1. Introduction
The ATK Blazing Sky X1 V2 series is a high-performance wireless gaming mouse designed for competitive gamers. Featuring advanced sensors, ultra-lightweight design, and long-lasting battery life, it provides a superior gaming experience. This manual will guide you through the setup, operation, and maintenance of your ATK X1 V2 mouse.
Image: ATK Blazing Sky X1 V2 Mouse branding.
2. Package Contents
Please check the contents of your package. The items included may vary slightly depending on the specific X1 V2 model (Ultimate/Extreme or Ultra Max).
Image: Product List detailing package contents for X1V2 Ultimate/Extreme and X1V2 Ultra Max.
For X1V2 Ultimate/Extreme Models:
- GEM8K receiver
- 8K data cable
- Gray double anti-sag foot pads
- Same Color Anti-Slip Sticker
- User Guide
- Warranty Certificate
- Safety Specification Guide
For X1V2 Ultra Max Model:
- New NANO8K Receiver
- 8K Data Cable
- Color-Matched Anti-Slip Sticker
- Adapter
- User Guide
- Warranty Certificate
- Safety Guidelines
3. Specifications
The ATK Blazing Sky X1 V2 series offers various models with distinct features. Refer to the table below for detailed specifications.
Image: Product Parameter Table, providing detailed specifications for all X1 V2 models.
| Feature | X1 V2 Ultra Max (2.0) | X1 V2 Ultimate (2.0) | X1 V2 Extreme (2.0) |
|---|---|---|---|
| Size | 127*64*40mm (for medium/large hands) | ||
| Color Matching | Black, White, Metal Red, Metal Silver, Metal Purple | ||
| Coating | Brand New Nano Coating | ||
| Sensor | PAW3395Ultra | PAW3950Ultra | |
| Main Control Chip | NORDIC 54L15 | NORDIC 54H20 | |
| Programmable | ATK Self-developed S4 Series Absolute Shark MAX Mouse Solution | ||
| Polling Rate | Wired/Wireless Dual 8K | ||
| Key Response Delay | 0.181ms | 0.163ms | |
| Battery | 800mAh | ||
| Battery Life (1000Hz) | 800+ hours | 265+ hours | |
| Weight | 55±2g | 54±2g | |
| Micro Key (Switch) | ATK optical mechanical micro-switch | ATK Custom Optical Switches | ATK Jiguang optical micro-switches |
| Scroll Wheel | TTC Gold Wheel | ||
| Foot Stickers | Standard gray double-layer Anti-sink foot pads | Standard high-content PTFE double-layer anti-sink foot pads | Complementary gray double-layer anti-sink foot pads |
| Receiver | New NANO8K Receiver | New GEM 8K receiver | |
The mouse features an ultra-lightweight design, with the X1V2 Extreme and Ultimate models weighing approximately 54g, and the X1V2 Ultra Max weighing approximately 55g.
Image: Visual representation of the mouse's ultra-lightweight design at 54g.
Image: Weight comparison table for X1V2 Extreme, Ultimate, and Ultra Max models.
4. Setup Guide
4.1 Connecting Your Mouse
Your ATK X1 V2 mouse supports both wireless and wired connections.
- Wireless Connection:
a. Locate the 8K receiver (GEM8K or NANO8K) included in your package.
b. Plug the receiver into an available USB port on your computer.
c. Turn on the mouse using the switch on its underside. The mouse should automatically connect to the receiver. - Wired Connection:
a. Connect the 8K data cable to the mouse and to an available USB port on your computer.
b. The mouse will function in wired mode and charge simultaneously.
Image: New GEM 8K receiver for high-speed data transmission.
4.2 Software Installation (ATK HUB 3.0)
To unlock the full potential of your ATK X1 V2 mouse, including customization of buttons, DPI settings, and polling rate, download and install the ATK HUB 3.0 software from the official ATK website.
Image: Screenshot of the ATK HUB 3.0 software interface.
4.3 System Requirements for 8KHz Polling Rate
For optimal performance with the 8KHz polling rate, ensure your computer meets the following minimum specifications:
- CPU: Intel Core i7-9700K or above, AMD Ryzen 7 3700X or above
- Monitor: Refresh rate above 240Hz
- Graphics: NVIDIA GTX1080 or above, AMD RX5700 or above
- Memory: 16GB or more
Image: Warm Tips image detailing minimum system requirements for optimal 8KHz usage.
5. Operating Instructions
5.1 Basic Usage
Once connected, your ATK X1 V2 mouse is ready for use. It features 4 programmable buttons and a scroll wheel. The default functions are standard left-click, right-click, scroll click, and two side buttons for forward/backward navigation.
5.2 Advanced Features
- High Polling Rate: The mouse supports a dual 8K wired/wireless polling rate, ensuring ultra-low latency and precise tracking.
- Flagship Sensor: Equipped with PAW3395Ultra or PAW3950Ultra sensors, the mouse offers precise capture of every subtle operation, resulting in faster, steadier, and more accurate movements.
- Custom Optical Switches: Depending on your model, the mouse features ATK optical mechanical micro-switches, ATK Custom Optical Switches, or ATK Jiguang optical micro-switches, providing quick response and a smooth, rapid-click experience with a long lifespan (up to 150 million cycles).
- Long Battery Life: The new high-density battery provides over 800 hours of battery life (at 1000Hz polling rate) for Ultra Max and Ultimate models, and over 265 hours for the Extreme model.
Image: High-density battery for extended use.
Image: PAW3950Ultra flagship sensor for precise tracking.
Image: ATK Custom Optical Switches.
Image: ATK Jiguang optical micro-switches.
5.3 Customization with ATK HUB 3.0
The ATK HUB 3.0 software allows you to:
- Remap mouse buttons.
- Adjust DPI sensitivity levels.
- Configure polling rate.
- Create macros.
- Manage profiles for different games or applications.
6. Maintenance
6.1 Cleaning
The ATK X1 V2 mouse features a new Nano coating that is sweat-resistant, stain-resistant, and easy to clean. To clean your mouse:
- Ensure the mouse is turned off and disconnected from your computer.
- Use a soft, damp cloth to gently wipe the surface of the mouse.
- For stubborn stains, a small amount of mild soap can be used, followed by wiping with a clean, damp cloth.
- Avoid using harsh chemicals or abrasive materials, as these can damage the coating.
Image: Nano coating for easy cleaning.
6.2 Foot Pads
The mouse is equipped with high-content PTFE double-layer anti-sink foot pads for stable and comfortable control. If the foot pads show significant wear, they can be replaced. Refer to the product list for details on obtaining replacement foot pads.
7. Troubleshooting
7.1 Mouse Not Responding
- Ensure the mouse is charged or connected via the data cable.
- Check if the wireless receiver is securely plugged into a USB port.
- Try plugging the receiver into a different USB port.
- If using wireless, ensure the mouse is turned on.
- Restart your computer.
7.2 8KHz Polling Rate Issues
If you experience performance issues when using the 8KHz polling rate, verify that your computer meets the recommended system requirements listed in Section 4.3. Insufficient CPU, monitor refresh rate, graphics card, or RAM can lead to instability or reduced performance at higher polling rates.
7.3 Software Not Detecting Mouse
- Ensure the mouse is properly connected (wired or wireless).
- Restart the ATK HUB 3.0 software.
- Try reinstalling the ATK HUB 3.0 software.
- Check for any conflicting mouse software or drivers.
8. User Tips
- Optimal 8KHz Performance: To fully utilize the 8KHz polling rate, ensure your system meets the recommended specifications (CPU, monitor refresh rate, graphics, and memory). This will prevent potential bottlenecks and ensure a smooth experience.
- Charging: Always use the original data cable provided to charge the mouse to ensure compatibility and optimal charging performance.
- Software Customization: Explore the ATK HUB 3.0 software to fine-tune DPI, button assignments, and macros to match your gaming style and preferences.
9. Warranty and Support
Your ATK Blazing Sky X1 V2 mouse comes with a Warranty Certificate and Safety Specification Guide included in the package. Please refer to these documents for detailed warranty information and safety guidelines.
For technical support, software downloads (ATK HUB 3.0), and further assistance, please visit the official ATK website or contact ATK customer service.