectively. The indicator light will flash rapidly.
3. On your device (computer, tablet, or smartphone), open Bluetooth settings and search for new devices.
4. Select "Akko 5087B Plus" from the list of available devices.
5. Once connected, the indicator light on the keyboard will stop flashing and remain solid for a few seconds.
6. To switch between paired Bluetooth devices, press Fn + Q, Fn + W, or Fn + E briefly.

Operating Instructions

Basic Keyboard Functions

• Typing: Use the keys as you would on any standard keyboard.
• Function Keys (F1-F12): These keys may have secondary functions accessible by pressing the Fn key simultaneously. Refer to the keycap legends for specific functions.

RGB Backlighting Control

The keyboard features customizable RGB backlighting. Control is primarily through the Akko Cloud Driver software, but some basic controls are available directly on the keyboard:

• Change Lighting Mode: Use Fn + specific keys (refer to keyboard legends, often arrow keys or dedicated lighting keys) to cycle through different RGB effects.
• Adjust Brightness: Use Fn + Up/Down arrow keys (or similar, check legends) to increase or decrease backlight brightness.
• Adjust Speed/Direction: Use Fn + Left/Right arrow keys (or similar) to change the speed or direction of dynamic lighting effects.

Akko Cloud Driver Software

For advanced customization of key assignments, macros, and RGB lighting effects, download and install the Akko Cloud Driver software from the official Akko website. This software allows for a personalized keyboard experience.

Battery Management

The keyboard is equipped with a 3000mAh battery for wireless operation.

• Charging: Connect the keyboard via the USB Type-C cable to a computer or a USB power adapter. The indicator light will show charging status.
• Battery Level Check: Specific key combinations (e.g., Fn + B) might indicate battery level. Refer to the keyboard's specific documentation or Akko Cloud Driver for details.
• Power Saving: The keyboard will enter sleep mode after a period of inactivity to conserve battery. Press any key to wake it up.

Maintenance

Cleaning the Keyboard

• Keycaps: Use a keycap puller to carefully remove keycaps. Clean them with a mild soap solution and a soft cloth, then rinse and dry thoroughly before reattaching.
• Keyboard Body: Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Avoid excessive moisture.
• Between Keys: Use compressed air to remove dust and debris from between the keys.

Replacing Switches (Hot-Swappable Feature)

The Akko 5087B Plus features 5-pin hot-swappable sockets, allowing you to change switches without soldering.

1. Remove Keycap: Use the provided keycap puller to gently remove the keycap from the switch you wish to replace.
2. Remove Switch: Use the provided switch puller to carefully grip the top and bottom clips of the switch. Gently pull the switch straight up to remove it from the PCB.
3. Insert New Switch: Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight. Gently push the switch down until it clicks into place. Do not force it.
4. Reattach Keycap: Place the keycap back onto the new switch.

Troubleshooting

Keyboard Not Responding

• Wired Connection:
  • Ensure the USB Type-C cable is securely connected to both the keyboard and the computer.
  • Try a different USB port on your computer.
  • Try a different USB Type-C cable.
• 2.4GHz Wireless Connection:
  • Ensure the 2.4GHz receiver is properly plugged into a USB port.
  • Verify the keyboard is switched to 2.4G mode.
  • Re-pair the keyboard by pressing Fn + E.
  • Ensure there are no strong wireless interferences nearby.
• Bluetooth Connection:
  • Ensure the keyboard is switched to Bluetooth mode.
  • Verify the correct Bluetooth channel (Fn + Q/W/E) is selected.
  • Check your device's Bluetooth settings to ensure the keyboard is paired and connected.
  • Try unpairing and re-pairing the keyboard.
  • Ensure the keyboard battery is charged.

Keys Not Registering or Double-Typing

• This could indicate a faulty switch. Use the hot-swappable feature to replace the problematic switch.
• Ensure the switch is fully seated in its socket.
• Clean any debris around the switch.

RGB Backlighting Not Working

• Ensure the backlight is not turned off or set to minimum brightness (Fn + Up/Down arrow keys).
• Check settings in the Akko Cloud Driver software.
• Ensure the keyboard firmware is up to date.

Wireless Connectivity Issues (Lag, Disconnections)

• Move the keyboard closer to the receiver/device.
• Ensure there are no large metal objects or other wireless devices causing interference.
• Charge the keyboard battery.

Specifications

User Tips

• For optimal wireless performance, keep the 2.4GHz receiver or Bluetooth-enabled device within close proximity to the keyboard.
• Regularly update the keyboard firmware and Akko Cloud Driver software for the latest features and bug fixes.
• Experiment with different RGB lighting modes and effects using the Akko Cloud Driver to personalize your setup.
• When replacing switches, ensure the new switches are compatible with 5-pin hot-swappable sockets and align the pins carefully to avoid bending.

Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official Akko website or contact Akko customer service directly. Keep your proof of purchase for warranty claims.